Home

  • Banner

  • Sold-out
HELLO3D ABS 3D Printer Filament 1.
  • HELLO3D ABS 3D Printer Filament 1.

HELLO3D ABS 3D Printer Filament 1.75mm 1kg-Roll

RBD-1316

  • Tougher and stronger
  • Less warping (about 0.4% compared to over 8% in regular ABS)
  • Prints smoother & smoother printed objects
  • Better scratch, heat and oil resistance
  • Can be polished using acetone
  • Can be easily colored.
Color
BDT 2,895
BDT 2,895 BDT 2,895 BDT 2,895 BDT 2,895
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 2,895 Tax excluded
BDT 2,895 Tax included
BDT 0 Tax
BDT 2,895 Tax excluded
BDT 0 Tax
BDT 2,895 Tax included
Quantity
Sold-out

1 person has purchased this item
There are not enough products in stock
Description

কেন ভালো মানের ফিলামেন্ট ব্যবহার করা উচিৎ

3D প্রিন্টিং এর জন্য ভালো এবং গুণগত মানসম্পন্ন ফিলামেন্ট খুবই প্রয়োজন। লোকাল,সস্তা এবং খোলা ফিলামেন্ট ব্যবহার করে ভালো মানের প্রিন্ট পাওয়া যায় না, প্রিন্ট বেডে বসবে না, প্রচুর ফিলামেন্ট অপচয় হবে এবং 3D প্রিন্টারের হার্ডওয়ারের ক্ষতি হতে পারে। আমাদের ফিলামেন্ট গুলো অনেক পর্যবেক্ষণ করে আনা হয়। ফিলামেন্ট গুলো “vacuum-seal” করা থাকে। এজন্য আমাদের ফিলামেন্ট গুলোর কোয়ালিটি বাজারের মধ্যে সব থেকে উন্নতমানের।  লোকাল খোলা ফিলামেন্ট কেনার আগে বিষয় গুলো যাচাই করে নিবেন। সস্তা ফিলামেন্ট কিনে 3D প্রিন্টারের ক্ষতি করবেন না। 

High quality ABS filament material for smooth extruding and high impact resistance. 100% made with highest quality products, no bubbles or clogs. Vacuum packing with 100% quality acceptance test during production. The recommended extruding temp. 225C - 245C, and Platform temp. 90 - 110C, These temperatures setting depend on heat dissipating due to many parameters, such as the size of the project, the printer enclosure, cooling fan air flow direction and the accuracy of thermo-couple readings at the nozzle etc  Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features:

  1. Tougher and stronger
  2. Less warping (about 0.4% compared to over 8% in regular ABS)
  3. Prints smoother & smoother printed objects
  4. Better scratch, heat and oil resistance
  5. Can be polished using acetone
  6. Can be easily colored.

Maintenance tips:
  1. Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
  2. Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
  3. ABS will produce a slight irritating smell, please print in a well-ventilated environment.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
BrandHELLO3D
MaterialABS
Filament Diameter (mm)1.75
Filament Weight and Length1 kg/ 330 Meters
Melt Flow Index (g/10min)15(220°C/10kg)
Shock Resistance ( KJ/m²)7 KJ/m²
Dimensional Accuracy (mm)170±0.1
Roundness Accuracy (mm)±0.5
Spool Size (mm)Hub Diameter- 50
Width: 65
Outer Diameter: 200
Melt Point (°C)220
ColorBlack
Spool DimensionsInner diameter: 50 mm
Outer diameter: 200 mm
Weight of spool 300 g
Width: 65 mm
Shipment Weight1.5 kg
Shipment Dimensions22 × 22 × 8 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Package Includes:

1 x ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-1316

Specific References

EAN13
1316
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Sold-out HELLO3D PLA 3D Printer Filament 1. HELLO3D PLA 3D Printer Filament 1.

