Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 1,600,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Arduino Boards
  • Categories: Arduino Shield & Module
  • Categories: Components
  • Categories: Raspberry Pi
  • Categories: Robots

Reference: RBD-2383

Thermoelectric Cooler Peltier Module TEC1-12710

(0)
Model number: TEC1-12710 Operating Voltage: 12V Maximum Voltage- Umax (V) : 15V Maximum Current- Imax (A) : 10A Maximum Power : 120 W Power Cord: 25 cm.
BDT 559.00
BDT 559.00 tax incl.
BDT 559.00 tax excl.
BDT 559.00 tax excl.
BDT 559.00 tax incl.
BDT 559.00 tax incl.
BDT 0.00 Tax
BDT 559.00 tax excl.
BDT 559.00 tax excl.
BDT 0.00 Tax
BDT 559.00 tax incl.
More
In stock
In stock: 17

Reference: RBD-2296

15KV High Frequency DC High Voltage Arc Ignition Generator Inverter Boost Step-Up DIY Kit

(0)
Features:This product is a booster coil production suite, the circuit is simple and reliable, with professional line drawings, electronic research convenience enthusiastsUses: high school science experiment, electronic equipment, negative ion generator, scientific small production. This circuit is generated when the stable high-frequency arc, elevated...
BDT 320.00
BDT 320.00 tax incl.
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 320.00 tax incl.
BDT 320.00 tax incl.
BDT 0.00 Tax
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 0.00 Tax
BDT 320.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-2300

Soil Sensor RS485 5 Pin PH NPK Storage Temperature And Humidity EC Sensor Conductivity Tester Multi Parameter

(0)
This product has stable performance, high sensitivity, fast response, stable output, and is suitable for various soil qualities . It is an important tool for observing and studying the occurrence, evolution, improvement and water-salt dynamics of saline soil. By measuring the dielectric constant of soil, it can directly and stably reflect the real...
BDT 15,280.00
BDT 15,280.00 tax incl.
BDT 15,280.00 tax excl.
BDT 15,280.00 tax excl.
BDT 15,280.00 tax incl.
BDT 15,280.00 tax incl.
BDT 0.00 Tax
BDT 15,280.00 tax excl.
BDT 15,280.00 tax excl.
BDT 0.00 Tax
BDT 15,280.00 tax incl.
More
In stock
In stock: 8

Reference: RBD-2301

Active Buzzer Module

(0)
An Active Buzzer Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric.it is a 3.3V-5V DC Electronic Part Active Buzzer Module. This active buzzer rings out as long as it is electrified. Compared with a passive buzzer, it is a bit expensive but easier to control. Typical uses of buzzers include...
BDT 49.00
BDT 49.00 tax incl.
BDT 49.00 tax excl.
BDT 49.00 tax excl.
BDT 49.00 tax incl.
BDT 49.00 tax incl.
BDT 0.00 Tax
BDT 49.00 tax excl.
BDT 49.00 tax excl.
BDT 0.00 Tax
BDT 49.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-2476

Breadboard-friendly SPDT Slide Switch 0.1"/ 2.54mm Spacing

(0)
These nice switches are perfect for use with breadboard and perfboard projects. They have 0.1" spacing and snap in nicely into a solderless breadboard. They're easy to switch no matter what size fingers you have, but not so easy that they'll get flipped by accident. Work great as on/off switches or selector switches, the middle pin is connected to either...
BDT 18.00
BDT 18.00 tax incl.
BDT 18.00 tax excl.
BDT 18.00 tax excl.
BDT 18.00 tax incl.
BDT 18.00 tax incl.
BDT 0.00 Tax
BDT 18.00 tax excl.
BDT 18.00 tax excl.
BDT 0.00 Tax
BDT 18.00 tax incl.
More
In stock
In stock: 1979

Reference: RBD-2302

PCA9548A I2C 8 Channel Multiple Extensions Development Board

(0)
Low Standby Current. 1-to-8 Bidirectional Translating Switches. I2C Bus and SMBus Compatible. 5-V Tolerant Inputs. Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II. Note : Product may vary in two variants TCA9548A &  PCA9548A
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In stock
In stock: 17

