Banner

LM2596 DC DC Step Down Buck Converter with Digital Tube Display

Reference RBD-1524

Input Voltage(VDC): 4 ~ 40.
Output Voltage(VDC): 1.3 ~ 37.
Output Current: 2A Rated, ( 3A maximum with heat sink).
Switching Frequency: 150 kHz.
Input reverse polarity protection.
Built-in output short protection function.

Description
Product Details

Description

This is LM2596 2A Buck Step-down Power Converter Module DC 4 ~ 40 to 1.3 ~ 37V, it comes with a built-in voltmeter display and uses an advanced microcontroller. RoboticsBD

Together with its high precision multi-turn potentiometer, this means any desired output voltage within its supply range can be set without the need for an external voltage meter. The module also boasts a very high operating range with a DC input supply range of 4 ~ 40V and an adjustable output range of 1.3 ~ 37V. Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Notes: Maximum current is dependent on input and output voltages, ambient temperature and cooling. To achieve maximum ratings an external heatsink may be required. Maximum LM2596 operating temperature must not exceed 125°C otherwise permanent thermal damage can occur. RoboticsBD

Features :

Input reverse polarity protection
Built-in output short protection function
The built-in thermal shutdown function
Press the right key to let the display show the input or output voltage. when the right “OUT” led light, it shows output, the left “IN” led show input.
Power-off memory function, show that road after power voltage values measured for the last time
Press the touch button for 3 seconds to turn off the LED display, touch the button again to turn on the LED display
The band terminals, no iron can also be easy to use, and retention wire connection point

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

General Specification
Input Voltage (V)	4 ~ 40 VDC
Output Voltage (VDC)	1.3 ~ 37
Max. Output Current (A)	2
Switching Frequency(KHz)	150
Operating Temperature (°C)	-40 to 90
Length (mm)	62
Width (mm)	34
Height (mm)	12
Weight (gm)	22
Shipment Weight	0.025 kg
Shipment Dimensions	7 × 4.5 × 2 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Package Includes :

1 x LM2596 DC DC Step Down Buck Converter with Digital Tube Display.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Product Details

Reference RBD-1524

In stock 183 Items

Specific References

EAN13: 1524

Comments (0)

Grade

No customer reviews for the moment.

16 other products in the same category:

Reference: RBD-2000

10uH 0.5W Color Ring Inductor

(0)

10uH (0.01mH) 1/2W Axial Lead Epoxy Coated Color Band Identifier Fixed Inductor

BDT 10

BDT 10 tax incl.

BDT 10 tax excl.

BDT 10 tax incl.

BDT 0 Tax

BDT 10 tax excl.

BDT 0 Tax

BDT 10 tax incl.

In-stock

In stock: 123

Reference: RBD-1486

Zener Diode 5.6V (Pack of 5)

(0)

1N4734A ZENER VOLTAGE RANGE 5.6V

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 287

Reference: RBD-1507

REED SWITCH

(0)

Max. Switching Voltage: 300 VDC Min. Breakdown Voltage: 150 VDC Max. Contact Rating: 10W Max. Switching Current: 0.55 A Max. Operate time: 0.45 ms Bounce time: 0.25 ms Max. Release time: 0.35 ms Resonant Frequency: 5000 HZ Max. Operating Frequency: 400 HZ Max. Contact Capacitance: 0.5 pF

BDT 20

BDT 20 tax incl.

BDT 20 tax excl.

BDT 20 tax incl.

BDT 0 Tax

BDT 20 tax excl.

BDT 0 Tax

BDT 20 tax incl.

In-Stock

In stock: 92

Sold-out

Reference: RBD-1326

WS2812 16-bit 5050 Full Color RGB LED Module

(0)

Outer Diameter: 68 mm. Supply Voltage: DC 4-7V. LED driver chip: WS2812B Communication interface: single wire communication. Send data at speeds of 800Kbps. The color of the light was highly consistent Full-color module, Full-color soft lights a lamp strip

BDT 250

BDT 250 tax incl.

BDT 250 tax excl.

