Home

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 70,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 4,000 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Arduino Boards
  • Categories: Arduino Shield & Module
  • Categories: Components
  • Categories: Programmer
  • Categories: Robotics Parts
Arduino Nano R3 Robotics Bangladesh Quick view

Reference: RBD-0926

Arduino Nano R3

(0)
USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 32
65mm Rubber Wheel with 25GA Motor Mounting Bracket Quick view

Reference: RBD-0716

65mm Rubber Wheel with 25GA Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 5
Jumper Wire housing 3 Pin Robotics Bangladesh Quick view

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
LED - SMD RGB HL5011 Quick view

Reference: RBD-0121

LED - SMD RGB HL5011 (Pack of 5)

(0)
BDT 10.00
BDT 10.00 tax incl.
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 10.00 tax incl.
BDT 10.00 tax incl.
BDT 0.00 Tax
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 0.00 Tax
BDT 10.00 tax incl.
More
In-Stock
In stock: 1442
NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz Robotics Bangladesh Quick view

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17
PICKIT 3.5 Compatible Programmer / DebuggerPICKIT 3.5 Compatible Programmer / Debugger Robotics Bangladesh Quick view

Reference: RBD-1139

PICKIT 3.5 Compatible Programmer / DebuggerPICKIT 3.5 Compatible Programmer / Debugger

(0)
Type: Debugger/Programmer Tool/Board Application: Debugging/Programming MCU Supported Families: Flash-based PIC MCUs Core Architecture: PIC, dsPIC
BDT 4,920.00
BDT 4,920.00 tax incl.
BDT 4,920.00 tax excl.
BDT 4,920.00 tax excl.
BDT 4,920.00 tax incl.
BDT 4,920.00 tax incl.
BDT 0.00 Tax
BDT 4,920.00 tax excl.
BDT 4,920.00 tax excl.
BDT 0.00 Tax
BDT 4,920.00 tax incl.
More
In-Stock
In stock: 4
Robotics Claw Mechanical Gripper Clamp Kit Quick view

Reference: RBD-0578

Robotics Claw Mechanical Gripper Clamp Kit

(0)
The degree of Freedom (DOF): 2 Paw material: aluminum alloy. RoboticsBD Paw weight: about 68g (without motor) Claws overall length: 108mm (overall maximum length when closed paw) Claws overall width: 98mm (maximum overall width of the paw when open) Paw maximum opening angle: 55mm
BDT 780.00
BDT 780.00 tax incl.
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 780.00 tax incl.
BDT 780.00 tax incl.
BDT 0.00 Tax
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 0.00 Tax
BDT 780.00 tax incl.
More
In-Stock
In stock: 21
Jumper Wire housing 5 Pin Robotics Bangladesh Quick view

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
Out-of-Stock ST-LINK V2 Mini- STM Programmers & Debuggers Robotics Bangladesh Quick view

Reference: RBD-1700

Brand: Waveshare

ST-LINK V2 Mini- STM Programmers & Debuggers

(0)
Mini ST-LINK/V2  Small single board Extreme low cost solution  In-circuit debugger/programmer  STM8 STM32.
BDT 900.00
BDT 900.00 tax incl.
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 900.00 tax incl.
BDT 900.00 tax incl.
BDT 0.00 Tax
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 0.00 Tax
BDT 900.00 tax incl.
More
Out-of-Stock
In stock: -2
Arduino NANO I/O Extension Shield Quick view

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37
Jumper Wire housing 6 Pin Robotics Bangladesh Quick view

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5
On sale! 2WD Wheel Drive Mobile Robot Platform Chassis Robotics Bangladesh Quick view

Reference: RBD-0259

2WD Wheel Drive Mobile Robot Platform Chassis

(0)
Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY. This car is the tachometer encoder. With a 4 AA battery box (batteries not included). It can be used for distance measurement, velocity. Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, Wireless remote control....
BDT 589.00
BDT 589.00 tax incl.
BDT 589.00 tax excl.
BDT 589.00 tax excl.
BDT 589.00 tax incl.
BDT 589.00 tax incl.
BDT 0.00 Tax
BDT 589.00 tax excl.
BDT 589.00 tax excl.
BDT 0.00 Tax
BDT 589.00 tax incl.
More
In-Stock
In stock: 41
Arduino Micro R3 Robotics Bangladesh Quick view

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24
6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit Robotics Bangladesh Quick view

Reference: RBD-0669

6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit

(0)
Without Servo Motor & Servo Horn Material: Metal Color: black, as picture shows Function: clamping object
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 16
PN532 NFC RFID Read / Write Module V3 Kit Robotics Bangladesh Quick view

Reference: RBD-0346

PN532 NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 820.00
BDT 820.00 tax incl.
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 820.00 tax incl.
BDT 820.00 tax incl.
BDT 0.00 Tax
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 0.00 Tax
BDT 820.00 tax incl.
More
In-Stock
In stock: 15
Jumper Wire housing 7 Pin Robotics Bangladesh Quick view

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5
- BDT 15.00 Reduced price 35mm Piezo Ceramic Elements Sound Sensor Robotics Bangladesh Quick view

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387
CH340C WIFI Module Adapter Download Debug for ESP8266 ESP-01/01S Robotics Bangladesh Quick view

Reference: RBD-2142

CH340C WIFI Module Adapter Download Debug for ESP8266 ESP-01/01S

(0)
Operating Voltage: 5VDC USB to Serial Converter: CH340C Compatible With:ESP8266 ESP-01/01S Comes With Onboard Reset Switch Has Female Headers for Connecting the Wifi Module.
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 11
85mm Antiskid Shockproof Wheels High Quality Robotics Bangladesh Quick view

Reference: RBD-0749

85mm Antiskid Shockproof Wheels High Quality

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 137
Heart Rate Pulse Sensor Pulsesensor Sensor Module For Arduino Quick view

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 309.00
BDT 309.00 tax incl.
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 309.00 tax incl.
BDT 309.00 tax incl.
BDT 0.00 Tax
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 0.00 Tax
BDT 309.00 tax incl.
More
In-Stock
In stock: 100
Jumper Wire housing 8 Pin Robotics Bangladesh Quick view

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25
65mm Rubber Wheel with 37GB Motor Mounting Bracket Quick view

Reference: RBD-0717

65mm Rubber Wheel with 37GB Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire. RoboticsBD
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In-Stock
In stock: 19
0.96" Inch I2C OLED Display Yellow Robotics Bangladesh Quick view

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22
LM35 Quick view

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75
Jumper Wire housing 4Pin Robotics Bangladesh Quick view

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17
Arduino Pro Micro 5V/16MHz Quick view

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41
Line Follower Sensor- 8 Array Robotics bangladesh Quick view

Reference: RBD-0430

Line Follower Sensor- 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Output format: 8 Analog and Digital voltages. Optimal sensing distance: 0.125″ (3 mm). RoboticsBD
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 31
MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino Quick view

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10
470 Ohm 1/4w - Pack of 5 Quick view

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)
Choose your desire Resistor value from below: 
BDT 5.00
BDT 5.00 tax incl.
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 5.00 tax incl.
BDT 5.00 tax incl.
BDT 0.00 Tax
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 0.00 Tax
BDT 5.00 tax incl.
More
In-Stock
In stock: 614
Back to top

Follow us on Facebook

Facebook