Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 5.00 - BDT 1,600,000.00

Categories

Categories

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Back in Stock
  • Categories: Display
  • Categories: HMI
  • Categories: Instruments
  • Categories: Robot Platform Chassis
  • Categories: Robots

Reference: RBD-0234

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

(0)
Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2488

W5100 Ethernet Network Module for Arduino

(0)
Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet 10BaseT/100BaseTX Ethernet PHY embedded Auto-Negotiation (Full-duplex and half duplex) Support Auto MDI/MDIX Simultaneously Supports to 4 independent sockets 0.18 µm CMOS technology 3.3V operation with 5V I/O signal tolerance Provide Serial Peripheral Interface (SPI MODE...
BDT 910.00
BDT 910.00 tax incl.
BDT 910.00 tax excl.
BDT 910.00 tax excl.
BDT 910.00 tax incl.
BDT 910.00 tax incl.
BDT 0.00 Tax
BDT 910.00 tax excl.
BDT 910.00 tax excl.
BDT 0.00 Tax
BDT 910.00 tax incl.
More
In stock
In stock: 40

Reference: RBD-2251

BALA-C PLUS ESP32 Self-Balancing Robot Kit

(0)
ESP32-Pico-D4: 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Servo Rotation angle: 360 °; no-load speed: 0.12 seconds / 60 degrees (4.8V) Driver: L9110S Slave: STM32F030F4P6 Communication protocol I2C: 0x38
BDT 8,350.00 BDT 9,850.00
BDT 9,850.00 BDT 8,350.00 tax incl.
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 9,850.00 BDT 8,350.00 tax incl.
BDT 9,850.00 BDT 8,350.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 9,850.00 BDT 8,350.00 tax incl.
More
In-Stock
In stock: 5

Reference: 1375

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

(0)
Technique: LCD-based SLA Printing Speed: 30mm(H)/hour Power: 30W
BDT 36,990.00
BDT 36,990.00 tax incl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax incl.
BDT 36,990.00 tax incl.
BDT 0.00 Tax
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 0.00 Tax
BDT 36,990.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0820

Off-Road Wheels - 130x60mm (Single)

(0)
"Take on any terrain with our burly off-road wheels." "Get the grip and stability you need with our deep-treaded tires." "Easy-to-mount and built to last - our off-road wheels won't let you down."
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0280

Mini Breadboard

(0)
Tie-points: 170 (10×17) Size: 48 x 35 x 10 mm(LxWxH). Use: experimental, testing, robot Matching jumper, diameter 0.8mm Phosphor bronze nickel plated spring clips Accepts a variety of wire sizes (29-20 the AWG) **1 pcs Random Color
BDT 45.00
BDT 45.00 tax incl.
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 45.00 tax incl.
BDT 45.00 tax incl.
BDT 0.00 Tax
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 0.00 Tax
BDT 45.00 tax incl.
More
In-Stock
In stock: 633

Reference: RBD-0258

Brand: SparkFun Electronics

SparkFun Micro OLED Breakout

(0)
SparkFun Micro OLED Breakout
BDT 1,800.00
BDT 1,800.00 tax incl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax incl.
BDT 1,800.00 tax incl.
BDT 0.00 Tax
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 0.00 Tax
BDT 1,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: 1316

ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.
BDT 2,895.00
BDT 2,895.00 tax incl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax incl.
BDT 2,895.00 tax incl.
BDT 0.00 Tax
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 0.00 Tax
BDT 2,895.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1254

XiaoR STM32 Self Balancing Programmable Robot

(0)
Size: 202X85X200mm Weight: 1150 gram MCU: STM32F105 Motor Drive: LV8731 motor driver chip Charging Direct
BDT 19,990.00
BDT 19,990.00 tax incl.
BDT 19,990.00 tax excl.
BDT 19,990.00 tax excl.
BDT 19,990.00 tax incl.
BDT 19,990.00 tax incl.
BDT 0.00 Tax
BDT 19,990.00 tax excl.
BDT 19,990.00 tax excl.
BDT 0.00 Tax
BDT 19,990.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0796

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

(0)
Three DOF (degree of freedom) leg  Can walk in any direction.  Maximum torque of 13kg for the legs.
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0284

5.8GHz Circular Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV Multicopter

(0)
Gain: 2.0dBi-2.5dBi Antenna connector: RP-SMA Male Connector Standing wave ratio(SWR): <1.5 Weight: TxA10.3g, RxA 11.5g TxA is a circular-polarized Omni antenna with three lobes RxA is a circular-polarized Omni antenna with four lobes
BDT 880.00
BDT 880.00 tax incl.
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 880.00 tax incl.
BDT 880.00 tax incl.
BDT 0.00 Tax
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 0.00 Tax
BDT 880.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0161

20x4 Character LCD

(0)
Model: LCD2004 Character Color: White Backlight: Blue Supply voltage: 5V Dimensions(L x W x H) mm: 98 x 60 x 12
BDT 343.00
BDT 343.00 tax incl.
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 343.00 tax incl.
BDT 343.00 tax incl.
BDT 0.00 Tax
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 0.00 Tax
BDT 343.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1315

PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650.00
BDT 2,650.00 tax incl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax incl.
BDT 2,650.00 tax incl.
BDT 0.00 Tax
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 0.00 Tax
BDT 2,650.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-1253

Wuli bot Programmable Robot

(0)
Program Software: Mixly + XR Scratch(base on Scratch2.0) Input: Edge sensor, Button, IR receiver module, Ultrasonic sensor, Tracking sensor Output: Buzzer, RGBLED, Two motor port,OLED CPU: Arduino UNO R3 Power: 2Pcs 3.7V DC Lithium battery Control: WiFi control/IR remote
BDT 17,990.00
BDT 17,990.00 tax incl.
BDT 17,990.00 tax excl.
BDT 17,990.00 tax excl.
BDT 17,990.00 tax incl.
BDT 17,990.00 tax incl.
BDT 0.00 Tax
BDT 17,990.00 tax excl.
BDT 17,990.00 tax excl.
BDT 0.00 Tax
BDT 17,990.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0716