BDT 250 tax incl.

BDT 0 Tax

BDT 250 tax excl.

BDT 0 Tax

BDT 250 tax incl.

Sold-out

In stock: 0

Reference: RBD-2475

Mechanical Decade Counters Small Size 5 Counter

(0)

Compact mechanical decade counters bundled in a set of 5 with end caps Each counter features two buttons – up and down counting Counts from 0–9 and resets back to 0 automatically Snap-together design allows flexible configurations Includes PCB with 11 contacts for easy interfacing (1 common + 10 outputs) Ideal for DIY electronics, robotics, test...

BDT 580

BDT 580 tax incl.

BDT 580 tax excl.

BDT 580 tax incl.

BDT 0 Tax

BDT 580 tax excl.

BDT 0 Tax

BDT 580 tax incl.

In-Stock

In stock: 27

Sold-out

Reference: RBD-0388

TP4056 5V Mini USB Charger Module

(0)

Input voltage : 4.5V ~ 5.5V. Input Interface: Micro USB port. Charging method: linear charge. A full charge voltage: 4.2V. RoboticsBD Power: 4.2 w. Charging accuracy: 1.5%. Operating Temperature: -10 to +85ºC Charging indicator: Blue LED charging, Red LED fullCheck out New Product TP4056 Lithium Battery Charger Module With Protection Dual Functions

BDT 30

BDT 30 tax incl.

BDT 30 tax excl.

BDT 30 tax incl.

BDT 0 Tax

BDT 30 tax excl.

BDT 0 Tax

BDT 30 tax incl.

Sold-out

In stock: 0

Reference: RBD-1815

PC817 4 Channel Optocoupler Isolation Board

(0)

I/O Isolation for MCUs (Micro Controller Units) Noise Suppression in Switching Circuits Driving Port Signal Voltage: 3.6-24V Output Port Voltage Port: 3.6-30V Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.

BDT 270

BDT 270 tax incl.

BDT 270 tax excl.

BDT 270 tax incl.

BDT 0 Tax

BDT 270 tax excl.

BDT 0 Tax

BDT 270 tax incl.

In-Stock

In stock: 18

Reference: RBD-0765

AA Battery Holder 4S

(0)

Holds 4 AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 62 x 58 x 15 Weight: 15 gm Material: Plastic Internal Connection: Series

BDT 65

BDT 65 tax incl.

BDT 65 tax excl.

BDT 65 tax incl.

BDT 0 Tax

BDT 65 tax excl.

BDT 0 Tax

BDT 65 tax incl.

In-Stock

In stock: 102

Reference: RBD-0756

IR receiver Diode

(0)

Very low supply current Photo-detector and preamplifier in one package Internal filter for PCM frequency Improved shielding against EMI Supply voltage: 2.5 V to 5.5 V Improved immunity against ambient light

BDT 15

BDT 15 tax incl.

BDT 15 tax excl.

BDT 15 tax incl.

BDT 0 Tax

BDT 15 tax excl.

BDT 0 Tax

BDT 15 tax incl.

In-Stock

In stock: 39

Reference: RBD-0758

BC547 NPN Transistor

(0)

BC547 NPN DIP Transistor

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 1089

Reference: RBD-2672

MCP3008 - Analogue to Digital Converter

(0)

8-channel 10-bit Analog to Digital Converter (ADC) IC Compatible with Raspberry Pi and other microcontrollers via SPI Converts analog sensor signals to digital data with high accuracy Breadboard-friendly DIP package for easy prototyping Ideal for sensors like LM35, LDR, potentiometer, and thermistors Requires only 4 pins for communication, with Python...

BDT 566

BDT 566 tax incl.

BDT 566 tax excl.

BDT 566 tax incl.

BDT 0 Tax

BDT 566 tax excl.

BDT 0 Tax

BDT 566 tax incl.

In-Stock

In stock: 9

Reference: RBD-2796

W101 Through Hole Trimmer Potentiometer Variable Trim Pot Resistor 100 Ohms

(0)

Resistance: 100 Ohm Tolerance: 10 % Temperature coefficient: ±100 ppm/ºC Operating temperature range: -55ºC to +125ºC Mounting type: Through-hole

BDT 20

BDT 20 tax incl.

