Home

  • Banner

  • Sold-out
TPU Filament Plastic For 3D Printer 1.
  • TPU Filament Plastic For 3D Printer 1.

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

RBD-1317

  • TPU rubber based Material.
  • Very flexible and elastic.
  • Shore A Hardness at 87A.
  • Tensile Strength 52 MPa.
Color
BDT 2,300
BDT 2,300 BDT 2,300 BDT 2,300 BDT 2,300
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 2,300 Tax excluded
BDT 2,300 Tax included
BDT 0 Tax
BDT 2,300 Tax excluded
BDT 0 Tax
BDT 2,300 Tax included
Quantity
Sold-out

There are not enough products in stock
Description

কেন ভালো মানের ফিলামেন্ট ব্যবহার করা উচিৎ

3D প্রিন্টিং এর জন্য ভালো এবং গুণগত মানসম্পন্ন ফিলামেন্ট খুবই প্রয়োজন। লোকাল,সস্তা এবং খোলা ফিলামেন্ট ব্যবহার করে ভালো মানের প্রিন্ট পাওয়া যায় না, প্রিন্ট বেডে বসবে না, প্রচুর ফিলামেন্ট অপচয় হবে এবং 3D প্রিন্টারের হার্ডওয়ারের ক্ষতি হতে পারে। আমাদের ফিলামেন্ট গুলো অনেক পর্যবেক্ষণ করে আনা হয়। ফিলামেন্ট গুলো “vacuum-seal” করা থাকে। এজন্য আমাদের ফিলামেন্ট গুলোর কোয়ালিটি বাজারের মধ্যে সব থেকে উন্নতমানের।  লোকাল খোলা ফিলামেন্ট কেনার আগে বিষয় গুলো যাচাই করে নিবেন। সস্তা ফিলামেন্ট কিনে 3D প্রিন্টারের ক্ষতি করবেন না। 

TPU Filament Plastic is a kind of transparent soft elastic material, or soft PLA, with high flexibility and very high mechanical strength (flexural tensile resistance), wear resistance, aging resistance. It is also very good at chemical resistance, water resistance, oil, and solvent resistance.

Not only that, but TPU Filament Plastic also has waterproof, coldproof and anti-ultraviolet features. This filament is very flexible and elastic with a Shore A Hardness of 87. RoboticsBD

TPU filaments are high-quality professional-grade filaments and are compatible with all FDM printers such as MakerBot, Reprap, UP, Afinia, Flash Forge and all FDM 3D Printers. Ensure that the printer is capable of handling flexible filament.  Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features:

  1. TPU rubber based.
  2. Very flexible and elastic.
  3. Shore A Hardness at 87A.
  4. Tensile Strength 52 MPa.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
BrandGeneric
MaterialTPU (thermoplastic Polyurethane)
Filament Diameter (mm)1.75
Filament Weight and Length500gram/ 165 Meters
Density ( g/cm³)1.12
Melt Flow Index (g/10min)5 (10min, 2.16kg)
Shock Resistance ( KJ/m²)7 KJ/m²
Dimensional Accuracy (mm)170±0.1
Roundness Accuracy (mm)±0.5
Spool Size (mm)Hub Diameter: 32
Outer Diameter: 200
Width Diameter: 60
Melt Point (°C)180
ColorNatural
Shipment Weight0.8 kg
Shipment Dimensions11 × 11 × 8 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Package Includes:

1 x TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-1317

Specific References

EAN13
1317
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
- BDT 35 Reduced price DRV8825 Stepper Motor Driver Module Robotics Bangladesh DRV8825 Stepper Motor Driver Module Robotics Bangladesh