Reference: RBD-3252

Sunlu PLA Carbon Fiber 3D Printer Filament 1.75mm 1kg-Roll

(0)
High-Quality PLA Carbon Fiber Filament: Ensures smooth and precise printing with enhanced strength. Dimensional Accuracy: Maintains a ±0.02mm tolerance, preventing clogging and bubbles. Functional Material: High stiffness, low density, and lightweight, ideal for thin and hollow models. Broad Compatibility: Works seamlessly with SUNLU 3D printers and most...
BDT 4,185
BDT 4,185 tax incl.
BDT 4,185 tax excl.
BDT 4,185 tax excl.
BDT 4,185 tax incl.
BDT 4,185 tax incl.
BDT 0 Tax
BDT 4,185 tax excl.
BDT 4,185 tax excl.
BDT 0 Tax
BDT 4,185 tax incl.
More Sunlu PLA Carbon Fiber 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out TPU Filament Plastic For 3D Printer 1. TPU Filament Plastic For 3D Printer 1.

Reference: RBD-1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300
BDT 2,300 tax incl.
BDT 2,300 tax excl.
BDT 2,300 tax excl.
BDT 2,300 tax incl.
BDT 2,300 tax incl.
BDT 0 Tax
BDT 2,300 tax excl.
BDT 2,300 tax excl.
BDT 0 Tax
BDT 2,300 tax incl.
More TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Creality Ender-3 V3 KE 3D Printer Robotics Bangladesh Creality Ender-3 V3 KE 3D Printer Robotics Bangladesh

Reference: RBD-4033

Brand: Creality Official

Creality Ender-3 V3 KE 3D Printer

(0)
High-speed 500 mm/s 3D printing with stable motion control Sprite direct drive extruder supports up to 300 °C nozzle temperature Hands-free automatic bed leveling for perfect first layers Smooth X-axis linear rail for higher precision and surface quality WiFi, LAN, USB & phone app control with Creality Cloud support Compact, quick-assembly design...
BDT 38,650
BDT 38,650 tax incl.
BDT 38,650 tax excl.
BDT 38,650 tax excl.
BDT 38,650 tax incl.
BDT 38,650 tax incl.
BDT 0 Tax
BDT 38,650 tax excl.
BDT 38,650 tax excl.
BDT 0 Tax
BDT 38,650 tax incl.
More Creality Ender-3 V3 KE 3D Printer
Out-of-Stock
In stock: 0
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver Robotics Bangladesh

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 4,650
BDT 4,650 tax incl.
BDT 4,650 tax excl.
BDT 4,650 tax excl.
BDT 4,650 tax incl.
BDT 4,650 tax incl.
BDT 0 Tax
BDT 4,650 tax excl.
BDT 4,650 tax excl.
BDT 0 Tax
BDT 4,650 tax incl.
More Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver
In-Stock
In stock: 39
Micro Limit Switches Robotics Bangladesh Micro Limit Switches Robotics Bangladesh

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130
BDT 130 tax incl.
BDT 130 tax excl.
BDT 130 tax excl.
BDT 130 tax incl.
BDT 130 tax incl.
BDT 0 Tax
BDT 130 tax excl.
BDT 130 tax excl.
BDT 0 Tax
BDT 130 tax incl.
More Micro Limit Switches
In-Stock
In stock: 231
Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,390
BDT 1,390 tax incl.
BDT 1,390 tax excl.
BDT 1,390 tax excl.
BDT 1,390 tax incl.
BDT 1,390 tax incl.
BDT 0 Tax
BDT 1,390 tax excl.
BDT 1,390 tax excl.
BDT 0 Tax
BDT 1,390 tax incl.
More Nema 17 Stepper Motor 17HS4401S
In-Stock
In stock: 13
Sold-out mDrawbot kit Robotics Bangladesh mDrawbot kit Robotics Bangladesh

Reference: RBD-1311

mDrawbot kit

(0)
mDrawBot is a 4-in-1 drawing robot kit  it can be assembled into 4 different drawing robots:  mScara. mCar.  mSpider.  mEggBot.
BDT 21,300
BDT 21,300 tax incl.
BDT 21,300 tax excl.
BDT 21,300 tax excl.
BDT 21,300 tax incl.
BDT 21,300 tax incl.
BDT 0 Tax
BDT 21,300 tax excl.
BDT 21,300 tax excl.
BDT 0 Tax
BDT 21,300 tax incl.
More mDrawbot kit
Sold-out
In stock: 0
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh

