• Banner

  • Reduced price
RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh
  • RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh
  • RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh
  • RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh

RC522 RFID Card Reader Module Kit Android NFC supported

RBD-0313

  • Low power consumption,
  • Low cost, and
  • Compact size
  • Read and write chip
  • Fully integrated at 13.56MHz
BDT 191BDT 191 BDT 191 BDT 191 BDT 191
BDT 175 Save BDT 16
BDT 175 BDT 175 BDT 175 BDT 175
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 191 BDT 175 Tax excluded
BDT 191 BDT 175 Tax included
BDT 0 BDT 0 Tax
BDT 191 BDT 175 Tax excluded
BDT 0 BDT 0 Tax
BDT 191 BDT 175 Tax included
Quantity
In-Stock
66 Items

1010 people have purchased this item
27 people recently added this item to the cart
66 items in stock
Description

This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost, and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices.

It uses an advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deals with ISO14443A frames and error correction.

This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance.Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features :

  1. Highly integrated analog circuitry to demodulate and decode responses.
  2. Supports ISO/IEC 14443 A/MIFARE.
  3. Typical operating distance in reading/Write mode up to 50 mm.
  4. Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd.
  5. SPI up to 10 Mbit/s.
  6. FIFO buffer handles 64 bytes send and receive.
  7. Flexible interrupt modes.
  8. Power-down by software mode.
  9. Programmable Timer.
  10. 2.5 V to 3.3 V power supply.
  11. CRC coprocessor.
  12. Internal self-test.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Input Supply voltage (V)3.3V (Do not use 5V supply)
Operating Current (mA)13 ~ 26
Operating Frequency (MHz)13.56
SPI data rate (Mbit/s)10
operating distance in reading/Write mode (mm)50
Length (mm)60
Width (mm)39.5
Height (mm)5
Weight (gm)20
Shipment Weight0.022 kg
Shipment Dimensions6 × 5 × 3 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation :

  1. MFRC522
  2. Arduino Playground
  3. Arduino RC522 RFID Door Unlock.
  4. Arduino RFID Reader RC522 + Access Control System.
  5. Github Page.

Package Includes

1 x RFID-RC522 Module
1 x Standard empty RC522 Card
1 x Break away pin straight

1 x Break away pin 90 degree 
1 x RC522 Key.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-0313
66 Items

Specific References

EAN13
0313
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Arduino Bootloader AVR ISP Shield for Bootloader Burning Robotics Bangladesh Arduino Bootloader AVR ISP Shield for Bootloader Burning Robotics Bangladesh

Reference: RBD-3854

Arduino Bootloader AVR ISP Shield for Bootloader Burning

(0)
The Arduino Bootloader Shield AVR ISP Programmable Expansion Board is a versatile and easy-to-use shield designed for burning bootloaders and modifying fuse bits on Arduino-compatible microcontrollers and other AVR-based boards.
BDT 610
BDT 610 tax incl.
BDT 610 tax excl.
BDT 610 tax excl.
BDT 610 tax incl.
BDT 610 tax incl.
BDT 0 Tax
BDT 610 tax excl.
BDT 610 tax excl.
BDT 0 Tax
BDT 610 tax incl.
More Arduino Bootloader AVR ISP Shield for Bootloader Burning
In stock
In stock: 14
Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display Robotics Bangladesh

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

(0)
Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
BDT 3,099
BDT 3,099 tax incl.
BDT 3,099 tax excl.
BDT 3,099 tax excl.
BDT 3,099 tax incl.
BDT 3,099 tax incl.
BDT 0 Tax
BDT 3,099 tax excl.
BDT 3,099 tax excl.
BDT 0 Tax
BDT 3,099 tax incl.
More Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display
In-Stock
In stock: 8
Flame Sensor Module Robotics Bangladesh Flame Sensor Module Robotics Bangladesh

Reference: RBD-2100

Flame Sensor Module Digital & Analog Output

(0)
Comparator chip LM393 makes module readings stable. Operating voltage 3.3V-5V. Fast Response Time Sensitivity adjustable Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection range: up to 100 cm. Adjustable detection range. Detection angle about 60 degrees, it is sensitive to the flame spectrum.
BDT 85
BDT 85 tax incl.
BDT 85 tax excl.
BDT 85 tax excl.
BDT 85 tax incl.
BDT 85 tax incl.
BDT 0 Tax
BDT 85 tax excl.
BDT 85 tax excl.
BDT 0 Tax
BDT 85 tax incl.
More Flame Sensor Module Digital & Analog Output
In-Stock
In stock: 190
WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F Robotics Bangladesh WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F Robotics Bangladesh

