
Reference: RBD-2752
Banner
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
This is TTGO board is based on the ESP32-D0WDQ6 Wifi Module comes with a built-in 1.14inch display and also it has an onboard battery connector and battery management system. The board has an onboard USB Type – C connector which can be used to provide power and to upload code to the ESP32.Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
General Specification | |
Hardware Specifications | |
Chipset | ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor |
FLASH | QSPI flash 4MB /16MB |
SRAM | 520 kB SRAM |
Button | Reset |
Modular interface | UART、SPI、SDIO、I2C、LED PWM、TV PWM、I2S、IRGPIO、ADC、DACLNA pre-amplifier |
Display | IPS ST7789V 1.14 Inch |
Working voltage | 2.7V-4.2V |
Working current | About 67MA |
Sleep current | About 350uA |
Working temperature range | -40℃ ~ +85℃ |
Size&Weight | 51.52*25.04*8.54mm(7.81g) |
Power Supply Specifications | |
Power Supply | USB 5V/1A |
Charging current | 500mA |
Battery | 3.7V lithium battery |
JST Connector | 2Pin 1.25mm |
USB | Type-C |
Wi-Fi | |
Standard | FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip) |
Protocol | 802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4μS Protection interval |
Frequency range | 2.4GHz~2.5GHz(2400M~2483.5M) |
Transmit Power | 22dBm |
Communication distance | 300m |
Bluetooth | |
Protocol | Meet BLE v4.2BR/EDR and BLE standard |
Radio frequency | With -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH |
Audio frequency | CVSD&SBC audio frequency |
Software specification | |
Wi-Fi Mode | Station/SoftAP/SoftAP+Station/P2P |
Security mechanism | WPA/WPA2/WPA2-Enterprise/WPS |
Encryption Type | AES/RSA/ECC/SHA |
Firmware upgrade | UART download/OTA(Through network/host to download and write firmware) |
Software Development | Support cloud server development /SDK for user firmware development |
Networking protocol | IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT |
User Configuration | AT + Instruction set, cloud server, android/iOSapp |
OS | FreeRTOS |
Operating Voltage (VDC) | 2.7 ~ 4.2 |
Max. Operating Current (mA) | 60 |
Working Temperature Range (°C) | -40 to 85 |
Length (mm) | 51.52 |
Width (mm) | 25.04 |
Height (mm) | 8.5 |
Weight (gm) | 7.81 |
Shipment Weight | 0.012 kg |
Shipment Dimensions | 8 × 8 × 2 cm |
Please allow 5% measuring deviation due to manual measurement.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
1 x TTGO ESP32 WiFi and Bluetooth Development Board with 1.14″ LCD Display
1 x Battery Connector
2 x 12 Pin Male Header.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RBD-2752
Reference: RBD-1761
Reference: RBD-2137
Reference: RBD-1807
Reference: RBD-1809
Reference: RBD-0350
Reference: RBD-1131
Reference: RBD-1133
Reference: RBD-2483
Brand: Arduino Official
Reference: RBD-2764
Reference: RBD-1215
Reference: RBD-2242
Reference: RBD-2241
Reference: RBD-2887
Reference: RBD-0658
Reference: RBD-2244
Reference: RBD-0948
Reference: RBD-1407
Reference: RBD-1412
Reference: RBD-1558
Reference: RBD-1671
Reference: RBD-1765
Reference: RBD-1806
Reference: RBD-1852
Reference: RBD-1945
check_circle
check_circle