Reference: RBD-1678

A4988 Big Easy Driver Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 399
BDT 399 tax incl.
BDT 399 tax excl.
BDT 399 tax excl.
BDT 399 tax incl.
BDT 399 tax incl.
BDT 0 Tax
BDT 399 tax excl.
BDT 399 tax excl.
BDT 0 Tax
BDT 399 tax incl.
More A4988 Big Easy Driver Stepper Motor Driver
In-Stock
In stock: 45
Creality K1 Max AI Fast 3D Printer Robotics Bangladesh Creality K1 Max AI Fast 3D Printer Robotics Bangladesh

Reference: RBD-2526

Brand: Creality Official

Creality K1 Max AI Fast 3D Printer

(0)
 600mm/s Max Speed  20000mm/s² Acceleration  32mm³/s Max Flow Hotend  Hands-free Auto Leveling  Self-test with One Tap  Solve Ringing with G-sensor  Unibody Die-cast Frame AI-assisted Carefree PrintingIn-Stock Now
BDT 155,000
BDT 155,000 tax incl.
BDT 155,000 tax excl.
BDT 155,000 tax excl.
BDT 155,000 tax incl.
BDT 155,000 tax incl.
BDT 0 Tax
BDT 155,000 tax excl.
BDT 155,000 tax excl.
BDT 0 Tax
BDT 155,000 tax incl.
More Creality K1 Max AI Fast 3D Printer
Pre-Order (Delivery Time 1 month)
In stock: 0
- BDT 60 Reduced price A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 105 BDT 165
BDT 165 BDT 105 tax incl.
BDT 165 BDT 105 tax excl.
BDT 165 BDT 105 tax excl.
BDT 165 BDT 105 tax incl.
BDT 165 BDT 105 tax incl.
BDT 0 BDT 0 Tax
BDT 165 BDT 105 tax excl.
BDT 165 BDT 105 tax excl.
BDT 0 BDT 0 Tax
BDT 165 BDT 105 tax incl.
More A4988 StepStick Stepper Motor Driver Module
In-Stock
In stock: 18
Creality Hi Combo 3D Printer Robotics Bangladesh Creality Hi Combo 3D Printer Robotics Bangladesh

Reference: RBD-3542

Creality Hi Combo 3D Printer

(0)
Multicolor 3D printing with up to 16 colors via CFS×4 system Auto-calibration, filament reading, PA tuning, and leveling for hands-off setup Max print speed of 500 mm/s with active input shaping for stable, fast printing Built-in camera with privacy cap and 3.2" fold-away touchscreen for smart control Rigid all-metal aluminum body with advanced...
BDT 79,950
BDT 79,950 tax incl.
BDT 79,950 tax excl.
BDT 79,950 tax excl.
BDT 79,950 tax incl.
BDT 79,950 tax incl.
BDT 0 Tax
BDT 79,950 tax excl.
BDT 79,950 tax excl.
BDT 0 Tax
BDT 79,950 tax incl.
More Creality Hi Combo 3D Printer
Last items in stock
In stock: 2
Creality Ender 3 V3 Core XZ 3D Printer Robotics Bangladesh Creality Ender 3 V3 Core XZ 3D Printer Robotics Bangladesh

Reference: RBD-3045

Creality Ender 3 V3 3D Printer

(0)
 CoreXZ for 600mm/s Printing Speed  Stable Metal Build with Die-cast Parts  Direct Extrusion on Full Power  Integrated Tri-metal Nozzle, Quick to Swap  Two Mighty Fans for Instant Cooling  Auto Calibration for Leveling and More
BDT 58,780
BDT 58,780 tax incl.
BDT 58,780 tax excl.
BDT 58,780 tax excl.
BDT 58,780 tax incl.
BDT 58,780 tax incl.
BDT 0 Tax
BDT 58,780 tax excl.
BDT 58,780 tax excl.
BDT 0 Tax
BDT 58,780 tax incl.
More Creality Ender 3 V3 3D Printer
Last items in stock
In stock: 2
Sunlu PLA+ 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh Sunlu PLA+ 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh

