Home

  • Banner

  • Sold-out
XBee Pro S1 Robotics Bangladesh
  • XBee Pro S1 Robotics Bangladesh

XBee Pro S1

RBD-1310

  • Supply voltage  2.8 - 3.4 V
  • Transmit current (typical) 340 mA (@3.3 V) (180 mA for international variant)
  • Idle/receive current (typical) 55 mA (@ 3.3 V)
  • Power-down current < 10 uA
BDT 2,200
BDT 2,200 BDT 2,200 BDT 2,200 BDT 2,200
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 2,200 Tax excluded
BDT 2,200 Tax included
BDT 0 Tax
BDT 2,200 Tax excluded
BDT 0 Tax
BDT 2,200 Tax included

Tax excluded

Quantity
Sold-out

2 people have purchased this item
There are not enough products in stock
Description

The series 1 802.15.4 protocol 1mW with wire antenna. Its good for point-to-point, multipoint and convertible to a mesh network point. We suggest this module for those starting out as it is the easiest to get going: if there are two XBees in the same area they will automatically 'sync' and pass serial data back and forth without any additional work or configuration

What we like about the Series 1 modules is that they are so easy to get set up. If you have two in range, they will automatically form a serial link with no configuration, so you can send TTL serial data back and forth. You can also configure the baudrate, as well as sleep modes, power modes and tons more stuff using the Digi XBee tool.

The pins on an XBee are 2mm spacing, not 0.1" so they will not fit into a breadboard. For that reason, they work best in our XBee adapter module kit (which has a 250mA 3.3V regulator) or with the USB XBee adapter.

This module comes with a wire antenna, its the same price as a chip antenna but 50% more range because of the improved antenna, awesome! Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features:

  1. Indoor/urban range  Up to 300 ft. (90 m) 
  2. Outdoor RF line-of-sight range Up to 2500 ft (750 m)international variant
  3. Transmit power output (software selectable) 10 mW (10 dBm) for international variant
  4. RF data rate 250,000 b/s
  5. Serial interface data rate (software selectable) 1200 bps - 250 kb/s (non-standard baud rates also supported)
  6. Receiver sensitivity (typical) 100 dBm (1% packet error rate)

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Operating frequency bandISM 2.4 GHz
Dimensions2.438 cm x 3.294 cm
Operating temperature-40 to 85ºC (industrial)
Antenna optionsIntegrated whip antenna, embedded PCB antenna, U.FL connector, RPSMA connector
Shipment Weight0.005 kg
Shipment Dimensions2.7 × 2.4 × 0.9 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation:

  1. Datasheet

Package Includes:

1 x XBee Pro S1

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-1310

Specific References

EAN13
1310
Comments (0)
Grade
No customer reviews for the moment.
6 other products in the same category:
CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port Robotics Bangladesh CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port Robotics Bangladesh

Reference: RBD-2136

CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port

(0)
Very Few External Components Excellent Receiver Sensitivity and Robustness to Interference. Programmable Output Power Up to 4.5 dBm. High-Quality Construction
BDT 940
BDT 940 tax incl.
BDT 940 tax excl.
BDT 940 tax excl.
BDT 940 tax incl.
BDT 940 tax incl.
BDT 0 Tax
BDT 940 tax excl.
BDT 940 tax excl.
BDT 0 Tax
BDT 940 tax incl.
More CC2530F256 Zigbee UART Wireless Core Development Board with Serial Port
In-Stock
In stock: 16
CC2530+CC2591 Zigbee Module Wireless Power Amplification Development Board with SMA Antenna Robotics Bangladesh

Reference: RBD-2295

CC2530+CC2591 Zigbee Module Wireless Power Amplification Development Board with SMA Antenna

(0)
CC2530+CC2591 Zigbee Module with integrated power amplification for long-range communication Built with TI's CC2530F256 chip for robust 2.4GHz ZigBee and IEEE 802.15.4 applications Transmit power of 2.5mW, achieving communication distances up to 800 meters Small, compact design with strong anti-interference capability SMA antenna included for enhanced...
BDT 1,190
BDT 1,190 tax incl.
BDT 1,190 tax excl.
BDT 1,190 tax excl.
BDT 1,190 tax incl.
BDT 1,190 tax incl.
BDT 0 Tax
BDT 1,190 tax excl.
BDT 1,190 tax excl.
BDT 0 Tax
BDT 1,190 tax incl.
More CC2530+CC2591 Zigbee Module Wireless Power Amplification Development Board with SMA Antenna
In-Stock
In stock: 8
Pre Order XBee 1mW Trace Antenna - Series 1 (802.15. XBee 1mW Trace Antenna - Series 1 (802.15.