BDT 20 tax excl.

BDT 20 tax incl.

BDT 0 Tax

BDT 20 tax excl.

BDT 0 Tax

BDT 20 tax incl.

In-Stock

In stock: 138

Reference: RBD-3928

High voltage KCD4 Red 12V-24V 16A DPST ON-OFF 4 Pin Rocker Switch

(0)

Model: KCD4 Switch Type: Rocker switch Material: Plastic and Metal Color: Red Voltage: 12V-24V

BDT 70

BDT 70 tax incl.

BDT 70 tax excl.

BDT 70 tax incl.

BDT 0 Tax

BDT 70 tax excl.

BDT 0 Tax

BDT 70 tax incl.

In stock

In stock: 697

Reference: RBD-2236

20mm Piezo Ceramic Elements Sound Sensor

(0)

Plate Diameter: 20mm Element Diameter: 14mm Plate Thickness: .42mm Lead Length: ~50mm Plate Material: Brass Resonant Frequency (kHz): 6.3 +/- .6kHz

BDT 50

BDT 50 tax incl.

BDT 50 tax excl.

BDT 50 tax incl.

BDT 0 Tax

BDT 50 tax excl.

BDT 0 Tax

BDT 50 tax incl.

In-Stock

In stock: 151

Reference: RBD-2032

6 MHz Crystal Oscillator

(0)

Frequency: 6 MHz Tolerance: 30% Operating Temperature Range: -10°C to +60°C Storage Temperature Range: -20°C to +70°C

BDT 15

BDT 15 tax incl.

BDT 15 tax excl.

BDT 15 tax incl.

BDT 0 Tax

BDT 15 tax excl.

BDT 0 Tax

BDT 15 tax incl.

In-Stock

In stock: 9

Reference: RBD-0759

BC557 PNP Transistor

(0)

BC557 PNP DIP Transistor

BDT 4

BDT 4 tax incl.

BDT 4 tax excl.

BDT 4 tax incl.

BDT 0 Tax

BDT 4 tax excl.

BDT 0 Tax

BDT 4 tax incl.

In-Stock

In stock: 392

Frequently purchased together
Products from the same category

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)

Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes

BDT 185

BDT 185 tax incl.

BDT 185 tax excl.

BDT 185 tax incl.

BDT 0 Tax

BDT 185 tax excl.

BDT 0 Tax

BDT 185 tax incl.

In Stock

In stock: 580

Reference: RBD-2640

Male to Female Jumper Wires 20 Pcs 20cm

(0)

Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-female connector design for flexible connections. Colorful for easy identification and organization.

BDT 55

BDT 55 tax incl.

BDT 55 tax excl.

BDT 55 tax incl.

BDT 0 Tax

BDT 55 tax excl.

BDT 0 Tax

BDT 55 tax incl.

In-Stock

In stock: 158

Reference: RBD-2639

Male to Male Jumper Wires 20 Pcs 20cm

(0)

Connect components on breadboards and PCBs easily. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-male connector design for simple use. Colorful for easy identification and organization.

BDT 55

BDT 55 tax incl.

BDT 55 tax excl.

BDT 55 tax incl.

BDT 0 Tax

BDT 55 tax excl.

BDT 0 Tax

BDT 55 tax incl.

Last items in stock

In stock: 2

- BDT 14 Reduced price

Reference: RBD-0133

Breadboard Full Size Bare 830 Tie Points

(0)

830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG

BDT 145 BDT 159

BDT 159 BDT 145 tax incl.

BDT 159 BDT 145 tax excl.

BDT 159 BDT 145 tax incl.

BDT 0 BDT 0 Tax

BDT 159 BDT 145 tax excl.

BDT 0 BDT 0 Tax

BDT 159 BDT 145 tax incl.

