Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 46,000.00

Categories

Categories

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 4,000 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Communication Module
  • Categories: Components
  • Categories: Enclosure
  • Categories: Instruments
  • Condition: New

Reference: RBD-0439

Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

(0)
Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Modulation Mode: GFSK (Gaussian Frequency Shift Keying) Transmitting Power: ≤4dBm Sensitivity: ≤-84dBm at 0.1% BER It’s easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baud rate....
BDT 470.00
BDT 470.00 tax incl.
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 470.00 tax incl.
BDT 470.00 tax incl.
BDT 0.00 Tax
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 0.00 Tax
BDT 470.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0121

LED - SMD RGB HL5011 (Pack of 5)

(0)
BDT 10.00
BDT 10.00 tax incl.
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 10.00 tax incl.
BDT 10.00 tax incl.
BDT 0.00 Tax
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 0.00 Tax
BDT 10.00 tax incl.
More
In-Stock
In stock: 1442

Reference: RBD-0319

K Type Thermocouple Sensor Probe for Temperature Controller

(0)
Type K Type.  Mounting thread: M6  Temperature Range:0-600°C. RoboticsBD
BDT 300.00
BDT 300.00 tax incl.
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 300.00 tax incl.
BDT 300.00 tax incl.
BDT 0.00 Tax
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 0.00 Tax
BDT 300.00 tax incl.
More
In-Stock
In stock: 113

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0195

Brand: RoboticsBD

25mW Infrared Line Laser Light

(0)
25mW Infrared Line Laser Light
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-stock
In stock: 22

Reference: RBD-0040

Arduino Bluetooth Module HC-06

(0)
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
BDT 315.00
BDT 315.00 tax incl.
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 315.00 tax incl.
BDT 315.00 tax incl.
BDT 0.00 Tax
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 0.00 Tax
BDT 315.00 tax incl.
More
In-Stock
In stock: 306

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7

Reference: RBD-0383

ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier

(0)
Wide Supply Range: 2.0v To 5.5v Low Current Consumption Continuous Mode: Only 150µa Single-shot Auto Shut-down Programmable Data Rate: 8SPS to 860SPS It has Internal low-drift voltage reference
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0208

Off-Road Wheels - 130x60mm (Pair)

(0)
"Take on any terrain with our burly off-road wheels." "Get the grip and stability you need with our deep-treaded tires." "Easy-to-mount and built to last - our off-road wheels won't let you down."
BDT 1,450.00
BDT 1,450.00 tax incl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax incl.
BDT 1,450.00 tax incl.
BDT 0.00 Tax
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 0.00 Tax
BDT 1,450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2159

Thermoelectric Peltier Refrigeration Cooling System DIY Kit

(0)
Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work. Small volume, does not occupy space, installation is simple. It can be used as a Pet Air Conditioner (chicken, little dog, etc.) or a little fridge. Lightweight, small size and easier to install. The kit does not include...
BDT 1,190.00
BDT 1,190.00 tax incl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax incl.
BDT 1,190.00 tax incl.
BDT 0.00 Tax
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 0.00 Tax
BDT 1,190.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-0345

ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

(0)
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
In-Stock
In stock: 388

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387

Reference: RBD-0396

Ultrasonic Transducer Waterproof Distance Measuring Sensor Module

(0)
Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions Small size, easy to use Operating Voltage: 5 V Sonar Sensing Range: 25-450 cm Max. Sensing Range: 450 cm Frequency: 40 KHz. RoboticsBD
BDT 615.00
BDT 615.00 tax incl.
BDT 615.00 tax excl.
BDT 615.00 tax excl.
BDT 615.00 tax incl.
BDT 615.00 tax incl.
BDT 0.00 Tax
BDT 615.00 tax excl.
BDT 615.00 tax excl.
BDT 0.00 Tax
BDT 615.00 tax incl.
More
In-Stock
In stock: 34

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0226

Brand: SparkFun Electronics

Camera Module - pcDuino V3 (2MP)

(0)
Camera Module - pcDuino V3 (2MP)
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0103

M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module

(0)
This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01...
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 102

Reference: RBD-0706

UNI-T A12T Temperature Humidity Meter

(0)
Dual temperature measurement. RoboticsBD Clock function: 12/24 hour modes  Alarm clock: Rings up to 60s   Comfort level: comfortable, wet, dry
BDT 2,100.00
BDT 2,100.00 tax incl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax incl.
BDT 2,100.00 tax incl.
BDT 0.00 Tax
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 0.00 Tax
BDT 2,100.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-0709

UNI-T UT890D+ Digital Multimeter

(0)
6000 Counts True RMS voltage and current measurements Capacitance, Resistance, Buzzer, Diode
BDT 2,600.00 BDT 2,995.00
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 2,995.00 BDT 2,600.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0440

HC-12 433Mhz Wireless Serial Transceiver Module - 1 Kilometer

(0)
433MHz operation Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA). 10dBm output power and high sensitivity providing long range in the open environment. 3V-6V operating voltage. Serial pass-through mode to replace the serial cable (half duplex). IO pass-through modes. RoboticsBD
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 24

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)
Choose your desire Resistor value from below: 
BDT 5.00
BDT 5.00 tax incl.
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 5.00 tax incl.
BDT 5.00 tax incl.
BDT 0.00 Tax
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 0.00 Tax
BDT 5.00 tax incl.
More
In-Stock
In stock: 614

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0711

UNI-T UT61A Digital Multimeter

(0)
Auto range MAX/MIN/REL mode Auto power off LCD backlight Analog bar graph
BDT 4,100.00 BDT 4,300.00
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 4,300.00 BDT 4,100.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0560

MAX485 RS-485 Module TTL to RS-485 module for Arduino

(0)
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. A low power consumption for the RS-485 communication Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. Slew-rate limited transceiver All pins of the chip have been lead to can be controlled through the...
BDT 399.00
BDT 399.00 tax incl.
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 399.00 tax incl.
BDT 399.00 tax incl.
BDT 0.00 Tax
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 0.00 Tax
BDT 399.00 tax incl.
More
Sold-out
In stock: -1

Reference: RBD-0264

Brand: SparkFun Electronics

Lockitron Mechanical Assembly

(0)
Lockitron Mechanical Assembly The Lockitron Mechanical Assembly from SparkFun is a perfect solution for the DIY home automation or Internet of Things (IoT) enthusiast, whether you want to make your life easier by not awkwardly fumbling with keys or add some extra security in your home with three-factor authentication.
BDT 6,000.00
BDT 6,000.00 tax incl.
BDT 6,000.00 tax excl.
BDT 6,000.00 tax excl.
BDT 6,000.00 tax incl.
BDT 6,000.00 tax incl.
BDT 0.00 Tax
BDT 6,000.00 tax excl.
BDT 6,000.00 tax excl.
BDT 0.00 Tax
BDT 6,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Follow us on Facebook