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 159 BDT 194
BDT 194 BDT 159 tax incl.
BDT 194 BDT 159 tax excl.
BDT 194 BDT 159 tax excl.
BDT 194 BDT 159 tax incl.
BDT 194 BDT 159 tax incl.
BDT 0 BDT 0 Tax
BDT 194 BDT 159 tax excl.
BDT 194 BDT 159 tax excl.
BDT 0 BDT 0 Tax
BDT 194 BDT 159 tax incl.
More DRV8825 Stepper Motor Driver Module
In-Stock
In stock: 67
5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh 5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500
BDT 3,500 tax incl.
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 3,500 tax incl.
BDT 3,500 tax incl.
BDT 0 Tax
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 0 Tax
BDT 3,500 tax incl.
More 5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3
In-Stock
In stock: 11
Sold-out Anycubic I3 Mega 3D Printer Robotics Bangladesh Anycubic I3 Mega 3D Printer Robotics Bangladesh

Reference: 1113

Brand: Anycubic

Anycubic I3 Mega 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 30,999
BDT 30,999 tax incl.
BDT 30,999 tax excl.
BDT 30,999 tax excl.
BDT 30,999 tax incl.
BDT 30,999 tax incl.
BDT 0 Tax
BDT 30,999 tax excl.
BDT 30,999 tax excl.
BDT 0 Tax
BDT 30,999 tax incl.
More Anycubic I3 Mega 3D Printer
Sold-out
In stock: 0
Sold-out Creality Ender-3 V2 3D Printer Robotics Bangladesh Creality Ender-3 V2 3D Printer Robotics Bangladesh

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

(0)
Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here
BDT 43,950
BDT 43,950 tax incl.
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 43,950 tax incl.
BDT 43,950 tax incl.
BDT 0 Tax
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 0 Tax
BDT 43,950 tax incl.
More Creality Ender-3 V2 3D Printer
Sold-out
In stock: 0
Creality CR-M4 3D Printer Robotics Bangladesh Creality CR-M4 3D Printer Robotics Bangladesh

Reference: RBD-2525

Brand: Creality Official

Creality CR-M4 3D Printer

(0)
Large format build volume (450x450x470mm) Quasi-industrial grade construction Dual Y-axis linear rails 25-point auto-leveling Flexible PC surface In-Stock Now
BDT 182,000
BDT 182,000 tax incl.
BDT 182,000 tax excl.
BDT 182,000 tax excl.
BDT 182,000 tax incl.
BDT 182,000 tax incl.
BDT 0 Tax
BDT 182,000 tax excl.
BDT 182,000 tax excl.
BDT 0 Tax
BDT 182,000 tax incl.
More Creality CR-M4 3D Printer
Last items in stock
In stock: 1
Flexible TPU Filament Plastic For 3D Printer 1. Flexible TPU Filament Plastic For 3D Printer 1.

Reference: RBD-1391

Sunlu Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,910
BDT 3,910 tax incl.
BDT 3,910 tax excl.
BDT 3,910 tax excl.
BDT 3,910 tax incl.
BDT 3,910 tax incl.
BDT 0 Tax
BDT 3,910 tax excl.
BDT 3,910 tax excl.
BDT 0 Tax
BDT 3,910 tax incl.
More Sunlu Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll
Last items in stock
In stock: 1
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Creality Ender-3 V3 KE 3D Printer Robotics Bangladesh Creality Ender-3 V3 KE 3D Printer Robotics Bangladesh

Reference: RBD-4033

Brand: Creality Official

Creality Ender-3 V3 KE 3D Printer

(0)
High-speed 500 mm/s 3D printing with stable motion control Sprite direct drive extruder supports up to 300 °C nozzle temperature Hands-free automatic bed leveling for perfect first layers Smooth X-axis linear rail for higher precision and surface quality WiFi, LAN, USB & phone app control with Creality Cloud support Compact, quick-assembly design...
BDT 38,650
BDT 38,650 tax incl.
BDT 38,650 tax excl.
BDT 38,650 tax excl.
BDT 38,650 tax incl.
BDT 38,650 tax incl.
BDT 0 Tax
BDT 38,650 tax excl.
BDT 38,650 tax excl.
BDT 0 Tax
BDT 38,650 tax incl.
More Creality Ender-3 V3 KE 3D Printer
Out-of-Stock
In stock: 0
Sold-out Anycubic I3 Mega V5 J-head Hotend 3D Printer Extruder Print Head - Original Robotics Bangladesh Anycubic I3 Mega V5 J-head Hotend 3D Printer Extruder Print Head - Original Robotics Bangladesh