Reference: RBD-1602

WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F

(0)
Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max
BDT 516
BDT 516 tax incl.
BDT 516 tax excl.
BDT 516 tax excl.
BDT 516 tax incl.
BDT 516 tax incl.
BDT 0 Tax
BDT 516 tax excl.
BDT 516 tax excl.
BDT 0 Tax
BDT 516 tax incl.
More WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F
In-Stock
In stock: 33
Digital Temperature Module Robotics Bangladesh Digital Temperature Module Robotics Bangladesh

Reference: RBD-2084

Digital Temperature Module

(0)
Power supply: 3 – 5V Good sensitivity The output format: Digital switching output (0 and 1) The comparator output signal is clean, good waveform, driving ability, more than 15mA. A fixed bolt holes for easy installation. Using a wide voltage LM393 comparator.
BDT 95
BDT 95 tax incl.
BDT 95 tax excl.
BDT 95 tax excl.
BDT 95 tax incl.
BDT 95 tax incl.
BDT 0 Tax
BDT 95 tax excl.
BDT 95 tax excl.
BDT 0 Tax
BDT 95 tax incl.
More Digital Temperature Module
In-Stock
In stock: 138
ESP8266 Serial WiFi Expansion Board Module for Arduino Robotics Bangladesh

Reference: RBD-3682

ESP8266 Serial WiFi Expansion Board Module for Arduino

(0)
32-bit RISC architecture The processor can operate at 80MHz / 160MHz 32MB flash memory 64kB for instructions 96kB for data Standard native WiFi 802.11b / g / n Operates in AP, Station or AP + Station mode
BDT 510
BDT 510 tax incl.
BDT 510 tax excl.
BDT 510 tax excl.
BDT 510 tax incl.
BDT 510 tax incl.
BDT 0 Tax
BDT 510 tax excl.
BDT 510 tax excl.
BDT 0 Tax
BDT 510 tax incl.
More ESP8266 Serial WiFi Expansion Board Module for Arduino
In stock
In stock: 20
Analog Temperature Sensor Module Robotics Bangladesh Analog Temperature Sensor Module Robotics Bangladesh

Reference: RBD-2083

Analog Temperature Sensor Module

(0)
Operating Voltage : 5v. Temperature measurement range : -55°C to 125°C. Measurement Accuracy : ±0.5°C.
BDT 75
BDT 75 tax incl.
BDT 75 tax excl.
BDT 75 tax excl.
BDT 75 tax incl.
BDT 75 tax incl.
BDT 0 Tax
BDT 75 tax excl.
BDT 75 tax excl.
BDT 0 Tax
BDT 75 tax incl.
More Analog Temperature Sensor Module
In-Stock
In stock: 28
3.5inch HDMI Display-B Robotics Bangladesh 3.5inch HDMI Display-B Robotics Bangladesh

Reference: RBD-1929

3.5inch HDMI Display-B

(0)
General-purpose HDMI display, Connecting computers, TV boxes, Microsoft Xbox360, SONY PS4, Nintendo Switch and so on Can be used as Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, Win10 IOT, single-touch, free drive Can be used as PC monitor, support Win7, Win8, Win10 system (No touch Function)
BDT 3,800
BDT 3,800 tax incl.
BDT 3,800 tax excl.
BDT 3,800 tax excl.
BDT 3,800 tax incl.
BDT 3,800 tax incl.
BDT 0 Tax
BDT 3,800 tax excl.
BDT 3,800 tax excl.
BDT 0 Tax
BDT 3,800 tax incl.
More 3.5inch HDMI Display-B
In-Stock
In stock: 8
8 Channel 5V Relay Module Robotics Bangladesh

Reference: RBD-1948

8 Channel 5V Relay Module

(0)
Channel: 8 channel Relay Operating Voltage: 5V One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for the avoidance of malfunction Power supply indicator and Control indicator lamp Power supply and relay instructions, lit, the disconnect is offNote: Relay might be...
BDT 710
BDT 710 tax incl.
BDT 710 tax excl.
BDT 710 tax excl.
BDT 710 tax incl.
BDT 710 tax incl.
BDT 0 Tax
BDT 710 tax excl.
BDT 710 tax excl.
BDT 0 Tax
BDT 710 tax incl.
More 8 Channel 5V Relay Module
In-Stock
In stock: 52
USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK Robotics Bangladesh