Reference: RBD-2107

Sunlu PLA+ 3D Printer Filament 1.75mm 1kg-Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050
BDT 3,050 tax incl.
BDT 3,050 tax excl.
BDT 3,050 tax excl.
BDT 3,050 tax incl.
BDT 3,050 tax incl.
BDT 0 Tax
BDT 3,050 tax excl.
BDT 3,050 tax excl.
BDT 0 Tax
BDT 3,050 tax incl.
More Sunlu PLA+ 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper Grass Green White
- BDT 30 Reduced price 3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA Robotics Bangladesh 3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA Robotics Bangladesh

Reference: RBD-0436

3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA

(0)
Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
BDT 670 BDT 700
BDT 700 BDT 670 tax incl.
BDT 700 BDT 670 tax excl.
BDT 700 BDT 670 tax excl.
BDT 700 BDT 670 tax incl.
BDT 700 BDT 670 tax incl.
BDT 0 BDT 0 Tax
BDT 700 BDT 670 tax excl.
BDT 700 BDT 670 tax excl.
BDT 0 BDT 0 Tax
BDT 700 BDT 670 tax incl.
More 3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA
In-Stock
In stock: 7
Sold-out Anycubic I3 Mega 3D Printer Robotics Bangladesh Anycubic I3 Mega 3D Printer Robotics Bangladesh

Reference: 1113

Brand: Anycubic

Anycubic I3 Mega 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 30,999
BDT 30,999 tax incl.
BDT 30,999 tax excl.
BDT 30,999 tax excl.
BDT 30,999 tax incl.
BDT 30,999 tax incl.
BDT 0 Tax
BDT 30,999 tax excl.
BDT 30,999 tax excl.
BDT 0 Tax
BDT 30,999 tax incl.
More Anycubic I3 Mega 3D Printer
Sold-out
In stock: 0
3D Printer Nozzle M7 Thread Brass 1.

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190
BDT 190 tax incl.
BDT 190 tax excl.
BDT 190 tax excl.
BDT 190 tax incl.
BDT 190 tax incl.
BDT 0 Tax
BDT 190 tax excl.
BDT 190 tax excl.
BDT 0 Tax
BDT 190 tax incl.
More 3D Printer Nozzle M7 Thread Brass 1.75mm
In-Stock
In stock: 17
Sold-out HELLO3D PLA 3D Printer Filament 1. HELLO3D PLA 3D Printer Filament 1.

Reference: RBD-1315

HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650
BDT 2,650 tax incl.
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 2,650 tax incl.
BDT 2,650 tax incl.
BDT 0 Tax
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 0 Tax
BDT 2,650 tax incl.
More HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll Robotics Bangladesh

Reference: RBD-1392

Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640
BDT 3,640 tax incl.
BDT 3,640 tax excl.
BDT 3,640 tax excl.
BDT 3,640 tax incl.
BDT 3,640 tax incl.
BDT 0 Tax
BDT 3,640 tax excl.
BDT 3,640 tax excl.
BDT 0 Tax
BDT 3,640 tax incl.
More Sunlu PETG 3D Printer Filament 1.75mm 1kg-Roll
Last items in stock
In stock: 2
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out Creality Ender-3 V2 3D Printer Robotics Bangladesh Creality Ender-3 V2 3D Printer Robotics Bangladesh

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

(0)
Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here
BDT 43,950
BDT 43,950 tax incl.
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 43,950 tax incl.
BDT 43,950 tax incl.
BDT 0 Tax
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 0 Tax
BDT 43,950 tax incl.
More Creality Ender-3 V2 3D Printer
Sold-out
In stock: 0
TCRT5000L Reflective Optical Sensor Robotics Bangladesh TCRT5000L Reflective Optical Sensor Robotics Bangladesh

