Home

  • Banner

3D Printed
3D Printed

3D Printed

3D Printed 

Active filters
Pack 3D Printed Robotics claw with servo motor Robotics Bangladesh 3D Printed Robotics claw with servo motor Robotics Bangladesh

Reference: RBD-0268

Brand: RoboticsBD

3D Printed Robotics claw with servo motor

(0)
3D printed robot claw designed for MG995 / MG996R servo motors Compatible with standard M3 bolts and nuts for easy assembly Strong and simple geometry suitable for DIY robotics projects Ideal for beginners to prototype and customize claw mechanisms Lightweight yet durable design for robotic arms and grippers Easy to integrate with Arduino, ESP32, and...
BDT 550
BDT 550 tax incl.
BDT 550 tax excl.
BDT 550 tax excl.
BDT 550 tax incl.
BDT 550 tax incl.
BDT 0 Tax
BDT 550 tax excl.
BDT 550 tax excl.
BDT 0 Tax
BDT 550 tax incl.
More 3D Printed Robotics claw with servo motor
Last items in stock
In stock: 3
HC-SR04 Ultrasonic Sensor Housing Robotics Bangladesh HC-SR04 Ultrasonic Sensor Housing Robotics Bangladesh

Reference: RBD-2696

HC-SR04 Ultrasonic Sensor Housing

(0)
Custom 3D-printed enclosure designed specifically for the HC-SR04 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. For convenient and secure mounting in various projects.Note: Filament Color may change as our stock rotates. 
BDT 85
BDT 85 tax incl.
BDT 85 tax excl.
BDT 85 tax excl.
BDT 85 tax incl.
BDT 85 tax incl.
BDT 0 Tax
BDT 85 tax excl.
BDT 85 tax excl.
BDT 0 Tax
BDT 85 tax incl.
More HC-SR04 Ultrasonic Sensor Housing
In-Stock
In stock: 11
3D Printer Nozzle M7 Thread Brass 1.

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190
BDT 190 tax incl.
BDT 190 tax excl.
BDT 190 tax excl.
BDT 190 tax incl.
BDT 190 tax incl.
BDT 0 Tax
BDT 190 tax excl.
BDT 190 tax excl.
BDT 0 Tax
BDT 190 tax incl.
More 3D Printer Nozzle M7 Thread Brass 1.75mm
In-Stock
In stock: 17
- BDT 20 Reduced price Arduino Uno R3 Bumper Robotics Bangladesh Arduino Uno R3 Bumper Robotics Bangladesh

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Bumper: Designed for Arduino Uno R3 boards Short Circuit Protection: Prevents accidental short circuits on conductive surfaces Secure Press-Fit: Ensures a snug fit while allowing easy removal Scratch Protection: Protects surfaces from scratches caused by the board Arduino Uno R3 is not included. 
BDT 30 BDT 50
BDT 50 BDT 30 tax incl.
BDT 50 BDT 30 tax excl.
BDT 50 BDT 30 tax excl.
BDT 50 BDT 30 tax incl.
BDT 50 BDT 30 tax incl.
BDT 0 BDT 0 Tax
BDT 50 BDT 30 tax excl.
BDT 50 BDT 30 tax excl.
BDT 0 BDT 0 Tax
BDT 50 BDT 30 tax incl.
More Arduino Uno R3 Bumper
In-Stock
In stock: 29
3D Pen 2nd Generation LED Display Screen with (6 Color Filament 50g) Robotics Bangladesh 3D Pen 2nd Generation LED Display Screen with (6 Color Filament 50g) Robotics Bangladesh

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen

(0)
Input Voltage: USB Power Temp: 160~190 Deg settable. Compatible Filament: 1.75 mm PLA This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or verticallyTo power the 3D pen, you will require a separate 5V 2A USB charger (Not Included). Please check Raspberry Pi 5V...
BDT 1,799
BDT 1,799 tax incl.
BDT 1,799 tax excl.
BDT 1,799 tax excl.
BDT 1,799 tax incl.
BDT 1,799 tax incl.
BDT 0 Tax
BDT 1,799 tax excl.
BDT 1,799 tax excl.
BDT 0 Tax
BDT 1,799 tax incl.
More 3D Pen 2nd Generation LED Display Screen
In-Stock
In stock: 39
- BDT 3,500 Reduced price Robotics Arm EEZYbotARM MK1 Robotics Bangladesh Robotics Arm EEZYbotARM MK1 Robotics Bangladesh