Reference: RBD-2948

Anycubic I3 Mega V5 J-head Hotend 3D Printer Extruder Print Head - Original

(0)
Compatible with I3 Mega, I3 Mega X, Mega S 3D printers. Pre-assembled hotend kits with 12V 40W cartridge heater. Heat resistant aluminum heating block, temperature up to 250℃. Easy to install with connectors for thermistor and heating rod. Supports 1.75mm PLA, ABS, WOOD, PETG, and TPU filaments.
BDT 1,050
BDT 1,050 tax incl.
BDT 1,050 tax excl.
BDT 1,050 tax excl.
BDT 1,050 tax incl.
BDT 1,050 tax incl.
BDT 0 Tax
BDT 1,050 tax excl.
BDT 1,050 tax excl.
BDT 0 Tax
BDT 1,050 tax incl.
More Anycubic I3 Mega V5 J-head Hotend 3D Printer Extruder Print Head - Original
Sold-out
In stock: 0
Impact Switch Collision Switch Sensor Module Robotics Bangladesh

Reference: RBD-2833

Impact Switch Collision Switch Sensor Module

(0)
Compact impact/collision detection sensor module for Arduino and robotics Converts mechanical impact into an electrical signal output Lightweight design, only 3g with 25 × 14 × 6 mm dimensions Simple installation with M3 mounting hole for small cars and robotics projects Low-level output trigger when collision/impact occurs Ideal for DIY robotics,...
BDT 90
BDT 90 tax incl.
BDT 90 tax excl.
BDT 90 tax excl.
BDT 90 tax incl.
BDT 90 tax incl.
BDT 0 Tax
BDT 90 tax excl.
BDT 90 tax excl.
BDT 0 Tax
BDT 90 tax incl.
More Impact Switch Collision Switch Sensor Module
In-Stock
In stock: 27
- BDT 600 Reduced price Creality Hyper Series PLA 3D Printing Filament 1KG Robotics Bangladesh Creality Hyper Series PLA 3D Printing Filament 1KG Robotics Bangladesh

Reference: RBD-3054

Creality Hyper Series PLA 3D Printing Filament 1KG

(0)
High-Speed Printing Performance: Achieve up to 10x faster printing speeds (up to 600mm/s) without compromising print quality. Enhanced Strength & Toughness: Stronger than ABS, more impact-resistant than standard PLA, ideal for durable prints. Precision Under Pressure: Maintains dimensional accuracy and smooth finish at high speeds with minimal...
BDT 3,900 BDT 4,500
BDT 4,500 BDT 3,900 tax incl.
BDT 4,500 BDT 3,900 tax excl.
BDT 4,500 BDT 3,900 tax excl.
BDT 4,500 BDT 3,900 tax incl.
BDT 4,500 BDT 3,900 tax incl.
BDT 0 BDT 0 Tax
BDT 4,500 BDT 3,900 tax excl.
BDT 4,500 BDT 3,900 tax excl.
BDT 0 BDT 0 Tax
BDT 4,500 BDT 3,900 tax incl.
More Creality Hyper Series PLA 3D Printing Filament 1KG
Last items in stock
In stock: 1
Yellow Red Black Blue Transparent Gray Cyan Orange Green Red Copper Grass Green Gold White
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh

Reference: RBD-1678

A4988 Big Easy Driver Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 399
BDT 399 tax incl.
BDT 399 tax excl.
BDT 399 tax excl.
BDT 399 tax incl.
BDT 399 tax incl.
BDT 0 Tax
BDT 399 tax excl.
BDT 399 tax excl.
BDT 0 Tax
BDT 399 tax incl.
More A4988 Big Easy Driver Stepper Motor Driver
In-Stock
In stock: 45
Creality Hi Combo 3D Printer Robotics Bangladesh Creality Hi Combo 3D Printer Robotics Bangladesh