Reference: RBD-2511

N-channel power MOSFET - 30V / 60A IRLB8721

(0)
Switching a lot of power? N-channel power MOSFET - 30V / 60A  IRLB8721 MOSFETs are just what you need.These TO-220 package power MOSFETs can switch 30V/60A, which is plenty for most makers! They fit straight into a breadboard or even your own PCB with 2.54mm spaced pads.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 24

Reference: RBD-2304

WS2812B RGB LED 24 Bit Ring

(0)
This is the 24 LED NeoPixel Ring, a small chainable 86mm outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5 V.
BDT 310.00
BDT 310.00 tax incl.
BDT 310.00 tax excl.
BDT 310.00 tax excl.
BDT 310.00 tax incl.
BDT 310.00 tax incl.
BDT 0.00 Tax
BDT 310.00 tax excl.
BDT 310.00 tax excl.
BDT 0.00 Tax
BDT 310.00 tax incl.
More
In stock
In stock: 25

Reference: RBD-2536

Active Buzzer 12V

(0)
Small PCB mountable 12V active electromagnetic buzzer Great for adding audio alert to electronic designs Operates on 12V supply Uses a coil element to generate an audible tone
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 118

Reference: RBD-2305

WS2812B RGB LED 8 Bit Ring

(0)
This is the 8 LED NeoPixel Ring, a small chainable 32mm outer diameter board equipped with 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5 V.
BDT 170.00
BDT 170.00 tax incl.
BDT 170.00 tax excl.
BDT 170.00 tax excl.
BDT 170.00 tax incl.
BDT 170.00 tax incl.
BDT 0.00 Tax
BDT 170.00 tax excl.
BDT 170.00 tax excl.
BDT 0.00 Tax
BDT 170.00 tax incl.
More
In stock
In stock: 31

Reference: RBD-2537

1207 Passive Buzzer

(0)
Passive buzzer that requires an electrical signal (PWM) to operate Can be used with the Tone() command on Arduino Compact and lightweight design Easy to use
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
In-Stock
In stock: 124

Reference: RBD-2306

WS2812B RGB LED 12 Bit Ring

(0)
The 12 Bit RGB LED Ring Module with Integrated Drivers – WS2812B can be used in colourful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effects. There is a single data line with a very timing-specific protocol. It has trichromatic colour for each pixel and can complete 16,777,216 colours of all true colour displays, the...
BDT 275.00
BDT 275.00 tax incl.
BDT 275.00 tax excl.
BDT 275.00 tax excl.
BDT 275.00 tax incl.
BDT 275.00 tax incl.
BDT 0.00 Tax
BDT 275.00 tax excl.
BDT 275.00 tax excl.
BDT 0.00 Tax
BDT 275.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-2308

DC 3V-36V 15A Dual H-Bridge DC Motor Driver

(0)
This Dual Dc motor driver focuses on high efficiency and can withstand high current load, the maximum current up to 30A. 
BDT 1,650.00
BDT 1,650.00 tax incl.
BDT 1,650.00 tax excl.
BDT 1,650.00 tax excl.
BDT 1,650.00 tax incl.
BDT 1,650.00 tax incl.
BDT 0.00 Tax
BDT 1,650.00 tax excl.
BDT 1,650.00 tax excl.
BDT 0.00 Tax
BDT 1,650.00 tax incl.
More
In stock
In stock: 16

Reference: RBD-2614

P-Channel MOSFET 55V 31A IRF5305

(0)
If you've ever wondered how to control the headlight of a car from a microcontroller, a MOSFET is what you need. The IRF5305 is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with most 5V microcontroller or mechanical switches. This allows you to control high-power devices with very low-power...
BDT 140.00
BDT 140.00 tax incl.
BDT 140.00 tax excl.
BDT 140.00 tax excl.
BDT 140.00 tax incl.
BDT 140.00 tax incl.
BDT 0.00 Tax
BDT 140.00 tax excl.
BDT 140.00 tax excl.
BDT 0.00 Tax
BDT 140.00 tax incl.
More
In stock
In stock: 140