Reference: RBD-0108

USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK

(0)
Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host) Supports HID devices, such as keyboards, mice, joysticks, etc. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard...
BDT 850
BDT 850 tax incl.
BDT 850 tax excl.
BDT 850 tax excl.
BDT 850 tax incl.
BDT 850 tax incl.
BDT 0 Tax
BDT 850 tax excl.
BDT 850 tax excl.
BDT 0 Tax
BDT 850 tax incl.
More USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK
In-Stock
In stock: 33
Mini MP1584EN DC-DC BUCK Adjustable Step Down Module Robotics Bangladesh Mini MP1584EN DC-DC BUCK Adjustable Step Down Module Robotics Bangladesh

Reference: RBD-1769

Mini MP1584EN DC-DC BUCK 5V Step Down Module

(0)
Input Voltage: 4.5V – 18V Output Voltage: 5V Output Current:  1.8A (typical), 3.0A (max). Ceramic Capacitor Stable Internal Soft-Start Internally Set Current Limit without a Current Sensing Resistor
BDT 95
BDT 95 tax incl.
BDT 95 tax excl.
BDT 95 tax excl.
BDT 95 tax incl.
BDT 95 tax incl.
BDT 0 Tax
BDT 95 tax excl.
BDT 95 tax excl.
BDT 0 Tax
BDT 95 tax incl.
More Mini MP1584EN DC-DC BUCK 5V Step Down Module
In-Stock
In stock: 63
Infrared IR Sensor Receiver Module for Arduino Robotics Bangladesh Infrared IR Sensor Receiver Module for Arduino Robotics Bangladesh

Reference: RBD-2082

Infrared IR Sensor Receiver Module for Arduino

(0)
Dimension: 2.5 x 1.5 x 1.5 cm. Receiving angle: 90 °. Working voltage: 2.7 ~ 5.5V. Frequency: 37.9KHz Receiving range: 18m. Weight: 4 gm.
BDT 59
BDT 59 tax incl.
BDT 59 tax excl.
BDT 59 tax excl.
BDT 59 tax incl.
BDT 59 tax incl.
BDT 0 Tax
BDT 59 tax excl.
BDT 59 tax excl.
BDT 0 Tax
BDT 59 tax incl.
More Infrared IR Sensor Receiver Module for Arduino
In-Stock
In stock: 33
PIC Development Board with Cable PIC16F877 Robotics Bangladesh PIC Development Board with Cable PIC16F877 Robotics Bangladesh

Reference: RBD-1038

PIC Development Board with Cable PIC16F877

(0)
Reset button.  4M crystal onboard, Using socket, Crystal frequency can be replaced easily at any time  4 independent push buttons, connected to RB0 RB1 RB2 RB3  8 LED's connected to the RD port, J3 is jumpered to enable LED. Remove to disconnect.  Standard RS232 communication interface, microcontroller computer communication interface. 
BDT 2,200
BDT 2,200 tax incl.
BDT 2,200 tax excl.
BDT 2,200 tax excl.
BDT 2,200 tax incl.
BDT 2,200 tax incl.
BDT 0 Tax
BDT 2,200 tax excl.
BDT 2,200 tax excl.
BDT 0 Tax
BDT 2,200 tax incl.
More PIC Development Board with Cable PIC16F877
In-Stock
In stock: 8
GPS GSM GPRS SIM808 Module (Arduino Compatible) Robotics Bangladesh GPS GSM GPRS SIM808 Module (Arduino Compatible) Robotics Bangladesh

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
BDT 3,450
BDT 3,450 tax incl.
BDT 3,450 tax excl.
BDT 3,450 tax excl.
BDT 3,450 tax incl.
BDT 3,450 tax incl.
BDT 0 Tax
BDT 3,450 tax excl.
BDT 3,450 tax excl.
BDT 0 Tax
BDT 3,450 tax incl.
More GPS GSM GPRS SIM808 Module (Arduino Compatible)
In-Stock
In stock: 35
Arduino Opta RS485 Micro PLC (Ethernet and USB-C ports, RS485) Robotics Bangladesh Arduino Opta RS485 Micro PLC (Ethernet and USB-C ports, RS485) Robotics Bangladesh

Reference: RBD-3097

Brand: Arduino Official

Arduino Opta RS485 Micro PLC (Ethernet and USB-C ports, RS485)

