Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 1,600,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 4,000 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Components
  • Categories: Learning Kit
  • Categories: Programmer
  • Categories: Raspberry Pi
  • Categories: Robotics Parts
  • Categories: Robots

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-2386

Brand: Raspberry Pi Official

Raspberry Pi Pico W

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,449.00
BDT 1,449.00 tax incl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax incl.
BDT 1,449.00 tax incl.
BDT 0.00 Tax
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 0.00 Tax
BDT 1,449.00 tax incl.
More
In stock
In stock: 117

Reference: RBD-2160

1 Meter Micro USB Cable for Arduino, Node MCU and Flight Controllers

(0)
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 54

Reference: RBD-0717

65mm Rubber Wheel with 37GB Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire. RoboticsBD
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-0371

NAO V5 STANDARD EDITION

(0)
The result of a unique combination of mechanical engineering and software, NAO is a character made up of a multitude of sensors, motors and software piloted by a made- to -measure operating system: NAOqi OS. The pack includes: One NAO V5 (red or blue) 1 Charger and 1 battery 2 years of warranty 1 Choregraphe License Full SDK and API
BDT 1,600,000.00
BDT 1,600,000.00 tax incl.
BDT 1,600,000.00 tax excl.
BDT 1,600,000.00 tax excl.
BDT 1,600,000.00 tax incl.
BDT 1,600,000.00 tax incl.
BDT 0.00 Tax
BDT 1,600,000.00 tax excl.
BDT 1,600,000.00 tax excl.
BDT 0.00 Tax
BDT 1,600,000.00 tax incl.
More
Out-of-Stock
In stock: -3

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-2162

1 Meter Mini USB Cable for Arduino Nano

(0)
USB Type: Type-A to Mini-B Length: 1 meter/ 3.2 Feet Exclusively designed for Arduino boards.  Compatible with Arduino Nano Larger Cable
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1664

Brand: RoboticsBD

OTTO Programmable Robot Kit DIY

(0)
Open Source Design Compatible With Arduino IDE DIY Kit Easy to Assemble This is the DIY Kit, It comes with no coding, if you want Complete OTTO bot click here.
BDT 6,999.00
BDT 6,999.00 tax incl.
BDT 6,999.00 tax excl.
BDT 6,999.00 tax excl.
BDT 6,999.00 tax incl.
BDT 6,999.00 tax incl.
BDT 0.00 Tax
BDT 6,999.00 tax excl.
BDT 6,999.00 tax excl.
BDT 0.00 Tax
BDT 6,999.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1599

Brand: Raspberry Pi Official

Raspberry Pi Pico

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
BDT 870.00 BDT 930.00
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax incl.
More
In-Stock
In stock: 116

Reference: RBD-0430

Line Follower Sensor- 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Output format: 8 Analog and Digital voltages. Optimal sensing distance: 0.125″ (3 mm). RoboticsBD
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-0372

BIOLOID Premium Robot Kit

(0)
• Comes with the CM-530 controller and AX-12A servos • Convenient, safe and expandable• All-round robot kit for education/robot competitions/entertainment• Can build various types of robot such as spider, dinosaur, and humanoid
BDT 240,000.00
BDT 240,000.00 tax incl.
BDT 240,000.00 tax excl.
BDT 240,000.00 tax excl.
BDT 240,000.00 tax incl.
BDT 240,000.00 tax incl.
BDT 0.00 Tax
BDT 240,000.00 tax excl.
BDT 240,000.00 tax excl.
BDT 0.00 Tax
BDT 240,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)
Choose your desire Resistor value from below: 
BDT 5.00
BDT 5.00 tax incl.
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 5.00 tax incl.
BDT 5.00 tax incl.
BDT 0.00 Tax
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 0.00 Tax
BDT 5.00 tax incl.
More
In-Stock
In stock: 614

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2012

Brand: Raspberry Pi Official

Raspberry Pi Pico With Soldered Headers

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
BDT 970.00 BDT 1,070.00
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1761

Cable For Arduino UNO/MEGA (USB A to B)-3.2 Feet/1Meter

(0)
USB Type: Type-A to Type-B Weight: 80 gm. Length: 1m / 3.2Feet Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In-Stock
In stock: 67

Reference: RBD-1111

Geiger Counter Kit Nuclear Radiation Detector Gamma Ray Build Radiation Monitoring Station

(0)
This is one open-source Geiger Counter project which could be used to detect nuclear radiation. The schematic and code and other helpful files are listed in this package. All the codes are designed and tested on this kit, these materials are useful for DIY Geiger Counter Kit Nuclear Radiation Detectors or Radiation Monitoring Stations. Note: The kit comes...
BDT 5,890.00
BDT 5,890.00 tax incl.
BDT 5,890.00 tax excl.
BDT 5,890.00 tax excl.
BDT 5,890.00 tax incl.
BDT 5,890.00 tax incl.
BDT 0.00 Tax
BDT 5,890.00 tax excl.
BDT 5,890.00 tax excl.
BDT 0.00 Tax
BDT 5,890.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0659

Digital Line Following Sensor - 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Supply current: 150 mA Output format: 8 Digital voltages. Optimal sensing distance: 3 mm. Maximum recommended sensing distance: 6 mm Uses 8 sensors for best resolution Comes with easy to use digital outputs that can be connected directly to microcontrollers Sample Programming Code is available. RoboticsBD
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0374