Reference: RBD-0166

XBee 1mW Trace Antenna - Series 1 (802.15.4)

(0)
Description: This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point...
BDT 2,350
BDT 2,350 tax incl.
BDT 2,350 tax excl.
BDT 2,350 tax excl.
BDT 2,350 tax incl.
BDT 2,350 tax incl.
BDT 0 Tax
BDT 2,350 tax excl.
BDT 2,350 tax excl.
BDT 0 Tax
BDT 2,350 tax incl.
More XBee 1mW Trace Antenna - Series 1 (802.15.4)
Pre Order
In stock: 0
Sold-out XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh) Robotics Bangladesh XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh) Robotics Bangladesh

Reference: RBD-0369

Brand: SparkFun Electronics

XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh)

(0)
Supports binding and multicasting for home automation Mesh-network topology 2.4 GHz for worldwide deployment Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board Firmware upgrades via UART, SPI or over the air TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC DATA RATE: 250kbps Max RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile...
BDT 3,500
BDT 3,500 tax incl.
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 3,500 tax incl.
BDT 3,500 tax incl.
BDT 0 Tax
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 0 Tax
BDT 3,500 tax incl.
More XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh)
Sold-out
In stock: -1
XBee USB Adapter Robotics Bangladesh XBee USB Adapter Robotics Bangladesh

Reference: RBD-0282

XBee USB Adapter

(0)
Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU
BDT 480
BDT 480 tax incl.
BDT 480 tax excl.
BDT 480 tax excl.
BDT 480 tax incl.
BDT 480 tax incl.
BDT 0 Tax
BDT 480 tax excl.
BDT 480 tax excl.
BDT 0 Tax
BDT 480 tax incl.
More XBee USB Adapter
In-Stock
In stock: 6
Xbee Shield for Arduino (without Xbee) Robotics Bangladesh Xbee Shield for Arduino (without Xbee) Robotics Bangladesh

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)
Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.
BDT 1,200
BDT 1,200 tax incl.
BDT 1,200 tax excl.
BDT 1,200 tax excl.
BDT 1,200 tax incl.
BDT 1,200 tax incl.
BDT 0 Tax
BDT 1,200 tax excl.
BDT 1,200 tax excl.
BDT 0 Tax
BDT 1,200 tax incl.
More Xbee Shield for Arduino (without Xbee)
Last items in stock
In stock: 2
Xbee Shield For Arduino V03 Robotics Bangladesh Xbee Shield For Arduino V03 Robotics Bangladesh

Reference: RBD-0985

Xbee Shield For Arduino V03

(0)
Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.
BDT 490
BDT 490 tax incl.
BDT 490 tax excl.
BDT 490 tax excl.
BDT 490 tax incl.
BDT 490 tax incl.
BDT 0 Tax
BDT 490 tax excl.
BDT 490 tax excl.
BDT 0 Tax
BDT 490 tax incl.
More Xbee Shield For Arduino V03
In-Stock
In stock: 22
Arduino Uno R3 Robotics Bangladesh Arduino Uno R3 Robotics Bangladesh

Reference: RBD-0094

Arduino Uno R3

(0)
The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
BDT 988
BDT 988 tax incl.
BDT 988 tax excl.
BDT 988 tax excl.
BDT 988 tax incl.
BDT 988 tax incl.
BDT 0 Tax
BDT 988 tax excl.
BDT 988 tax excl.
BDT 0 Tax
BDT 988 tax incl.
More Arduino Uno R3
In-Stock
In stock: 480
- BDT 16 Reduced price RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)
Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz
BDT 175 BDT 191
BDT 191 BDT 175 tax incl.
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax incl.
BDT 191 BDT 175 tax incl.
BDT 0 BDT 0 Tax
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax excl.
BDT 0 BDT 0 Tax
BDT 191 BDT 175 tax incl.
More RC522 RFID Card Reader Module Kit Android NFC supported
In-Stock
In stock: 66
- BDT 15 Reduced price K Type Thermocouple Sensor Probe for Temperature Controller Robotics Bangladesh

Reference: RBD-0319

K Type Thermocouple Sensor Probe for Temperature Controller

(0)
Type K Type.  Mounting thread: M6  Temperature Range:0-600°C. RoboticsBD
BDT 285 BDT 300
BDT 300 BDT 285 tax incl.
BDT 300 BDT 285 tax excl.
BDT 300 BDT 285 tax excl.
BDT 300 BDT 285 tax incl.
BDT 300 BDT 285 tax incl.
BDT 0 BDT 0 Tax
BDT 300 BDT 285 tax excl.
BDT 300 BDT 285 tax excl.
BDT 0 BDT 0 Tax
BDT 300 BDT 285 tax incl.
More K Type Thermocouple Sensor Probe for Temperature Controller
In-Stock
In stock: 107
- BDT 50 Reduced price Liquid Level Sensor for Arduino (WaveShare) Robotics Bangladesh Liquid Level Sensor for Arduino (WaveShare) Robotics Bangladesh