Reference: RBD-1163

Robotics Arm EEZYbotARM MK1

(0)
The design intent was to make something "easy" to make robotics arm It uses Mini servos for driving the kinematics linkage and you can use Arduino and a decent power supply (2A) to program and drive it. All the pieces are 3DPrinted in PLA.
BDT 3,099 BDT 6,599
BDT 6,599 BDT 3,099 tax incl.
BDT 6,599 BDT 3,099 tax excl.
BDT 6,599 BDT 3,099 tax excl.
BDT 6,599 BDT 3,099 tax incl.
BDT 6,599 BDT 3,099 tax incl.
BDT 0 BDT 0 Tax
BDT 6,599 BDT 3,099 tax excl.
BDT 6,599 BDT 3,099 tax excl.
BDT 0 BDT 0 Tax
BDT 6,599 BDT 3,099 tax incl.
More Robotics Arm EEZYbotARM MK1
Last items in stock
In stock: 2
Sold-out PLA Filament for 3D Pen Robotics Bangladesh

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 50
BDT 50 tax incl.
BDT 50 tax excl.
BDT 50 tax excl.
BDT 50 tax incl.
BDT 50 tax incl.
BDT 0 Tax
BDT 50 tax excl.
BDT 50 tax excl.
BDT 0 Tax
BDT 50 tax incl.
More PLA Filament for 3D Pen
Sold-out
In stock: 0
- BDT 651 Reduced price Pack Abs Material 2 Axis Pan Tilt Camera Mount With MG90 Robotics Bangladesh Abs Material 2 Axis Pan Tilt Camera Mount With MG90 Robotics Bangladesh

Reference: RBD-0356

Abs Material 2 Axis Pan Tilt Camera Mount With MG90

(0)
PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.
BDT 549 BDT 1,200
BDT 1,200 BDT 549 tax incl.
BDT 1,200 BDT 549 tax excl.
BDT 1,200 BDT 549 tax excl.
BDT 1,200 BDT 549 tax incl.
BDT 1,200 BDT 549 tax incl.
BDT 0 BDT 0 Tax
BDT 1,200 BDT 549 tax excl.
BDT 1,200 BDT 549 tax excl.
BDT 0 BDT 0 Tax
BDT 1,200 BDT 549 tax incl.
More Abs Material 2 Axis Pan Tilt Camera Mount With MG90
Sold-out
In stock: 0
Sold-out Holder for 10 mm LED light strip Robotics Bangladesh Holder for 10 mm LED light strip Robotics Bangladesh

Reference: RBD-1364

Holder for 10 mm LED light strip

(0)
10 mm LED light strips. Attached with a nail or a screw.
BDT 25
BDT 25 tax incl.
BDT 25 tax excl.
BDT 25 tax excl.
BDT 25 tax incl.
BDT 25 tax incl.
BDT 0 Tax
BDT 25 tax excl.
BDT 25 tax excl.
BDT 0 Tax
BDT 25 tax incl.
More Holder for 10 mm LED light strip
Sold-out
In stock: -2
3D Print Your Parts Robotics Bangladesh 3D Print Your Parts Robotics Bangladesh

Reference: RBD-0130

3D Print Your Parts

(0)
3d Printed
BDT 420
BDT 420 tax incl.
BDT 420 tax excl.
BDT 420 tax excl.
BDT 420 tax incl.
BDT 420 tax incl.
BDT 0 Tax
BDT 420 tax excl.
BDT 420 tax excl.
BDT 0 Tax
BDT 420 tax incl.
More 3D Print Your Parts
In - stock
In stock: 16
Jumper Wire housing 3 Pin Robotics Bangladesh Jumper Wire housing 3 Pin Robotics Bangladesh