Reference: RBD-2312

WS2812 RGB 4X4 Display

(0)
When it comes to adding colour to an electronics projects, these 4x4 NeoPixel Squares use WS2812 Addressable RGB LED’s to display up to 16777216 different colour combinations, with simple operations and built-in features to greatly enhance functionality. This makes them ideal as LED Displays for basic to intermediate Electronics projects, and despite...
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-2314

8-bit WS2812B 5050 RGB LED Built-in Full Color Driver Development Board Straight

(0)
8-bit WS2812B 5050 RGB LED Built-in Full Color Driver Development Board (Straight) is a great collection of WS2812B RGB Addressable LED Modules in a straight PCB. WS2812B is an intelligent LED that includes the photo diode and an addressable controller chip both are available and integrated into a single 5050 Components package. The major advantages of...
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 25

Reference: RBD-2748

Reset / Enable Controller - KA75330 3.3V Voltage Detector

(0)
A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a Feather Huzzah running on a lipoly battery every few minutes. Eventually, the battery runs down and goes below 3.3V, so the voltage to the ESP8266 core is too low, and could cause a lockup or corrupted data....
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In stock
In stock: 100

Reference: RBD-2307

Stereo Enclosed Speaker 3W 8Ω

(0)
This speaker is a great addition to any audio project where you need 8 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is ~2.0mm...
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-2749

TIP120 Power Darlington Transistors

(0)
Transistors are powerful little electronic switches, and when little NPN transistors aren't powerful enough for your project, use these beefy TIP120 Darlington transistors. Great for whenever you need to control medium to high-power electronics such as motors, solenoids, or 1W+ LEDs. We find them so handy, they come in a pack of 3! Each transistor is a...
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In stock
In stock: 50

Reference: RBD-2316

CJMCU-4051 74HC4051 8 Channel Analog Multiplexer/Demultiplexer Breakout Board for Arduino

(0)
1.Wide Analog Input Voltage Range: +/-5V2.Low “ON” Resistance: 80 ohm (type) at Vcc = 4.5V; 70 ohm (type) at Vcc = 6.0V; 60 ohm (type) at Vcc = 9.0V3.Logic Level Translation: to enable 5V to communicate with +/-5V analog signals4.Board Size: 30 x 19 mm
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-2750

N-Channel MOSFET 55V 30A IRLZ34N

(0)
This is a common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 3-5V microcontroller or mechanical switch. This allows you to control high-power devices with very low-power control mechanisms.
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In stock
In stock: 48

Reference: RBD-2317

5-way Tactile Navigation Switch

(0)
The  is a 4 way navigation switch (north, south, east, west) with a center push. Think of it as a mini joystick. Whilst the pins don’t align perfectly to a 2.54mm grid, it can be made to fit into a breadboard or perfboard by bending the pins.
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-2751

3.3V 800mA Linear Voltage Regulator - LD1117-3.3 TO-220

(0)
Ah the esteemed LD1117, who amongst us has not used this popular low drop voltage regulator? This big chunky regulator will help you get your 4-15V battery or wall adapter down to a nice clean 3.3V with 1% regulation. Perfect for just about all electronics!  This is the TO-220 version, with up to 800mA current capability, and has internal current limiting...
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In stock
In stock: 99

Reference: RBD-2318

Sound Output Module Speaker Module Microphone Sensor Module Sound Sensor for Arduino

(0)
The Speaker module is composed of a power amplifier and a loudspeaker. Sound size can be adjusted by the potentiometer on the circuit board. Enter different frequencies, the speakers produce different tones. Can be carried out by for Arduino encoding and DIY their music box!Product data interfaceusing anti plug,the two sides of the interface are...
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-2755