Reference: RBD-0132

TCRT5000L Reflective Optical Sensor

(0)
The TCRT5000 and TCRT5000L are reflective sensors which include an infrared emitter and phototransistor in a leaded package which blocks visible light. The package includes two mounting clips. TCRT5000L is the long lead version.Model TCRT5000 Color Black + blue Detecting range: 0.591″ (15mm); Detecting method: Reflective; Collector-Emitter: Voltage:...
BDT 15
BDT 15 tax incl.
BDT 15 tax excl.
BDT 15 tax excl.
BDT 15 tax incl.
BDT 15 tax incl.
BDT 0 Tax
BDT 15 tax excl.
BDT 15 tax excl.
BDT 0 Tax
BDT 15 tax incl.
More TCRT5000L Reflective Optical Sensor
In-Stock
In stock: 284
20x4 Character LCD Robotics Bangladesh 20x4 Character LCD Robotics Bangladesh

Reference: RBD-0161

20x4 Character LCD Blue Backlight

(0)
Model: LCD2004 Character Color: White Backlight: Blue Supply voltage: 5V Dimensions(L x W x H) mm: 98 x 60 x 12
BDT 443
BDT 443 tax incl.
BDT 443 tax excl.
BDT 443 tax excl.
BDT 443 tax incl.
BDT 443 tax incl.
BDT 0 Tax
BDT 443 tax excl.
BDT 443 tax excl.
BDT 0 Tax
BDT 443 tax incl.
More 20x4 Character LCD Blue Backlight
In-Stock
In stock: 79
- BDT 16 Reduced price RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)
Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz
BDT 175 BDT 191
BDT 191 BDT 175 tax incl.
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax incl.
BDT 191 BDT 175 tax incl.
BDT 0 BDT 0 Tax
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax excl.
BDT 0 BDT 0 Tax
BDT 191 BDT 175 tax incl.
More RC522 RFID Card Reader Module Kit Android NFC supported
In-Stock
In stock: 66
- BDT 171 Reduced price PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit Robotics Bangladesh

Reference: RBD-0346

PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 419 BDT 590
BDT 590 BDT 419 tax incl.
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax incl.
BDT 590 BDT 419 tax incl.
BDT 0 BDT 0 Tax
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax excl.
BDT 0 BDT 0 Tax
BDT 590 BDT 419 tax incl.
More PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit
In-Stock
In stock: 19
MIFARE Classic 1K RFID NFC Smart Card 13. MIFARE Classic 1K RFID NFC Smart Card 13.

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

(0)
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
BDT 32
BDT 32 tax incl.
BDT 32 tax excl.
BDT 32 tax excl.
BDT 32 tax incl.
BDT 32 tax incl.
BDT 0 Tax
BDT 32 tax excl.
BDT 32 tax excl.
BDT 0 Tax
BDT 32 tax incl.
More MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable
In-Stock
In stock: 3842
You might also like
Sold-out Anycubic I3 Mega S 3D Printer Robotics Bangladesh Anycubic I3 Mega S 3D Printer Robotics Bangladesh

Reference: 1265

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 38,999
BDT 38,999 tax incl.
BDT 38,999 tax excl.
BDT 38,999 tax excl.
BDT 38,999 tax incl.
BDT 38,999 tax incl.
BDT 0 Tax
BDT 38,999 tax excl.
BDT 38,999 tax excl.
BDT 0 Tax
BDT 38,999 tax incl.
More Anycubic I3 Mega S 3D Printer
Sold-out
In stock: 0
Sold-out Colored UV Resin 500mL Black Robotics Bangladesh

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990
BDT 2,990 tax incl.
BDT 2,990 tax excl.
BDT 2,990 tax excl.
BDT 2,990 tax incl.
BDT 2,990 tax incl.
BDT 0 Tax
BDT 2,990 tax excl.
BDT 2,990 tax excl.
BDT 0 Tax
BDT 2,990 tax incl.
More Colored UV Resin 500mL Black
Sold-out
In stock: 0
Sold-out Creality CR-10 Smart 3D Printer Robotics Bangladesh Creality CR-10 Smart 3D Printer Robotics Bangladesh