Reference: RBD-3542

Creality Hi Combo 3D Printer

(0)
Multicolor 3D printing with up to 16 colors via CFS×4 system Auto-calibration, filament reading, PA tuning, and leveling for hands-off setup Max print speed of 500 mm/s with active input shaping for stable, fast printing Built-in camera with privacy cap and 3.2" fold-away touchscreen for smart control Rigid all-metal aluminum body with advanced...
BDT 79,950
BDT 79,950 tax incl.
BDT 79,950 tax excl.
BDT 79,950 tax excl.
BDT 79,950 tax incl.
BDT 79,950 tax incl.
BDT 0 Tax
BDT 79,950 tax excl.
BDT 79,950 tax excl.
BDT 0 Tax
BDT 79,950 tax incl.
More Creality Hi Combo 3D Printer
Last items in stock
In stock: 2
Sunlu Transparent PLA+ 3D Printer Filament 1.

Reference: RBD-3064

Sunlu Transparent PLA+ 3D Printer Filament 1.75mm 1kg-Roll

(0)
Enhanced PLA+ filament offering improved strength, durability, and heat resistance. Eco-friendly, biodegradable material with easy printing properties. Ideal for functional prototypes and end-use products. Available in a 1.75mm diameter with a 1kg spool. Low warping and high dimensional accuracy for consistent, stable prints.
BDT 2,895
BDT 2,895 tax incl.
BDT 2,895 tax excl.
BDT 2,895 tax excl.
BDT 2,895 tax incl.
BDT 2,895 tax incl.
BDT 0 Tax
BDT 2,895 tax excl.
BDT 2,895 tax excl.
BDT 0 Tax
BDT 2,895 tax incl.
More Sunlu Transparent PLA+ 3D Printer Filament 1.75mm 1kg-Roll
Last items in stock
In stock: 2
Sold-out Anycubic Photon Zero Resin 3D Printer Robotics Bangladesh

Reference: 1375

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

(0)
Technique: LCD-based SLA Printing Speed: 30mm(H)/hour Power: 30W
BDT 36,990
BDT 36,990 tax incl.
BDT 36,990 tax excl.
BDT 36,990 tax excl.
BDT 36,990 tax incl.
BDT 36,990 tax incl.
BDT 0 Tax
BDT 36,990 tax excl.
BDT 36,990 tax excl.
BDT 0 Tax
BDT 36,990 tax incl.
More Anycubic Photon Zero Resin 3D Printer
Sold-out
In stock: 0
Sold-out Creality CR-10 Smart 3D Printer Robotics Bangladesh Creality CR-10 Smart 3D Printer Robotics Bangladesh

Reference: RBD-1733

Brand: Creality Official

Creality CR-10 Smart 3D Printer

(0)
Built-in WIFI function: Remote control printing anytime, anywhere; A Bit More Intelligence Ultra-silent Design: 32 Bit Mute Board and Mute Fan Design; Intelligent Auto-leveling: V2.0 Auto leveling way, is the same with CR-6 SE. Screen Protection & Auto-shutdown;. Safe and worry-free save energy and power. 6-steps to assemble 8 minutes to complete,...
BDT 72,990
BDT 72,990 tax incl.
BDT 72,990 tax excl.
BDT 72,990 tax excl.
BDT 72,990 tax incl.
BDT 72,990 tax incl.
BDT 0 Tax
BDT 72,990 tax excl.
BDT 72,990 tax excl.
BDT 0 Tax
BDT 72,990 tax incl.
More Creality CR-10 Smart 3D Printer
Sold-out
In stock: -1
Sold-out HELLO3D ABS 3D Printer Filament 1. HELLO3D ABS 3D Printer Filament 1.

