Home

  • Banner

Active filters
  • Categories: Enclosure
  • Categories: Motor Driver
On sale! Raspberry Pi 3 Transparent Acrylic Shell Case + Cooling Fan for Raspberry Pi 3 Quick view

Reference: RBD-0347

Transparent Acrylic Shell Case for Raspberry Pi 3 Model B/B+

(0)
9 Layer Acrylic stylish case with access to all Ports on Raspberry Pi 3 B/B+ Slot for Cooling Fan Easy to assemble with Nut-Bolts included Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel. RoboticsBD Note: Cooling fan is not included.
BDT 495.00
BDT 495.00 tax incl.
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 495.00 tax incl.
BDT 495.00 tax incl.
BDT 0.00 Tax
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 0.00 Tax
BDT 495.00 tax incl.
More
In-Stock
In stock: 9
Motor Shield L293D Robotics Bangladesh Quick view

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133
Out-of-Stock Raspberry Pi Case with Fan and Heatsink Quick view

Reference: RBD-0906

Raspberry Pi Case with Fan and Heatsink

(0)
Slot for Cooling Fan Easy to assemble with Nut-Bolts included. RoboticsBD Cut-out for micro SC card at the bottom panel This simple case provides tough protection for your raspberry pi along with access to ports High Quality two-piece injection-molded ABS enclosure Click together design, no screws, standoffs or elastic bands required It is easy to use....
BDT 440.00
BDT 440.00 tax incl.
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 440.00 tax incl.
BDT 440.00 tax incl.
BDT 0.00 Tax
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 0.00 Tax
BDT 440.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Big Easy Driver - Stepper Motor Driver Quick view

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600.00
BDT 1,600.00 tax incl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax incl.
BDT 1,600.00 tax incl.
BDT 0.00 Tax
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 0.00 Tax
BDT 1,600.00 tax incl.
More
Out-of-Stock
In stock: 0
Ultrasonic Sensor Acrylic Mounting Bracket Quick view

Reference: RBD-0920

Ultrasonic Sensor Acrylic Mounting Bracket

(0)
Acrylic Body. Easy to install. compatible with HC-SR04
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 100
- BDT 155.00 Reduced price 16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685 Robotics Bangladesh Quick view

Reference: RBD-0289

16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

(0)
Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED
BDT 525.00 BDT 680.00
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax incl.
More
In-Stock
In stock: 50
2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S Robotics Bangladesh Quick view

Reference: RBD-0921

2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S

(0)
PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 218
32 Channel USB UART Servo Motor Controller Quick view

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

(0)
Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
BDT 4,400.00
BDT 4,400.00 tax incl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax incl.
BDT 4,400.00 tax incl.
BDT 0.00 Tax
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 0.00 Tax
BDT 4,400.00 tax incl.
More
In-Stock
In stock: 12
Clear Acrylic Case For W1209 Digital Temperature Controller Robotics Bangladesh Quick view

Reference: RBD-1327

Clear Acrylic Case For W1209 Digital Temperature Controller

(0)
Package includes: 1 pcs x Acrylic Box ( without W1209 module ) DIY cover for W1209 Control Module   Acrylic material looks transparent(may need to tear down the film).   Easy for electronic enthusiasts to assemble.
BDT 110.00
BDT 110.00 tax incl.
BDT 110.00 tax excl.
BDT 110.00 tax excl.
BDT 110.00 tax incl.
BDT 110.00 tax incl.
BDT 0.00 Tax
BDT 110.00 tax excl.
BDT 110.00 tax excl.
BDT 0.00 Tax
BDT 110.00 tax incl.
More
In-Stock
In stock: 36
L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Quick view

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)
Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In Stock
In stock: 428
Acrylic Case Box with Cooling Fan for NVIDIA Jetson Nano Robotics Bangladesh Quick view

Reference: RBD-1410

Acrylic Case Box with Cooling Fan for NVIDIA Jetson Nano

(0)
Compatible with Nvidia Jetson Nano Easy to assemble Slots to access all ports Cut-out for a fan at the top
BDT 980.00
BDT 980.00 tax incl.
BDT 980.00 tax excl.
BDT 980.00 tax excl.
BDT 980.00 tax incl.
BDT 980.00 tax incl.
BDT 0.00 Tax
BDT 980.00 tax excl.
BDT 980.00 tax excl.
BDT 0.00 Tax
BDT 980.00 tax incl.
More
In-Stock
In stock: 14
Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A Robotics Bangladesh Quick view

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 6,650.00
BDT 6,650.00 tax incl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax incl.
BDT 6,650.00 tax incl.
BDT 0.00 Tax
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 0.00 Tax
BDT 6,650.00 tax incl.
More
In-Stock
In stock: 11
Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W Robotics Bangladesh Quick view