65mm Rubber Wheel with 25GA Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0433

I2C LCD Adapter Module

(0)
5V power supply. Serial I2C control of LCD display using PCF8574. RoboticsBD Backlight can be enabled or disabled via a jumper on the board. Contrast control via a potentiometer. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In Stock
In stock: 649

Reference: RBD-2550

Tuya 7in1 WiFi Air Quality Monitor PM2.5 CO2 TVOC HCHO AQI

(0)
This multi-functional air quality monitor offers simultaneous testing for PM2.5, CO2, TVOC, HCHO, AQI, temperature, and humidity. Featuring a 2.8-inch TFT color display, it provides clear and easy-to-read detection data. Additionally, the monitor can be connected to the Tuya App for real-time air quality monitoring and historical data trend analysis...
BDT 6,450.00
BDT 6,450.00 tax incl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax incl.
BDT 6,450.00 tax incl.
BDT 0.00 Tax
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 0.00 Tax
BDT 6,450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: 1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,540.00
BDT 3,540.00 tax incl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax incl.
BDT 3,540.00 tax incl.
BDT 0.00 Tax
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 0.00 Tax
BDT 3,540.00 tax incl.
More
Out-of-Stock
In stock: -10

Reference: RBD-1129

Brand: RoboticsBD

Otto Bot Complete

(0)
Complete Assembled  Plug and Play Open Source Design Compatible With Arduino IDE DIY Kit
BDT 7,890.00 BDT 8,890.00
BDT 8,890.00 BDT 7,890.00 tax incl.
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 8,890.00 BDT 7,890.00 tax incl.
BDT 8,890.00 BDT 7,890.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 8,890.00 BDT 7,890.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0918

Multifunctional Standard Aluminum Servo Bracket

(0)
Supported Motors: 10kg-cm servos (such as MG995, MG996) This product is made of high-quality materials and is durable. RoboticsBD Various sensors can be installed to complete a variety of novel interactive works through the servo controller. It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
BDT 192.00
BDT 192.00 tax incl.
BDT 192.00 tax excl.
BDT 192.00 tax excl.
BDT 192.00 tax incl.
BDT 192.00 tax incl.
BDT 0.00 Tax
BDT 192.00 tax excl.
BDT 192.00 tax excl.
BDT 0.00 Tax
BDT 192.00 tax incl.
More
In-Stock
In stock: 87

Reference: RBD-0319

K Type Thermocouple Sensor Probe for Temperature Controller

(0)
Type K Type.  Mounting thread: M6  Temperature Range:0-600°C. RoboticsBD
BDT 300.00
BDT 300.00 tax incl.
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 300.00 tax incl.
BDT 300.00 tax incl.
BDT 0.00 Tax
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 0.00 Tax
BDT 300.00 tax incl.
More
In-Stock
In stock: 113

Reference: RBD-0305

3.5 inch RPi Display

(0)
LCD Type: TFT LCD Interface: SPI Touch Screen Type: Resistive Touch Screen Controller: XPT2046 Colors: 65536 Backlight: LED Resolution: 480*320 (Pixel) Dimensions: 84.91×56.54 (MM) Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1542

A2212 1400KV Brushless Outrunner BLDC Motor

(0)
Model: A2212/10T Motor KV: 1400 Max. Efficiency Current: 6-12A No Load Current: 0.7A @10V Current Capacity: 16A/60S LiPO Batteries: 2S-3S
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 37

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640.00
BDT 3,640.00 tax incl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax incl.
BDT 3,640.00 tax incl.
BDT 0.00 Tax
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 0.00 Tax
BDT 3,640.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1252

Makeblock mBot Ranger 3-in-1 educational robot kit

(0)
Tackle any terrain with Ranger’s 3 preset forms All-terrain Off-road Land Raider Super Speedy Dashing Raptor Self-balancing Nervous Bird EASY INSTALLATION: Build in as little as 45 minutes
BDT 25,990.00
BDT 25,990.00 tax incl.
BDT 25,990.00 tax excl.
BDT 25,990.00 tax excl.
BDT 25,990.00 tax incl.
BDT 25,990.00 tax incl.
BDT 0.00 Tax
BDT 25,990.00 tax excl.
BDT 25,990.00 tax excl.
BDT 0.00 Tax
BDT 25,990.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0920

Ultrasonic Sensor Acrylic Mounting Bracket

(0)
Acrylic Body. Easy to install. compatible with HC-SR04
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-0383

ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier

(0)
Wide Supply Range: 2.0v To 5.5v Low Current Consumption Continuous Mode: Only 150µa Single-shot Auto Shut-down Programmable Data Rate: 8SPS to 860SPS It has Internal low-drift voltage reference
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9

Reference: RBD-1313

Lynxmotion Johnny 5 Combo Kit

(0)
Indoor and Outdoor Tracked Robot Platform Designed for indoor or outdoor use and performs well on many different surfaces Its a very cool and completely functional model of the ever popular movie robot
BDT 137,000.00
BDT 137,000.00 tax incl.
BDT 137,000.00 tax excl.
BDT 137,000.00 tax excl.
BDT 137,000.00 tax incl.
BDT 137,000.00 tax incl.
BDT 0.00 Tax
BDT 137,000.00 tax excl.
BDT 137,000.00 tax excl.
BDT 0.00 Tax
BDT 137,000.00 tax incl.
More
Last items in stock
In stock: 1

Follow us on Facebook