A water level indicator is a system that relays information back to a control panel to indicate whether a body of water has a high or low water level.
The Water Level Sensor is an easy-to-use and cost-effective with high level/drop recognition sensor by having a series of parallel wires exposed traces measure droplets/water volume in order to determine the water level.Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
Note: PCB might be different from the picture as per stock
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
Pinout
- IN (Signal) is an analog output pin that will be connected to one of your Arduino’s analog inputs.
- + (VCC) pin provides power to the sensor. It is recommended that the sensor be powered from 3.3V to 5V. Please keep in mind that the analog output will vary depending on the voltage supplied to the sensor.
- – (GND) is the ground pin.
Features:
- EASY to install
- Low maintenance.
- Compact elegant design.
- Gold coated
- It Save electricity and water.
- Consume very little energy,
- Ideal for continuous operations
- Show clear indication of water levels.
| General Specification |
| Operating Voltage (VDC) | 3 ~ 5 |
| Max. Operating Current (mA) | 1-19 |
| Detecting Range | 40×16 mm |
| Operating Temperature (°C) | -10 to 30 |
| Humidity Range | 10% -90% non-condensing |
| Length (mm) | 60 |
| Width (mm) | 20 |
| Height (mm) | 1.5 |
| Weight (gm) | 4 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 12 × 8 × 3 cm |
Please allow 5% measuring deviation due to manual measurement.
Documentation:
- How Water Level Sensor Works and Interface it with Arduino(Lastminuteengineers)
Package Includes:
1 x Water Level Sensor Gold Coating