In-Stock

In stock: 163

Reference: RBD-2641

Female to Female Jumper Wires 20 Pcs 20cm

(0)

Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Female-to-female connector design for flexible connections. Colorful for easy identification and organization.

BDT 55

BDT 55 tax incl.

BDT 55 tax excl.

BDT 55 tax incl.

BDT 0 Tax

BDT 55 tax excl.

BDT 0 Tax

BDT 55 tax incl.

In-Stock

In stock: 23

Reference: RBD-1714

Rocker Switch KCD11 On / Off Switch (Mini) Red

(0)

KCD1-11 3A 250V AC 6A 125V AC Normal Quality Rocker Switch Button 2Pin ON/OFF KCD Switch Dimension: 13.5mm X 8.5 mm

BDT 6

BDT 6 tax incl.

BDT 6 tax excl.

BDT 6 tax incl.

BDT 0 Tax

BDT 6 tax excl.

BDT 0 Tax

BDT 6 tax incl.

In-Stock

In stock: 374

Reference: RBD-0022

Ultrasonic Sonar Sensor HC-SR04

(0)

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...

BDT 110

BDT 110 tax incl.

BDT 110 tax excl.

BDT 110 tax incl.

BDT 0 Tax

BDT 110 tax excl.

BDT 0 Tax

BDT 110 tax incl.

In-Stock

In stock: 394

Breadboard (Medium Size) Robotics Bangladesh

Reference: RBD-0120

Breadboard Half Size Bare 400 Tie Points

(0)

400 tie points 2 Power lanes, Total 100 tie points in power lanes 1 Double strip, Total 300 tie points Perfect for Arduino shield prototyping and testing Plastic housing, metal contact clips

BDT 88

BDT 88 tax incl.

BDT 88 tax excl.

BDT 88 tax incl.

BDT 0 Tax

BDT 88 tax excl.

BDT 0 Tax

BDT 88 tax incl.

In-Stock

In stock: 248

DC-DC Boost Module XL6009

(0)

The performance is much higher than LM2577. Non-isolated Boost converter. It has a non-synchronous rectifier. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v;

BDT 83

BDT 83 tax incl.

BDT 83 tax excl.

BDT 83 tax incl.

BDT 0 Tax

BDT 83 tax excl.

BDT 0 Tax

BDT 83 tax incl.

In-Stock

In stock: 169

Reference: RBD-1754

DC-DC Step Up Boost Converter Module MT3608

(0)

It’s efficient up to 93% It can source a good amount of current The maximum output current: 2A Input voltage: 2V-24V DC The maximum output voltage: 5V-28V DC

BDT 89

BDT 89 tax incl.

BDT 89 tax excl.

BDT 89 tax incl.

BDT 0 Tax

BDT 89 tax excl.

BDT 0 Tax

BDT 89 tax incl.

In-Stock

In stock: 41

Reference: RBD-1855

HW-411A LM2596 DC To Dc Buck Converter Step Down Module Power Supply

(0)

Input voltage: 3-40V Output voltage: 1.5-35V(Adjustable) Output current: Rated current is 2A, maximum 3A Switching Frequency: 150KHz Operating temperature:Industrial grade (-40 to +85 ) Conversion efficiency: 92%(highest)

BDT 99

BDT 99 tax incl.

BDT 99 tax excl.

BDT 99 tax incl.

BDT 0 Tax

BDT 99 tax excl.

BDT 0 Tax

BDT 99 tax incl.

In-Stock

In stock: 475

Reference: RBD-0406

HW-411A LM2596 DC-DC Step Down Adjustable Power Supply Module 3A Max Buck Converter

(0)

Input voltage: 4.5-35V, Output voltage: (3-35V) continuously adjustable (recommended load debugging). Minimum pressure: 1.5V Output current: rated current 2A, 3A maximum Output Power: 15W maximum. RoboticsBD

BDT 75

BDT 75 tax incl.

BDT 75 tax excl.

BDT 75 tax incl.

BDT 0 Tax

BDT 75 tax excl.

BDT 0 Tax

BDT 75 tax incl.

In-Stock

In stock: 124

Reference: RBD-1524