Reference: RBD-1413

Brand: Raspberry Pi Official

Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W

(0)
Material: ABS- 3 different cover board- Color: White & Red- Use For: Raspberry Pi Zero V1.3 and Raspberry Pi Zero W- Camera Cable Length: 37mm
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In-Stock
In stock: 15
Ardumoto Shield L298P Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13
Back to Back 4S AA Battery Holder Robotics Bangladesh Quick view

Reference: RBD-1692

Back to Back 4S AA Battery Holder

(0)
Color: Black lightweight Convenient to carry this battery box holder with wires Weight: About 9g Wire Length: Approx 14cm
BDT 160.00
BDT 160.00 tax incl.
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 160.00 tax incl.
BDT 160.00 tax incl.
BDT 0.00 Tax
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 0.00 Tax
BDT 160.00 tax incl.
More
In-Stock
In stock: 35
DRV8825 Stepper Motor Driver Module Quick view

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2
10 X 1.5V AA Back to Back Plastic Battery Holder with Wire Robotics Bangladesh Quick view

Reference: RBD-1742

10 X 1.5V AA Back to Back Plastic Battery Holder with Wire

(0)
Holds 10 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 78X 60 X 28 Weight: 27.4 gm Material: Plastic Internal Connection: Series
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 53
A4988 StepStick Stepper Motor Driver Module Quick view

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65
6 x AA Battery Holder Box (Back-to-Back) Robotics Bangladesh Quick view

Reference: RBD-1743

6 x AA Battery Holder Box (Back-to-Back)

(0)
Holds 6 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 58X 48 X 28 Weight: 15.6 gm Material: Plastic Internal Connection: Series
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 30
30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Shield module For Arduino Quick view

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4
Out-of-Stock Argon ONE M.2 Case for Raspberry Pi 4 Robotics Bangladesh Quick view

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7
DC 5V Stepper Motor + ULN2003 Driver Board (28BYJ-48) for Arduino Quick view

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

(0)
Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 104
Thermoelectric Peltier Refrigeration Cooling System DIY Kit Robotics Bangladesh Quick view

Reference: RBD-2159

Thermoelectric Peltier Refrigeration Cooling System DIY Kit

(0)
Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work. Small volume, does not occupy space, installation is simple. It can be used as a Pet Air Conditioner (chicken, little dog, etc.) or a little fridge. Lightweight, small size and easier to install. The kit does not include...
BDT 1,190.00
BDT 1,190.00 tax incl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax incl.
BDT 1,190.00 tax incl.
BDT 0.00 Tax
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 0.00 Tax
BDT 1,190.00 tax incl.
More
In-Stock
In stock: 17
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Quick view

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 11
Motor Driver - Dual TB6612FNG (1A) Robotics Bangladesh Quick view

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16
- BDT 20.00 Reduced price Arduino Uno R3 Bumper Robotics Bangladesh Quick view

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14
SSC-32 32Ch Servo Controller Lynxmotion Compatible Quick view

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

(0)
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
In-Stock
In stock: 7
Motor Driver 43A BTS7960 Robotics Bangladesh Quick view

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)
Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
BDT 670.00
BDT 670.00 tax incl.
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 670.00 tax incl.
BDT 670.00 tax incl.
BDT 0.00 Tax
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 0.00 Tax
BDT 670.00 tax incl.
More
In-Stock
In stock: 44
L297 Stepper Motor Controller IC Robotics Bangladesh Quick view

Reference: RBD-1606

L297 Stepper Motor Controller IC

(0)
Supply Voltage Range: 4.75V to 7V Driver Case Style: DIP No. of Pins: 20 Operating Temperature Range: -40°C to +150°C
BDT 96.00
BDT 96.00 tax incl.
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 96.00 tax incl.
BDT 96.00 tax incl.
BDT 0.00 Tax
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 0.00 Tax
BDT 96.00 tax incl.
More
In-Stock
In stock: 46
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28
Dual Channel Motor Driver Shield For Arduino Robotics Bangladesh Quick view

Reference: RBD-1635

Dual Channel Motor Driver Shield For Arduino

(0)
Logic control, 5V from Arduino main board Polarity protection for External motor power input 2 fast test buttons for each motor channel Motor Driven Voltage：6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source) Up to 2A current each channel Pin 4, 5,6,7 are used to drive two DC motor Support PWM speed control Support  advance speed control
BDT 1,399.00
BDT 1,399.00 tax incl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax incl.
BDT 1,399.00 tax incl.
BDT 0.00 Tax
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 0.00 Tax
BDT 1,399.00 tax incl.
More
In-Stock
In stock: 5
DC-5V-35V 5A PWM Motor Speed Controller Robotics Bangladesh Quick view

Reference: RBD-1724

DC-5V-35V 5A PWM Motor Speed Controller

(0)
Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 74
Back to top

Follow us on Facebook

Facebook