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

(0)
Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm
BDT 449 BDT 499
BDT 499 BDT 449 tax incl.
BDT 499 BDT 449 tax excl.
BDT 499 BDT 449 tax excl.
BDT 499 BDT 449 tax incl.
BDT 499 BDT 449 tax incl.
BDT 0 BDT 0 Tax
BDT 499 BDT 449 tax excl.
BDT 499 BDT 449 tax excl.
BDT 0 BDT 0 Tax
BDT 499 BDT 449 tax incl.
More Liquid Level Sensor for Arduino (WaveShare)
In-Stock
In stock: 18
- BDT 2 Reduced price Rain & Steam Detection Sensor Module Robotics Bangladesh Rain & Steam Detection Sensor Module Robotics Bangladesh

Reference: RBD-0665

Rain & Steam Detection Sensor Module

(0)
Operating voltage: 5V Provide both digital and analog output Adjustable sensitivity. RoboticsBD Output LED indicator Compatible with Arduino TTL Compatible Bolt holes for easy installation
BDT 78 BDT 80
BDT 80 BDT 78 tax incl.
BDT 80 BDT 78 tax excl.
BDT 80 BDT 78 tax excl.
BDT 80 BDT 78 tax incl.
BDT 80 BDT 78 tax incl.
BDT 0 BDT 0 Tax
BDT 80 BDT 78 tax excl.
BDT 80 BDT 78 tax excl.
BDT 0 BDT 0 Tax
BDT 80 BDT 78 tax incl.
More Rain & Steam Detection Sensor Module
In-Stock
In stock: 122
DHT11 Temperature and Relative Humidity Sensor Module for Arduino Robotics Bangladesh

Reference: RBD-0667

DHT11 Temperature and Relative Humidity Sensor Module for Arduino

(0)
Input Supply Voltage (VDC): 3.3 ~ 5. Supply Current (mA): measurement 0.3mA standby 60μA. Temperature measurement range: 0~50 degrees. Temperature measurement error: ±2 degrees. Humidity measurement range: 20%~95%RH. Humidity measurement error: ±5%RH. RoboticsBD
BDT 120
BDT 120 tax incl.
BDT 120 tax excl.
BDT 120 tax excl.
BDT 120 tax incl.
BDT 120 tax incl.
BDT 0 Tax
BDT 120 tax excl.
BDT 120 tax excl.
BDT 0 Tax
BDT 120 tax incl.
More DHT11 Temperature and Relative Humidity Sensor Module for Arduino
In-Stock
In stock: 62
9V Battery to 2.1mm for Arduino Uno Robotics Bangladesh

Reference: RBD-0732

9V Battery to 2.1mm for Arduino Uno

(0)
Excellent material It is an environmental 9V battery buckle The Cable Length: 12cm Approx. Convenient for connecting a battery to your application. Save power and protect the environment Good electrical conductivity and comfortable sense of touch
BDT 22
BDT 22 tax incl.
BDT 22 tax excl.
BDT 22 tax excl.
BDT 22 tax incl.
BDT 22 tax incl.
BDT 0 Tax
BDT 22 tax excl.
BDT 22 tax excl.
BDT 0 Tax
BDT 22 tax incl.
More 9V Battery to 2.1mm for Arduino Uno
In-Stock
In stock: 487
You might also like
Sold-out XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh) Robotics Bangladesh XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh) Robotics Bangladesh

Reference: RBD-0369

Brand: SparkFun Electronics

XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh)

(0)
Supports binding and multicasting for home automation Mesh-network topology 2.4 GHz for worldwide deployment Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board Firmware upgrades via UART, SPI or over the air TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC DATA RATE: 250kbps Max RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile...
BDT 3,500
BDT 3,500 tax incl.
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 3,500 tax incl.
BDT 3,500 tax incl.
BDT 0 Tax
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 0 Tax
BDT 3,500 tax incl.
More XBee Pro 63mW RPSMA - Series 2B (ZigBee Mesh)
Sold-out
In stock: -1
Xbee Shield For Arduino V03 Robotics Bangladesh Xbee Shield For Arduino V03 Robotics Bangladesh

Reference: RBD-0985

Xbee Shield For Arduino V03

(0)
Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.
BDT 490
BDT 490 tax incl.
BDT 490 tax excl.
BDT 490 tax excl.
BDT 490 tax incl.
BDT 490 tax incl.
BDT 0 Tax
BDT 490 tax excl.
BDT 490 tax excl.
BDT 0 Tax
BDT 490 tax incl.
More Xbee Shield For Arduino V03
In-Stock
In stock: 22
XBee USB Adapter Robotics Bangladesh XBee USB Adapter Robotics Bangladesh

Reference: RBD-0282

XBee USB Adapter

(0)
Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU
BDT 480
BDT 480 tax incl.
BDT 480 tax excl.
BDT 480 tax excl.
BDT 480 tax incl.
BDT 480 tax incl.
BDT 0 Tax
BDT 480 tax excl.
BDT 480 tax excl.
BDT 0 Tax
BDT 480 tax incl.
More XBee USB Adapter
In-Stock
In stock: 6

Follow us on Facebook

Facebook