Home

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 0.00 - BDT 230,000.00

Categories

Categories

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Internet of things (IoT)
  • Categories: Orange Pi
  • Categories: PLC
  • Categories: Sensors
6DOF Accelerometer Gyroscope GY-521 MPU-6050 Robotics Bangladesh Quick view

Reference: RBD-0104

6DOF Accelerometer Gyroscope GY-521 MPU-6050

(0)
Chip built-in 16bit AD converter, 16-bit data output Driver Chip: MPU6050 Operating Voltage: 3-5V DC Communication: I2C/IIC Protocol Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
BDT 208.00
BDT 208.00 tax incl.
BDT 208.00 tax excl.
BDT 208.00 tax excl.
BDT 208.00 tax incl.
BDT 208.00 tax incl.
BDT 0.00 Tax
BDT 208.00 tax excl.
BDT 208.00 tax excl.
BDT 0.00 Tax
BDT 208.00 tax incl.
More
In-Stock
In stock: 392
Out-of-Stock Anycubic Photon Zero Resin 3D Printer Robotics Bangladesh Quick view

Reference: 1375

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

(0)
Technique: LCD-based SLA Printing Speed: 30mm(H)/hour Power: 30W
BDT 36,990.00
BDT 36,990.00 tax incl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax incl.
BDT 36,990.00 tax incl.
BDT 0.00 Tax
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 0.00 Tax
BDT 36,990.00 tax incl.
More
Out-of-Stock
In stock: 0
Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

(0)
The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
BDT 1,590.00
BDT 1,590.00 tax incl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax incl.
BDT 1,590.00 tax incl.
BDT 0.00 Tax
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 0.00 Tax
BDT 1,590.00 tax incl.
More
In-Stock
In stock: 15
SIM800L Mini GPRS GSM Module Robotics Bangladesh Quick view

Reference: RBD-1039

SIM800L Mini GPRS GSM Module

(0)
The module was recycled from a mobile phone so you can say it is used. TTL serial port for serial port, you can link directly to the micro-controller. Don’t need MAX232. Power module automatically boots, homing network. Onboard signal lights all the way. It flashes slowly when there is a signal, it flashes quickly when there is no signal. In recent years...
BDT 399.00
BDT 399.00 tax incl.
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 399.00 tax incl.
BDT 399.00 tax incl.
BDT 0.00 Tax
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 0.00 Tax
BDT 399.00 tax incl.
More
In-Stock
In stock: 245
S7-200 CPU 222 6ES7 212--1AB23--0XB0 Quick view

Reference: RBD-0450

S7-200 CPU 224 6ES7214-1BD23-0XB0

(0)
BDT 30,000.00
BDT 30,000.00 tax incl.
BDT 30,000.00 tax excl.
BDT 30,000.00 tax excl.
BDT 30,000.00 tax incl.
BDT 30,000.00 tax incl.
BDT 0.00 Tax
BDT 30,000.00 tax excl.
BDT 30,000.00 tax excl.
BDT 0.00 Tax
BDT 30,000.00 tax incl.
More
Last items in stock
In stock: 1
Sound Sensor Module for Arduino Quick view

Reference: RBD-0291

Sound Sensor Module for Arduino

(0)
Main chip: LM393, Electret condenser microphone Working voltage: DC 3.3-5V Induction distance is 0.5M Signal output Indication Single channel signal output The output effective signal is low level.
BDT 75.00
BDT 75.00 tax incl.
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 75.00 tax incl.
BDT 75.00 tax incl.
BDT 0.00 Tax
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 0.00 Tax
BDT 75.00 tax incl.
More
In-Stock
In stock: 200
Out-of-Stock SparkFun Micro OLED Breakout Quick view

Reference: RBD-0258

Brand: SparkFun Electronics

SparkFun Micro OLED Breakout

(0)
SparkFun Micro OLED Breakout
BDT 1,800.00
BDT 1,800.00 tax incl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax incl.
BDT 1,800.00 tax incl.
BDT 0.00 Tax
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 0.00 Tax
BDT 1,800.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: 1316

ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.
BDT 2,895.00
BDT 2,895.00 tax incl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax incl.
BDT 2,895.00 tax incl.
BDT 0.00 Tax
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 0.00 Tax
BDT 2,895.00 tax incl.
More
Out-of-Stock
In stock: 0
Black
SIM808 GPRS/GSM+GPS Shield Robotics Bangladesh Quick view