(0)
Arduino Opta RS485 – secure micro PLC with industrial IoT support Powered by STM32H747XI dual-core Cortex-M7 + M4 MCU Supports Arduino sketches and IEC 61131-3 PLC languages (LD, FBD, ST, SFC, IL) Built-in Ethernet, USB-C, and RS485 connectivity for versatile integration Onboard secure element with X.509 compliance for reliable data security DIN rail...
BDT 33,450
BDT 33,450 tax incl.
BDT 33,450 tax excl.
BDT 33,450 tax excl.
BDT 33,450 tax incl.
BDT 33,450 tax incl.
BDT 0 Tax
BDT 33,450 tax excl.
BDT 33,450 tax excl.
BDT 0 Tax
BDT 33,450 tax incl.
More Arduino Opta RS485 Micro PLC (Ethernet and USB-C ports, RS485)
In-Stock
In stock: 4
Mini Dry Reed Pipe Module Robotics Bangladesh Mini Dry Reed Pipe Module Robotics Bangladesh

Reference: RBD-2081

Mini Dry Reed Pipe Module

(0)
Operating Voltage: 3.3V to 5v Output Type: Digital
BDT 69
BDT 69 tax incl.
BDT 69 tax excl.
BDT 69 tax excl.
BDT 69 tax incl.
BDT 69 tax incl.
BDT 0 Tax
BDT 69 tax excl.
BDT 69 tax excl.
BDT 0 Tax
BDT 69 tax incl.
More Mini Dry Reed Pipe Module
In-Stock
In stock: 65
You might also like
EM4100 125kHz Printable RFID Card Robotics Bangladesh EM4100 125kHz Printable RFID Card Robotics Bangladesh

Reference: RBD-1099

EM4100 125kHz Printable RFID Card

(0)
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision Printable Package Content: 1x Card
BDT 24
BDT 24 tax incl.
BDT 24 tax excl.
BDT 24 tax excl.
BDT 24 tax incl.
BDT 24 tax incl.
BDT 0 Tax
BDT 24 tax excl.
BDT 24 tax excl.
BDT 0 Tax
BDT 24 tax incl.
More EM4100 125kHz Printable RFID Card
In-Stock
In stock: 720
MIFARE Classic 1K RFID NFC Smart Card 13. MIFARE Classic 1K RFID NFC Smart Card 13.

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

(0)
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
BDT 32
BDT 32 tax incl.
BDT 32 tax excl.
BDT 32 tax excl.
BDT 32 tax incl.
BDT 32 tax incl.
BDT 0 Tax
BDT 32 tax excl.
BDT 32 tax excl.
BDT 0 Tax
BDT 32 tax incl.
More MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable
In-Stock
In stock: 3842
NFC Card Reader USB - 13.56Mhz Robotics Bangladesh NFC Card Reader USB - 13.56Mhz Robotics Bangladesh

Reference: RBD-1817

NFC Card Reader USB - 13.56Mhz

(0)
USB Plug and Play. RFID reader 0-8cm Reading Distance. Win8/7/XP/Android Supported. S50/S70 Card Supported. OTG Phone Connection. Built-in buzzer and LED for identification.
BDT 950
BDT 950 tax incl.
BDT 950 tax excl.
BDT 950 tax excl.
BDT 950 tax incl.
BDT 950 tax incl.
BDT 0 Tax
BDT 950 tax excl.
BDT 950 tax excl.
BDT 0 Tax
BDT 950 tax incl.
More NFC Card Reader USB - 13.56Mhz
In-Stock
In stock: 41

Reference: RBD-0346

PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 419 BDT 590
BDT 590 BDT 419 tax incl.
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax incl.
BDT 590 BDT 419 tax incl.
BDT 0 BDT 0 Tax
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax excl.
BDT 0 BDT 0 Tax
BDT 590 BDT 419 tax incl.
More PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit
In-Stock
In stock: 19
UART EM4100 RFID Card Reader RDM6300 Robotics Bangladesh UART EM4100 RFID Card Reader RDM6300 Robotics Bangladesh

Reference: RBD-0915

UART EM4100 RFID Card Reader RDM6300

(0)
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
BDT 415
BDT 415 tax incl.
BDT 415 tax excl.
BDT 415 tax excl.
BDT 415 tax incl.
BDT 415 tax incl.
BDT 0 Tax
BDT 415 tax excl.
BDT 415 tax excl.
BDT 0 Tax
BDT 415 tax incl.
More UART EM4100 RFID Card Reader RDM6300
Last items in stock
In stock: 2

Follow us on Facebook