RoboBrothers RoboPhilo Humanoid Robot Ready to Walk

(0)
• Available in kit form or ready to walk • 20 degree-of-freedom humanoid robot comes assembled and ready to use • Controlled by a real-time IR remote, built-in actions or user-programmed actions• Includes graphical software interface
BDT 100,000.00
BDT 100,000.00 tax incl.
BDT 100,000.00 tax excl.
BDT 100,000.00 tax excl.
BDT 100,000.00 tax incl.
BDT 100,000.00 tax incl.
BDT 0.00 Tax
BDT 100,000.00 tax excl.
BDT 100,000.00 tax excl.
BDT 0.00 Tax
BDT 100,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2630

BATN Mini Bot - Plug and Play

(0)
Bluetooth Autonomous Tank Nano (BATN) BATN Mini Bot: plug-and-play robot for indoors & outdoors. Obstacle avoidance with ultrasonic range finder. Moves forward, backward, turns with tank tracks. Rechargeable battery for continuous operation. Pre-programmed Arduino Uno R3 brain. Motor control with L298P shield, buzzer, Bluetooth. Easy assembly, modular...
BDT 9,500.00
BDT 9,500.00 tax incl.
BDT 9,500.00 tax excl.
BDT 9,500.00 tax excl.
BDT 9,500.00 tax incl.
BDT 9,500.00 tax incl.
BDT 0.00 Tax
BDT 9,500.00 tax excl.
BDT 9,500.00 tax excl.
BDT 0.00 Tax
BDT 9,500.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2195

50 cm Micro USB Cable for Arduino Leonardo and Node MCU

(0)
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 185

Reference: RBD-1734

Dual GPIO Expander for Raspberry Pi Pico, Two Sets of Male Headers

(0)
Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic *Please make sure there are no pin conflicts between the modules you want to use together before connecting. Raspberry Pi Pico and...
BDT 1,040.00
BDT 1,040.00 tax incl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax incl.
BDT 1,040.00 tax incl.
BDT 0.00 Tax
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 0.00 Tax
BDT 1,040.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-0326

4WD Smart Robot Chassis Kit

(0)
Very handy and simple in assembling/disassembling. RoboticsBD Strong components so as to withstand extreme terrain conditions. Transparent Car Chassis. Attractive design. RoboticsBD
BDT 1,090.00
BDT 1,090.00 tax incl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax incl.
BDT 1,090.00 tax incl.
BDT 0.00 Tax
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 0.00 Tax
BDT 1,090.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2631

Brand: RoboticsBD

SteerEase Bluetooth Control Robot - Plug and Play

(0)
Effortless control: Steer your robot using the intuitive Bluetooth app. Versatility through Arduino: Endless customization and programming possibilities. Smart features: Agile chassis, precise motor control, and modular design. Ready to play: Fully functional out of the box for immediate exploration. Perfect for all levels: Ideal for beginners and...
BDT 6,995.00
BDT 6,995.00 tax incl.
BDT 6,995.00 tax excl.
BDT 6,995.00 tax excl.
BDT 6,995.00 tax incl.
BDT 6,995.00 tax incl.
BDT 0.00 Tax
BDT 6,995.00 tax excl.
BDT 6,995.00 tax excl.
BDT 0.00 Tax
BDT 6,995.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2196

50 cm Cable For Arduino UNO/MEGA (USB A to B)

(0)
USB Type: Type-A to Type-B Weight: 26 gm. Length: 50 cm Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 135

Reference: RBD-1971

Brand: DFRobot

Gravity: Expansion Board for Raspberry Pi Pico

(0)
Gravity Expansion Board Designed for Raspberry Pi Pico Compatible with a variety of Gravity sensors and modules. Gravity Expansion Board for Pico All pins brought out, no soldering required Additional Communication Ports: Digital IO, Analog IO, I2C, SPI, UART, GDI Note: The product not include Raspberry Pi Pico. Buy Raspberry Pi Pico here. Buy Raspberry...
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2696

HC-SR04 Ultrasonic Sensor Housing

(0)
Custom 3D-printed enclosure designed specifically for the HC-SR04 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. For convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 85.00
BDT 85.00 tax incl.
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 85.00 tax incl.
BDT 85.00 tax incl.
BDT 0.00 Tax
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 0.00 Tax
BDT 85.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2632

SteerEase Line Following & Obstacle Avoidance Robot - Plug and Play

(0)
Plug-and-Play Simplicity: Get started in minutes with effortless setup and intuitive controls. Bluetooth App Control: Steer your robot and switch modes wirelessly from your smartphone/tablet. Obstacle Avoidance: Navigate obstacles with built-in ultrasonic sensor (avoidance mode). Line Following Mode: Robot autonomously follows pre-defined paths using line...
BDT 5,500.00
BDT 5,500.00 tax incl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax incl.
BDT 5,500.00 tax incl.
BDT 0.00 Tax
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 0.00 Tax
BDT 5,500.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2198

CH341 USB Programmer

(0)
Model: CH341 Series Main Chip: CH341B Dimensions in mm (LxWxH): 85 x 28 x 12 Weight (gm): 20 8-bit parallel in EPP or MEM mode
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 26

Follow us on Facebook