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20
BDT 20 tax incl.
BDT 20 tax excl.
BDT 20 tax excl.
BDT 20 tax incl.
BDT 20 tax incl.
BDT 0 Tax
BDT 20 tax excl.
BDT 20 tax excl.
BDT 0 Tax
BDT 20 tax incl.
More Jumper Wire housing 3 Pin
In-Stock
In stock: 32
Jumper Wire housing 5 Pin Robotics Bangladesh Jumper Wire housing 5 Pin Robotics Bangladesh

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20
BDT 20 tax incl.
BDT 20 tax excl.
BDT 20 tax excl.
BDT 20 tax incl.
BDT 20 tax incl.
BDT 0 Tax
BDT 20 tax excl.
BDT 20 tax excl.
BDT 0 Tax
BDT 20 tax incl.
More Jumper Wire housing 5 Pin
In-Stock
In stock: 21
Jumper Wire housing 6 Pin Robotics Bangladesh Jumper Wire housing 6 Pin Robotics Bangladesh

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20
BDT 20 tax incl.
BDT 20 tax excl.
BDT 20 tax excl.
BDT 20 tax incl.
BDT 20 tax incl.
BDT 0 Tax
BDT 20 tax excl.
BDT 20 tax excl.
BDT 0 Tax
BDT 20 tax incl.
More Jumper Wire housing 6 Pin
In-Stock
In stock: 50
Jumper Wire housing 7 Pin Robotics Bangladesh Jumper Wire housing 7 Pin Robotics Bangladesh

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25
BDT 25 tax incl.
BDT 25 tax excl.
BDT 25 tax excl.
BDT 25 tax incl.
BDT 25 tax incl.
BDT 0 Tax
BDT 25 tax excl.
BDT 25 tax excl.
BDT 0 Tax
BDT 25 tax incl.
More Jumper Wire housing 7 Pin
In-Stock
In stock: 19
Jumper Wire housing 8 Pin Robotics Bangladesh Jumper Wire housing 8 Pin Robotics Bangladesh

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25
BDT 25 tax incl.
BDT 25 tax excl.
BDT 25 tax excl.
BDT 25 tax incl.
BDT 25 tax incl.
BDT 0 Tax
BDT 25 tax excl.
BDT 25 tax excl.
BDT 0 Tax
BDT 25 tax incl.
More Jumper Wire housing 8 Pin
In-Stock
In stock: 20
- BDT 40 Reduced price Jumper Wire housing 4Pin Robotics Bangladesh Jumper Wire housing 4Pin Robotics Bangladesh

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 20 BDT 60
BDT 60 BDT 20 tax incl.
BDT 60 BDT 20 tax excl.
BDT 60 BDT 20 tax excl.
BDT 60 BDT 20 tax incl.
BDT 60 BDT 20 tax incl.
BDT 0 BDT 0 Tax
BDT 60 BDT 20 tax excl.
BDT 60 BDT 20 tax excl.
BDT 0 BDT 0 Tax
BDT 60 BDT 20 tax incl.
More Jumper Wire housing 4Pin
In-Stock
In stock: 25
Sold-out 4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm Robotics Bangladesh 4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm Robotics Bangladesh

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499
BDT 13,499 tax incl.
BDT 13,499 tax excl.
BDT 13,499 tax excl.
BDT 13,499 tax incl.
BDT 13,499 tax incl.
BDT 0 Tax
BDT 13,499 tax excl.
BDT 13,499 tax excl.
BDT 0 Tax
BDT 13,499 tax incl.
More 4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm
Sold-out
In stock: 0
US-015 Ultrasonic Module Housing Robotics Bangladesh US-015 Ultrasonic Module Housing Robotics Bangladesh

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects.Note: Filament Color may change as our stock rotates. 
BDT 80
BDT 80 tax incl.
BDT 80 tax excl.
BDT 80 tax excl.
BDT 80 tax incl.
BDT 80 tax incl.
BDT 0 Tax
BDT 80 tax excl.
BDT 80 tax excl.
BDT 0 Tax
BDT 80 tax incl.
More US-015 Ultrasonic Module Housing
In-Stock
In stock: 14
Pack PIR HC-SR501 Housing Robotics Bangladesh PIR HC-SR501 Housing Robotics Bangladesh