Reference: RBD-1316

HELLO3D ABS 3D Printer Filament 1.75mm 1kg-Roll

(0)
Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.
BDT 2,895
BDT 2,895 tax incl.
BDT 2,895 tax excl.
BDT 2,895 tax excl.
BDT 2,895 tax incl.
BDT 2,895 tax incl.
BDT 0 Tax
BDT 2,895 tax excl.
BDT 2,895 tax excl.
BDT 0 Tax
BDT 2,895 tax incl.
More HELLO3D ABS 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out HELLO3D PLA 3D Printer Filament 1. HELLO3D PLA 3D Printer Filament 1.

Reference: RBD-1315

HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650
BDT 2,650 tax incl.
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 2,650 tax incl.
BDT 2,650 tax incl.
BDT 0 Tax
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 0 Tax
BDT 2,650 tax incl.
More HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
- BDT 23 Reduced price Heart Rate Pulse Sensor Module For Arduino Robotics Bangladesh

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 274 BDT 297
BDT 297 BDT 274 tax incl.
BDT 297 BDT 274 tax excl.
BDT 297 BDT 274 tax excl.
BDT 297 BDT 274 tax incl.
BDT 297 BDT 274 tax incl.
BDT 0 BDT 0 Tax
BDT 297 BDT 274 tax excl.
BDT 297 BDT 274 tax excl.
BDT 0 BDT 0 Tax
BDT 297 BDT 274 tax incl.
More Heart Rate Pulse Sensor Module For Arduino
In-Stock
In stock: 68
Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh

Reference: RBD-1392

Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640
BDT 3,640 tax incl.
BDT 3,640 tax excl.
BDT 3,640 tax excl.
BDT 3,640 tax incl.
BDT 3,640 tax incl.
BDT 0 Tax
BDT 3,640 tax excl.
BDT 3,640 tax excl.
BDT 0 Tax
BDT 3,640 tax incl.
More Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll
Last items in stock
In stock: 2
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
RTD PT-100 Temperature Sensor 100mm Probe 0‑400℃ Robotics Bangladesh

Reference: RBD-0493

RTD PT-100 Temperature Sensor 100mm Probe -50‑400℃

(0)
Temperature Range : 0C-400C Shield Material : Metal Total Length(Approx.) : 2M / 6.6 Ft; Weight : 46g;
BDT 990
BDT 990 tax incl.
BDT 990 tax excl.
BDT 990 tax excl.
BDT 990 tax incl.
BDT 990 tax incl.
BDT 0 Tax
BDT 990 tax excl.
BDT 990 tax excl.
BDT 0 Tax
BDT 990 tax incl.
More RTD PT-100 Temperature Sensor 100mm Probe -50‑400℃
In-Stock
In stock: 21
Arduino Uno R3 Robotics Bangladesh Arduino Uno R3 Robotics Bangladesh

Reference: RBD-0094

Arduino Uno R3

(0)
The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
BDT 988
BDT 988 tax incl.
BDT 988 tax excl.
BDT 988 tax excl.
BDT 988 tax incl.
BDT 988 tax incl.
BDT 0 Tax
BDT 988 tax excl.
BDT 988 tax excl.
BDT 0 Tax
BDT 988 tax incl.
More Arduino Uno R3
In-Stock
In stock: 480
Breadboard (Medium Size) Robotics Bangladesh

Reference: RBD-0120

Breadboard Half Size Bare 400 Tie Points

(0)
400 tie points 2 Power lanes, Total 100 tie points in power lanes 1 Double strip, Total 300 tie points Perfect for Arduino shield prototyping and testing Plastic housing, metal contact clips
BDT 88
BDT 88 tax incl.
BDT 88 tax excl.
BDT 88 tax excl.
BDT 88 tax incl.
BDT 88 tax incl.
BDT 0 Tax
BDT 88 tax excl.
BDT 88 tax excl.
BDT 0 Tax
BDT 88 tax incl.
More Breadboard Half Size Bare 400 Tie Points
In-Stock
In stock: 248
- BDT 14 Reduced price Breadboard Full Size Bare 830 Tie Points Robotics Bangladesh Breadboard Full Size Bare 830 Tie Points Robotics Bangladesh

