
Reference: RBD-0452
Banner
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
The 1746-NIO4I by Allen Bradley is an analog combination module in the SLC 500 series. This module has four total analog channels; in a single slot module, it has two (2) inputs and two (2) outputs with a common voltage mode of -20 to 20 Volts. The common rejection module signal at 60 Hertz is 105 dB; its normal rejection mode signal at 60 Hertz is 55 dB. Its backplane current draw at 5 Volts is 55 mA, whereas with 24 Volts, it increases to 145 mA. This module must receive both 5 and 24 Volts of power from the backplane source of the SLC 500 setup; some similar modules may require an external power source, but the 1746-NIO4I will not work with one. RoboticsBD
Allen-Bradley 1746-NO4I 4-channel analog output modules provide 14-bit resolution and a 2.5 ms conversion rate. The 1746-NO4I Analog Output modules feature user-selectable current outputs, backplane isolation, removable terminal blocks, and diagnostic feedback. Required Removable Terminal Block: 1746-RT27. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
General Specification | |
Manufacturer | Allen-Bradley / Rockwell Automation |
Series | SLC 500 |
Part Number | 1746-NIO4I |
Product Type | Combination I/O Module |
Channels. | 4 Non-isolated |
Number of Outputs | 4 current outputs (0…20 mA), |
Individually isolated | no |
Backplane Current Load | 55 mA @ 5V, 195 mA @ 24V |
Step Response @ 95% | 2.5 ms |
Resolution (bits), Max | 14 |
Non–linearity | 0.05% |
Conversion Method | R-2R Ladder |
Load Range | 0 to 500 Ohms |
Maximum Load Reactance | 100 µH |
Full Scale | 21 mA |
Overall Accuracy at +25° C (77° F) (max.) | ±0.298% of full scale. |
Shipment Weight | 0.393 kg |
Shipment Dimensions | 22 × 16 × 6 cm |
Please allow 5% measuring deviation due to manual measurement.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
1 x Allen Bradley 1746 NIO4I
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RBD-0452
Reference: RBD-0528
Reference: RBD-0545
Reference: RBD-0518
Reference: RBD-0536
Reference: RBD-0504
Reference: RBD-0509
Reference: RBD-0512
Reference: RBD-0481
Reference: RBD-0469
Reference: RBD-0472
Reference: RBD-0516
Reference: RBD-1127
Reference: RBD-0533
Reference: RBD-0584
Reference: RBD-0585
Reference: RBD-0723
Reference: RBD-1081
Brand: Raspberry Pi Official
Reference: RBD-1082
Brand: Raspberry Pi Official
Reference: RBD-1083
Reference: RBD-1084
Brand: Raspberry Pi Official
Reference: RBD-1085
Reference: RBD-1774
check_circle
check_circle