
Reference: RBD-2456
Banner
The WS2812B RGB LED Module is a small module with BIG color. The module has a special LED on board that contains three separate LEDs – red, green, and blue – as well as a smart control IC that can individually drive each LED. Each color has 256 intensity levels which allows the module to produce 24-bit color, or more than 16 million colors. Each module is instructed by using a special serial protocol. This protocol allows many modules to be daisy-chained together so that one microcontroller can control the whole lot – with a single data signal. Any number of these modules can be chained together by connecting one module’s data-out (DO) pin to another’s data-in (DI) pin.
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Size: 14mm x 12mm Chip: WS2812B (with built-in LED) LED: RGB full-color 5050 package highlight Voltage: 5V Port: Multiple ports available Platform: Compatible with Arduino, 51, stm32, and other microcontrollers
This product features bright 5050 LEDs with a built-in control chip that only requires one IO port to control multiple LEDs. The chip also has a built-in shaping circuit to prevent signal distortion, ensuring stable display performance. The three-color LED allows for 256-level brightness adjustments, resulting in a true-color display effect of up to 160,000 colors, with a scanning frequency of no less than 400Hz/S.
The serial connection level interface allows for data reception and decoding through a single signal line. In low-speed cascading mode, when the refresh rate is 30 frames per second, the number of consecutive stages is not less than 512 points. The data sending and receiving speed can reach up to 800Kbps.
This product features high brightness LEDs with a high consistency of light color and brightness. Additionally, there are connecting ports at both ends that can be directly plugged in.
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RBD-2456
Reference: RBD-2230
Reference: RBD-0438
Reference: RBD-0576
Reference: RBD-2114
Reference: RBD-2552
Reference: RBD-2219
Reference: RBD-2142
Reference: RBD-2658
Reference: RBD-2238
Reference: RBD-2736
Reference: RBD-1219
Reference: RBD-2225
Reference: RBD-2409
Reference: RBD-2134
Reference: RBD-0392
The WS2812B RGB LED Module is a small module with BIG color. The module has a special LED on board that contains three separate LEDs – red, green, and blue – as well as a smart control IC that can individually drive each LED. Each color has 256 intensity levels which allows the module to produce 24-bit color, or more than 16 million colors. Each module is instructed by using a special serial protocol. This protocol allows many modules to be daisy-chained together so that one microcontroller can control the whole lot – with a single data signal. Any number of these modules can be chained together by connecting one module’s data-out (DO) pin to another’s data-in (DI) pin.
check_circle
check_circle