Reference: RBD-0133

Breadboard Full Size Bare 830 Tie Points

(0)
830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG
BDT 145 BDT 159
BDT 159 BDT 145 tax incl.
BDT 159 BDT 145 tax excl.
BDT 159 BDT 145 tax excl.
BDT 159 BDT 145 tax incl.
BDT 159 BDT 145 tax incl.
BDT 0 BDT 0 Tax
BDT 159 BDT 145 tax excl.
BDT 159 BDT 145 tax excl.
BDT 0 BDT 0 Tax
BDT 159 BDT 145 tax incl.
More Breadboard Full Size Bare 830 Tie Points
In-Stock
In stock: 163
- BDT 200 Reduced price IMAX B6-AC Charger/Discharger 1-6 Cells Dual Power 80W Robotics Bangladesh IMAX B6-AC Charger/Discharger 1-6 Cells Dual Power 80W Robotics Bangladesh

Reference: RBD-0215

IMAX B6-AC Charger/Discharger 1-6 Cells Dual Power 80W

(0)
AC 100~240v or 12V DC input The cables come with a fitted fuse. Microprocessor controlled Li-ion, LiPo, and LiFe capable Input voltage monitoring. (Protects car batteries at the field) Battery break-in and cycling feature Data storage (Store up to 5 packs in memory) Internal resistance checker to see pack health Delta-peak sensitivity Individual cell...
BDT 4,285 BDT 4,485
BDT 4,485 BDT 4,285 tax incl.
BDT 4,485 BDT 4,285 tax excl.
BDT 4,485 BDT 4,285 tax excl.
BDT 4,485 BDT 4,285 tax incl.
BDT 4,485 BDT 4,285 tax incl.
BDT 0 BDT 0 Tax
BDT 4,485 BDT 4,285 tax excl.
BDT 4,485 BDT 4,285 tax excl.
BDT 0 BDT 0 Tax
BDT 4,485 BDT 4,285 tax incl.
More IMAX B6-AC Charger/Discharger 1-6 Cells Dual Power 80W
In-Stock
In stock: 6
You might also like
Sold-out Anycubic I3 Mega S 3D Printer Robotics Bangladesh Anycubic I3 Mega S 3D Printer Robotics Bangladesh

Reference: 1265

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 38,999
BDT 38,999 tax incl.
BDT 38,999 tax excl.
BDT 38,999 tax excl.
BDT 38,999 tax incl.
BDT 38,999 tax incl.
BDT 0 Tax
BDT 38,999 tax excl.
BDT 38,999 tax excl.
BDT 0 Tax
BDT 38,999 tax incl.
More Anycubic I3 Mega S 3D Printer
Sold-out
In stock: 0
Sold-out Creality CR-10 Smart 3D Printer Robotics Bangladesh Creality CR-10 Smart 3D Printer Robotics Bangladesh

Reference: RBD-1733

Brand: Creality Official

Creality CR-10 Smart 3D Printer

(0)
Built-in WIFI function: Remote control printing anytime, anywhere; A Bit More Intelligence Ultra-silent Design: 32 Bit Mute Board and Mute Fan Design; Intelligent Auto-leveling: V2.0 Auto leveling way, is the same with CR-6 SE. Screen Protection & Auto-shutdown;. Safe and worry-free save energy and power. 6-steps to assemble 8 minutes to complete,...
BDT 72,990
BDT 72,990 tax incl.
BDT 72,990 tax excl.
BDT 72,990 tax excl.
BDT 72,990 tax incl.
BDT 72,990 tax incl.
BDT 0 Tax
BDT 72,990 tax excl.
BDT 72,990 tax excl.
BDT 0 Tax
BDT 72,990 tax incl.
More Creality CR-10 Smart 3D Printer
Sold-out
In stock: -1
Sold-out Creality CR-6 SE Leveling-free DIY 3D Printer Kit Robotics Bangladesh Creality CR-6 SE Leveling-free DIY 3D Printer Kit Robotics Bangladesh