Reference: RBD-1037

SIM808 GPRS/GSM+GPS Shield

(0)
Quad-band 850/900/1800/1900MHz Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port. Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone. Sending and receiving SMS.
BDT 3,950.00
BDT 3,950.00 tax incl.
BDT 3,950.00 tax excl.
BDT 3,950.00 tax excl.
BDT 3,950.00 tax incl.
BDT 3,950.00 tax incl.
BDT 0.00 Tax
BDT 3,950.00 tax excl.
BDT 3,950.00 tax excl.
BDT 0.00 Tax
BDT 3,950.00 tax incl.
More
In-Stock
In stock: 39
S7-200 CPU 222 6ES7 212-1BB23-0XB0 Quick view

Reference: RBD-0451

S7-200 CPU 222 6ES7 212-1BB23-0XB0

(0)
CPU 222 AC/DC/Relay 8 Inputs/6 Relays
BDT 25,000.00
BDT 25,000.00 tax incl.
BDT 25,000.00 tax excl.
BDT 25,000.00 tax excl.
BDT 25,000.00 tax incl.
BDT 25,000.00 tax incl.
BDT 0.00 Tax
BDT 25,000.00 tax excl.
BDT 25,000.00 tax excl.
BDT 0.00 Tax
BDT 25,000.00 tax incl.
More
In stock
In stock: 5
20x4 Character LCD Quick view

Reference: RBD-0161

20x4 Character LCD

(0)
Model: LCD2004 Character Color: White Backlight: Blue Supply voltage: 5V Dimensions(L x W x H) mm: 98 x 60 x 12
BDT 343.00
BDT 343.00 tax incl.
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 343.00 tax incl.
BDT 343.00 tax incl.
BDT 0.00 Tax
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 0.00 Tax
BDT 343.00 tax incl.
More
In-Stock
In stock: 16
TCRT5000L Reflective Optical Sensor Quick view

Reference: RBD-0132

TCRT5000L Reflective Optical Sensor

(0)
The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version. Model TCRT5000 Color Black + blue Detecting range: 0.591″ (15mm); Detecting method: Reflective; Collector-Emitter: Voltage:...
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
In-Stock
In stock: 443
Arduino Nano Quick view

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549
PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: RBD-1315

PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650.00
BDT 2,650.00 tax incl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax incl.
BDT 2,650.00 tax incl.
BDT 0.00 Tax
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 0.00 Tax
BDT 2,650.00 tax incl.
More
In-Stock
In stock: 13
Yellow Red Black Blue Gray White
Arduino Nano R3 Robotics Bangladesh Quick view

Reference: RBD-0926

Arduino Nano R3

(0)
USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 32
S7-200 CPU 224 6ES7214-1AD23-0XB0 Quick view

Reference: RBD-0452

S7-200 CPU 224 6ES7214-1AD23-0XB0

(0)
SIMATIC S7-200, CPU 224, COMPACT UNIT, DC POWER SUPPLY 14 DI DC/10 DO DC, 8/12 KB CODE/8 KB DATA, PROFIBUS DP EXTENDABLE
BDT 48,000.00
BDT 48,000.00 tax incl.
BDT 48,000.00 tax excl.
BDT 48,000.00 tax excl.
BDT 48,000.00 tax incl.
BDT 48,000.00 tax incl.
BDT 0.00 Tax
BDT 48,000.00 tax excl.
BDT 48,000.00 tax excl.
BDT 0.00 Tax
BDT 48,000.00 tax incl.
More
In stock
In stock: 5
I2C LCD Adapter Module Quick view

Reference: RBD-0433

I2C LCD Adapter Module

(0)
5V power supply. Serial I2C control of LCD display using PCF8574. RoboticsBD Backlight can be enabled or disabled via a jumper on the board. Contrast control via a potentiometer. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In Stock
In stock: 649
SIM900A Mini Module 5V Robotics Bangladesh Quick view

Reference: RBD-0318

SIM900A Mini Module 5V

(0)
This module is intended for advanced users who require moderate knowledge of GSM systems and microcontrollers. It needs wiring and firmware updates to unlock the country lock.  Dual-Band 900/ 1800 MHz GPRS multi-slot class 10/8GPRS mobile station class B Compliant to GSM phase 2/2+ Dimensions: 24*24*3 mm Weight: 3.4g Control via AT commands (GSM 07.07...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 9
YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor Robotics Bangladesh Quick view

Reference: RBD-0145

YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor

(0)
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 280
NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz Robotics Bangladesh Quick view