Reference: RBD-1733

Brand: Creality Official

Creality CR-10 Smart 3D Printer

(0)
Built-in WIFI function: Remote control printing anytime, anywhere; A Bit More Intelligence Ultra-silent Design: 32 Bit Mute Board and Mute Fan Design; Intelligent Auto-leveling: V2.0 Auto leveling way, is the same with CR-6 SE. Screen Protection & Auto-shutdown;. Safe and worry-free save energy and power. 6-steps to assemble 8 minutes to complete,...
BDT 72,990
BDT 72,990 tax incl.
BDT 72,990 tax excl.
BDT 72,990 tax excl.
BDT 72,990 tax incl.
BDT 72,990 tax incl.
BDT 0 Tax
BDT 72,990 tax excl.
BDT 72,990 tax excl.
BDT 0 Tax
BDT 72,990 tax incl.
More Creality CR-10 Smart 3D Printer
Sold-out
In stock: -1
Sold-out Creality CR-6 SE Leveling-free DIY 3D Printer Kit Robotics Bangladesh Creality CR-6 SE Leveling-free DIY 3D Printer Kit Robotics Bangladesh

Reference: 1404

Brand: Creality Official

Creality CR-6 SE Leveling-free DIY 3D Printer Kit

(0)
Modeling Technology: FDM（Fused Deposition Modeling） File Formats: STL/OBJ/AMF Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D Print Speed: 80-100mm/s Resume Print Function: Yes Printing Size: 235x235x250mm
BDT 49,990
BDT 49,990 tax incl.
BDT 49,990 tax excl.
BDT 49,990 tax excl.
BDT 49,990 tax incl.
BDT 49,990 tax incl.
BDT 0 Tax
BDT 49,990 tax excl.
BDT 49,990 tax excl.
BDT 0 Tax
BDT 49,990 tax incl.
More Creality CR-6 SE Leveling-free DIY 3D Printer Kit
Sold-out
In stock: 0
Sold-out Creality Ender-3 V2 3D Printer Robotics Bangladesh Creality Ender-3 V2 3D Printer Robotics Bangladesh

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

(0)
Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here
BDT 43,950
BDT 43,950 tax incl.
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 43,950 tax incl.
BDT 43,950 tax incl.
BDT 0 Tax
BDT 43,950 tax excl.
BDT 43,950 tax excl.
BDT 0 Tax
BDT 43,950 tax incl.
More Creality Ender-3 V2 3D Printer
Sold-out
In stock: 0
Sold-out HELLO3D PLA 3D Printer Filament 1. HELLO3D PLA 3D Printer Filament 1.

Reference: RBD-1315

HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650
BDT 2,650 tax incl.
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 2,650 tax incl.
BDT 2,650 tax incl.
BDT 0 Tax
BDT 2,650 tax excl.
BDT 2,650 tax excl.
BDT 0 Tax
BDT 2,650 tax incl.
More HELLO3D PLA 3D Printer Filament 1.75mm 1kg-Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Flexible TPU Filament Plastic For 3D Printer 1. Flexible TPU Filament Plastic For 3D Printer 1.

Reference: RBD-1391

Sunlu Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,910
BDT 3,910 tax incl.
BDT 3,910 tax excl.
BDT 3,910 tax excl.
BDT 3,910 tax incl.
BDT 3,910 tax incl.
BDT 0 Tax
BDT 3,910 tax excl.
BDT 3,910 tax excl.
BDT 0 Tax
BDT 3,910 tax incl.
More Sunlu Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll
Last items in stock
In stock: 1
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White
Sold-out TPU Filament Plastic For 3D Printer 1. TPU Filament Plastic For 3D Printer 1.

Reference: RBD-1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300
BDT 2,300 tax incl.
BDT 2,300 tax excl.
BDT 2,300 tax excl.
BDT 2,300 tax incl.
BDT 2,300 tax incl.
BDT 0 Tax
BDT 2,300 tax excl.
BDT 2,300 tax excl.
BDT 0 Tax
BDT 2,300 tax incl.
More TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll
Sold-out
In stock: 0
Yellow Red Black Blue Gray Cyan Orange Green Red Copper White

Follow us on Facebook

Facebook