Reference: 1404

Brand: Creality Official

Creality CR-6 SE Leveling-free DIY 3D Printer Kit

(0)
Modeling Technology: FDM（Fused Deposition Modeling） File Formats: STL/OBJ/AMF Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D Print Speed: 80-100mm/s Resume Print Function: Yes Printing Size: 235x235x250mm
BDT 49,990
BDT 49,990 tax incl.
BDT 49,990 tax excl.
BDT 49,990 tax excl.
BDT 49,990 tax incl.
BDT 49,990 tax incl.
BDT 0 Tax
BDT 49,990 tax excl.
BDT 49,990 tax excl.
BDT 0 Tax
BDT 49,990 tax incl.
More Creality CR-6 SE Leveling-free DIY 3D Printer Kit
Sold-out
In stock: 0
Sold-out Creality Ender-3 V2 3D Printer Robotics Bangladesh Creality Ender-3 V2 3D Printer Robotics Bangladesh

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

(0)
Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here
BDT 43,950
BDT 43,950 tax incl.
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 43,950 tax incl.
BDT 43,950 tax incl.
BDT 0 Tax
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 0 Tax
BDT 43,950 tax incl.
More Creality Ender-3 V2 3D Printer
Sold-out
In stock: 0
Sold-out HELLO3D ABS 3D Printer Filament 1. HELLO3D ABS 3D Printer Filament 1.

Reference: RBD-1316

HELLO3D ABS 3D Printer Filament 1.75mm 1kg-Roll

(0)
Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.
BDT 2,895
BDT 2,895 tax incl.
BDT 2,895 tax excl.
BDT 2,895 tax excl.
BDT 2,895 tax incl.
BDT 2,895 tax incl.
BDT 0 Tax
BDT 2,895 tax excl.
BDT 2,895 tax excl.
BDT 0 Tax
BDT 2,895 tax incl.
More HELLO3D ABS 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out HELLO3D PLA 3D Printer Filament 1. HELLO3D PLA 3D Printer Filament 1.

Reference: RBD-1315

HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650
BDT 2,650 tax incl.
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 2,650 tax incl.
BDT 2,650 tax incl.
BDT 0 Tax
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 0 Tax
BDT 2,650 tax incl.
More HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out PLA Filament for 3D Pen Robotics Bangladesh

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 50
BDT 50 tax incl.
BDT 50 tax excl.
BDT 50 tax excl.
BDT 50 tax incl.
BDT 50 tax incl.
BDT 0 Tax
BDT 50 tax excl.
BDT 50 tax excl.
BDT 0 Tax
BDT 50 tax incl.
More PLA Filament for 3D Pen
Sold-out
In stock: 0
Flexible TPU Filament Plastic For 3D Printer 1. Flexible TPU Filament Plastic For 3D Printer 1.

Reference: RBD-1391

Sunlu Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,910
BDT 3,910 tax incl.
BDT 3,910 tax excl.
BDT 3,910 tax excl.
BDT 3,910 tax incl.
BDT 3,910 tax incl.
BDT 0 Tax
BDT 3,910 tax excl.
BDT 3,910 tax excl.
BDT 0 Tax
BDT 3,910 tax incl.
More Sunlu Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll
Last items in stock
In stock: 1
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh

Reference: RBD-1392

Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640
BDT 3,640 tax incl.
BDT 3,640 tax excl.
BDT 3,640 tax excl.
BDT 3,640 tax incl.
BDT 3,640 tax incl.
BDT 0 Tax
BDT 3,640 tax excl.
BDT 3,640 tax excl.
BDT 0 Tax
BDT 3,640 tax incl.
More Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll
Last items in stock
In stock: 2
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out TPU Filament Plastic For 3D Printer 1. TPU Filament Plastic For 3D Printer 1.

Reference: RBD-1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300
BDT 2,300 tax incl.
BDT 2,300 tax excl.
BDT 2,300 tax excl.
BDT 2,300 tax incl.
BDT 2,300 tax incl.
BDT 0 Tax
BDT 2,300 tax excl.
BDT 2,300 tax excl.
BDT 0 Tax
BDT 2,300 tax incl.
More TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White

Follow us on Facebook

Facebook