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17
Out-of-Stock Flexible TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,540.00
BDT 3,540.00 tax incl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax incl.
BDT 3,540.00 tax incl.
BDT 0.00 Tax
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 0.00 Tax
BDT 3,540.00 tax incl.
More
Out-of-Stock
In stock: -10
Red White
S7-200 CPU 224 6ES7 214-1BD23-0XB0 Quick view

Reference: RBD-0453

S7-200 CPU 224 6ES7 214-1BD23-0XB0

(0)
CPU 224 AC/DC/Relay 14 Inputs/10 Relays
BDT 48,000.00
BDT 48,000.00 tax incl.
BDT 48,000.00 tax excl.
BDT 48,000.00 tax excl.
BDT 48,000.00 tax incl.
BDT 48,000.00 tax incl.
BDT 0.00 Tax
BDT 48,000.00 tax excl.
BDT 48,000.00 tax excl.
BDT 0.00 Tax
BDT 48,000.00 tax incl.
More
In-Stock
In stock: 5
On sale! ESP8266 ESP-01 WIFI Wireless Transceiver Send Receive LWIP AP+STA M70 Robotics Bangladesh Quick view

Reference: RBD-0345

ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

(0)
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
In-Stock
In stock: 388
MLX90614 Contactless Temperature Sensor Module For Arduino Quick view

Reference: RBD-0307

MLX90614 Contactless Temperature Sensor Module For Arduino

(0)
Operating Voltage(V): 3- 5 Operating Current(mA): 2 Communication protocol: I2C Power saving mode Automotive grad Small size, low cost. RoboticsBD
BDT 1,090.00
BDT 1,090.00 tax incl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax incl.
BDT 1,090.00 tax incl.
BDT 0.00 Tax
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 0.00 Tax
BDT 1,090.00 tax incl.
More
In-Stock
In stock: 21
3.5 inch RPi Display Robotics Bangladesh Quick view

Reference: RBD-0305

3.5 inch RPi Display

(0)
LCD Type: TFT LCD Interface: SPI Touch Screen Type: Resistive Touch Screen Controller: XPT2046 Colors: 65536 Backlight: LED Resolution: 480*320 (Pixel) Dimensions: 84.91×56.54 (MM) Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 4
Out-of-Stock PETG Filament Plastic For 3D Printer 1. Quick view

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640.00
BDT 3,640.00 tax incl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax incl.
BDT 3,640.00 tax incl.
BDT 0.00 Tax
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 0.00 Tax
BDT 3,640.00 tax incl.
More
Out-of-Stock
In stock: 0
Red Black Blue White
Arduino NANO I/O Extension Shield Quick view

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37
S7-200 CPU226 6ES7216-2AD23-0XB0 Quick view

Reference: RBD-0454

S7-200 CPU226 6ES7216-2AD23-0XB0

(0)
SIMATIC S7-200, CPU 226 COMPACT UNIT, DC POWER SUPPLY 24 DI DC/16 DO DC, 16/24 KB CODE/10 KB DATA, 2 PPI/FREEPORT PORTS Part No: 6ES7 216-2AD23-0XB0 Mode: S7-200 CPU226
BDT 70,000.00
BDT 70,000.00 tax incl.
BDT 70,000.00 tax excl.
BDT 70,000.00 tax excl.
BDT 70,000.00 tax incl.
BDT 70,000.00 tax incl.
BDT 0.00 Tax
BDT 70,000.00 tax excl.
BDT 70,000.00 tax excl.
BDT 0.00 Tax
BDT 70,000.00 tax incl.
More
In-Stock
In stock: 5
0.96" Inch I2C OLED Display Yellow Robotics Bangladesh Quick view

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22
HR202 Humidity Detection Sensor Module Robotics Bangladesh Quick view

Reference: RBD-0147

HR202 Humidity Detection Sensor Module

(0)
Adjustable Sensitivity, External GND. Detect Ambient Humidity. Provided with Fixed Bolt Hole, Convenient to Install. Power Indicator Light & Digital Output Indication Lamp. Using LM393 Chip for Stable Work. DO Small Digital Outputs Interface (0 & 1).
BDT 299.00
BDT 299.00 tax incl.
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 299.00 tax incl.
BDT 299.00 tax incl.
BDT 0.00 Tax
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 0.00 Tax
BDT 299.00 tax incl.
More
In-Stock
In stock: 99
Arduino Micro R3 Robotics Bangladesh Quick view

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24
Out-of-Stock TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9
Black White
Back to top

Follow us on Facebook

Facebook