This is RFID 13.56MHz Card used for Contactless transmission of data and supplies energy with no battery needed. Its Operating distance is Up to 1 Meter depending on antenna geometry. Operating frequency is 13.56MHz and Data transfer speed is 106 Kbit/s. Featured By RoboticsBD.
Our Observation:
The iPhone 13 Pro Max does not support this card by default. We had to write the URL using a Samsung Galaxy device. After writing the URL to the card, it then worked on the iPhone 13 Pro Max. However, if we write anything other than a URL, such as text or a contact card, the iPhone doesn't detect the tag.
On our Samsung Galaxy device, it worked by default and we could write data onto it.
It can be used as an introductory card. Simply write your profile link using the NFC tool from your smartphone.
Adafruit ST25DV16K I2C RFID EEPROM breakout with 16Kb memory Works as ISO/IEC 15693 (13.56MHz) NFC Type 5 tag, readable by phones/tablets Reprogrammable via I2C – dynamically update tag data with a microcontroller Supports fast transfer mode between I2C and RF interfaces Includes STEMMA QT/Qwiic connectors for solder-free prototyping Long endurance: 1M...
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
This product is an ID card decoding module. After sensing the ID card, it will actively decode and output the 10-digit card number. It also has an output port that can output high and low levels, which can meet the requirements of general ID cards, such as reading, deleting, and registering. Card operation!
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision Printable Package Content: 1x Card
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
Material: ABS Dimension(LxWxH): 43.7×30.5×5.3mm Response Frequency: 13.56MHz Chip type: FM1108 Fudan Chip Memory capacity: 8 kbit Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
The ST25DV16K is a dynamic NFC/RFID EEPROM module that combines I2C and NFC interfaces in a single device. It allows data to be read and written either wirelessly via NFC at 13.56 MHz or through an I2C connection to a microcontroller, making it suitable for IoT configuration, asset tracking, and contactless data exchange.
Frequency: 125Khz. Support μEM4001, 4100, or its compatible RFID, ID card. Read first 10 digits of the RFID/Proximity card. Support Windows95/98/2000/XP/7/8. Plug and Play Powered directly from USB, no need external power supply
High-speed USB NFC reader/writer supporting 13.56 MHz contactless RFID technology Compatible with ISO/IEC 18092 (NFC), MIFARE, and ISO 14443 A/B cards Reads and writes all NFC Tag Types 2–4 (not Type 1 or 5) Offers up to 424 kbps card communication speed and 12 Mbps USB data rate Built-in antenna with up to 5 cm detection range for seamless operation...
The R20DC USB RFID Card Reader is a dual-frequency (125KHz and 13.56MHz) proximity card reader that supports both RFID ID and IC cards. With plug-and-play USB functionality, this reader is recognized as an HID (Human Interface Device), eliminating the need for drivers or extra software. It works like a keyboard, outputting card numbers directly into any...
PN532 NFC/RFID card reader module operates at 13.56 MHz for seamless contactless communication. Based on the PN532 chipset with built-in antenna for easy plug-and-play operation. Supports I²C, SPI, and UART interfaces, compatible with Raspberry Pi, Arduino, and other MCUs. Fully supports ISO14443A/B, FeliCa, and peer-to-peer NFC communication modes....
USB Plug and Play. RFID reader 0-8cm Reading Distance. Win8/7/XP/Android Supported. S50/S70 Card Supported. OTG Phone Connection. Built-in buzzer and LED for identification.
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision Printable Package Content: 1x Card
830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG
Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-female connector design for flexible connections. Colorful for easy identification and organization.
Connect components on breadboards and PCBs easily. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-male connector design for simple use. Colorful for easy identification and organization.
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision Printable Package Content: 1x Card
Frequency: 125Khz. Support μEM4001, 4100, or its compatible RFID, ID card. Read first 10 digits of the RFID/Proximity card. Support Windows95/98/2000/XP/7/8. Plug and Play Powered directly from USB, no need external power supply
USB Plug and Play. RFID reader 0-8cm Reading Distance. Win8/7/XP/Android Supported. S50/S70 Card Supported. OTG Phone Connection. Built-in buzzer and LED for identification.
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