Reference: RBD-3032

PIR HC-SR501 Housing

(0)
Purpose: Protective enclosure for PIR HC-SR501 motion sensor Special Design: Accommodates the sensor at a 45-degree angle Material: PLA, offering protection against dust and moisture Affordable and Functional: Designed for cost-effectiveness while maintaining durability HC-SR501 PIR Motion Sensor included*
BDT 155
BDT 155 tax incl.
BDT 155 tax excl.
BDT 155 tax excl.
BDT 155 tax incl.
BDT 155 tax incl.
BDT 0 Tax
BDT 155 tax excl.
BDT 155 tax excl.
BDT 0 Tax
BDT 155 tax incl.
More PIR HC-SR501 Housing
In-Stock
In stock: 9
Pack 9g Micro Servo Robot Gripper Robotics Bangladesh 9g Micro Servo Robot Gripper Robotics Bangladesh

Reference: RBD-3043

9g Micro Servo Robot Gripper

(0)
Lightweight and customizable 3D-printed robotic gripper. Controlled by a precise SG90 9g micro servo motor. Adjustable grip for handling objects of varying sizes. Easy to assemble and use for a variety of robotics applications. Ideal for educational, DIY, and hobbyist projects.
BDT 680
BDT 680 tax incl.
BDT 680 tax excl.
BDT 680 tax excl.
BDT 680 tax incl.
BDT 680 tax incl.
BDT 0 Tax
BDT 680 tax excl.
BDT 680 tax excl.
BDT 0 Tax
BDT 680 tax incl.
More 9g Micro Servo Robot Gripper
Last items in stock
In stock: 3
Arduino Uno Breadboard Mounting Platform Robotics Bangladesh Arduino Uno Breadboard Mounting Platform Robotics Bangladesh

Reference: RBD-3044

Arduino Uno Breadboard Mounting Platform

(0)
Integrated platform for Arduino Uno and breadboard. Secure support to prevent accidental dislodgement during projects. Enhances stability and organization for electronics prototyping. Streamlines workflow by offering a dedicated workspace. Space-saving design for improved workspace efficiency.Arduino Uno and Breadboard not included.
BDT 30
BDT 30 tax incl.
BDT 30 tax excl.
BDT 30 tax excl.
BDT 30 tax incl.
BDT 30 tax incl.
BDT 0 Tax
BDT 30 tax excl.
BDT 30 tax excl.
BDT 0 Tax
BDT 30 tax incl.
More Arduino Uno Breadboard Mounting Platform
In-Stock
In stock: 18
360pcs Brass Heat Set Inserts Kit Threaded Knurled Nuts for Plastic & 3D Printing Robotics Bangladesh 360pcs Brass Heat Set Inserts Kit Threaded Knurled Nuts for Plastic & 3D Printing Robotics Bangladesh

Reference: RBD-3558

360pcs Brass Heat Set Inserts Kit Threaded Knurled Nuts for Plastic & 3D Printing

(0)
Upgrade your prototyping and manufacturing workflow with this comprehensive 360PCS Brass Heat Set Insert Kit, designed specifically for creating strong, durable threads in plastic components. Ideal for 3D printing and injection molding, this set includes a wide range of insert sizes from M2 to M6, housed neatly in an organized storage box for easy access...
BDT 2,550
BDT 2,550 tax incl.
BDT 2,550 tax excl.
BDT 2,550 tax excl.
BDT 2,550 tax incl.
BDT 2,550 tax incl.
BDT 0 Tax
BDT 2,550 tax excl.
BDT 2,550 tax excl.
BDT 0 Tax
BDT 2,550 tax incl.
More 360pcs Brass Heat Set Inserts Kit Threaded Knurled Nuts for Plastic & 3D Printing
In stock
In stock: 6
Back to top

Follow us on Facebook

Facebook