P-channel Power MOSFET TO-220 Package 25A / 60V FQP27P06

(0)
When you need to switch a lot of power, P channel MOSFETs are best for the job. These P-FETs can switch over 60V and 25A (with proper heat-sinking) and are TO-220 package so they fit nicely into any breadboard or perfboard. Heat sinking is easy with TO-220s, but because of the very low Rds(on) of down to 70 mOhms (depending on the Vgs - check the...
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In stock
In stock: 50

Reference: RBD-2323

NeoPixel 5050 WS2812B 1Bit RGB LED with Integrated Driver

(0)
The WS2812B RGB LED Module is a small module with BIG color.  The module has a special LED on board that contains three separate LEDs – red, green, and blue – as well as a smart control IC that can individually drive each LED.  Each color has 256 intensity levels which allows the module to produce 24-bit color, or more than 16 million colors.  Each module...
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In stock
In stock: 60

Reference: RBD-2326

Brand: DFRobot

Gravity Analog Heart Rate Monitor Sensor (ECG) for Arduino

(0)
The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip which will generate a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter"...
BDT 2,810.00
BDT 2,810.00 tax incl.
BDT 2,810.00 tax excl.
BDT 2,810.00 tax excl.
BDT 2,810.00 tax incl.
BDT 2,810.00 tax incl.
BDT 0.00 Tax
BDT 2,810.00 tax excl.
BDT 2,810.00 tax excl.
BDT 0.00 Tax
BDT 2,810.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2795

W203 Through Hole Trimmer Potentiometer Variable Trim Pot Resistor 20 kOhms

(0)
Resistance: 20k Ohm Tolerance: 10 % Temperature coefficient: ±100 ppm/ºC Operating temperature range: -55ºC to +125ºC Mounting type: Through-hole
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 200

Reference: RBD-2327

Brand: DFRobot

Self-powered Wireless Switch 433Mhz

(0)
In life, remote controllers can be seen everywhere, and most of them are inseparable from the battery. However, we often encounter problems when using the battery, for instance, it is troublesome to replace the battery, batteries are easy to corrode in a humid environment, or the waste batteries may cause serious environmental pollution. Do you know that...
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-2796

W101 Through Hole Trimmer Potentiometer Variable Trim Pot Resistor 100 Ohms

(0)
Resistance: 100 Ohm Tolerance: 10 % Temperature coefficient: ±100 ppm/ºC Operating temperature range: -55ºC to +125ºC Mounting type: Through-hole
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 198

Reference: RBD-2328

SIM A7670C R2 4G LTE GSM Module Compatible with STM32 Raspberry Pi

(0)
The A7670 series is the LTE Cat 1 module that supports wireless communication modes of LTE-TDD/LTE-FDD/GSM/GPRS/EDGE. It supports a maximum 10Mbps downlink rate and a 5Mbps uplink rate. The A7670 series supports multiple built-in network protocols, which are suitable for main IOT applications such as telematics, surveillance devices, POS, industrial...
BDT 3,350.00
BDT 3,350.00 tax incl.
BDT 3,350.00 tax excl.
BDT 3,350.00 tax excl.
BDT 3,350.00 tax incl.
BDT 3,350.00 tax incl.
BDT 0.00 Tax
BDT 3,350.00 tax excl.
BDT 3,350.00 tax excl.
BDT 0.00 Tax
BDT 3,350.00 tax incl.
More
In stock
In stock: 6

Reference: RBD-2331

Rotary Potentiometer Analog Knobs 8 Channel Module

(0)
This is a rotary potentiometer module consisting of 8 adjustable potentiometers and the communication method is IIC interface. The module mainly uses 10K adjustable resistors. By rotating the potentiometer to change the size of the resistance value, then build a circuit to convert the change of resistance value to voltage change, read the output value...
BDT 640.00
BDT 640.00 tax incl.
BDT 640.00 tax excl.
BDT 640.00 tax excl.
BDT 640.00 tax incl.
BDT 640.00 tax incl.
BDT 0.00 Tax
BDT 640.00 tax excl.
BDT 640.00 tax excl.
BDT 0.00 Tax
BDT 640.00 tax incl.
More
In stock
In stock: 20

Follow us on Facebook