• Banner

Active filters
  • Categories: 3D Printed
  • Categories: Home Automation
  • Categories: Motor Driver
  • Categories: Orange Pi
  • Categories: Raspberry Pi
  • Categories: RFID/ NFC
  • Categories: Solar Panel

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2393

Brand: Raspberry Pi Official

Raspberry Pi Pico W with Soldered Headers

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,549.00
BDT 1,549.00 tax incl.
BDT 1,549.00 tax excl.
BDT 1,549.00 tax excl.
BDT 1,549.00 tax incl.
BDT 1,549.00 tax incl.
BDT 0.00 Tax
BDT 1,549.00 tax excl.
BDT 1,549.00 tax excl.
BDT 0.00 Tax
BDT 1,549.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-1172

Motion Sensor based LED Light Lamp Holder

(0)
Infrared Sensor Automatic Lighting Control Switch with lamp holder; convenient, safe & practical. Good solution for energy saving. You can conveniently let the light auto on/off. The switch can detect the human body's infrared, and use infrared to control the load. Easy to install. Strong anti-interference ability Suitable for corridor, toilet,...
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-2386

Brand: Raspberry Pi Official

Raspberry Pi Pico W

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,449.00
BDT 1,449.00 tax incl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax incl.
BDT 1,449.00 tax incl.
BDT 0.00 Tax
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 0.00 Tax
BDT 1,449.00 tax incl.
More
In stock
In stock: 117

Reference: RBD-1965

LoraTap Tuya Smart ZigBee 3.0 Hub Wireless Multi Mode Mesh Gateway

(0)
LoraTap Tuya Smart ZigBee 3.0 Hub  Simple operation Easy to use Plug and play Using infrared sensor technology method Making your life more fashionable
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

(0)
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-1825

Wireless Baby Sound Monitor Two-way Intercom Night light

(0)
Wireless Baby Sound Monitor Two-way Intercom Night light Baby Unit can be powered with provided power adapter Parent Unit is rechargeable. Night Light. 2 Way Intercom.
BDT 4,290.00
BDT 4,290.00 tax incl.
BDT 4,290.00 tax excl.
BDT 4,290.00 tax excl.
BDT 4,290.00 tax incl.
BDT 4,290.00 tax incl.
BDT 0.00 Tax
BDT 4,290.00 tax excl.
BDT 4,290.00 tax excl.
BDT 0.00 Tax
BDT 4,290.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1599

Brand: Raspberry Pi Official

Raspberry Pi Pico

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
BDT 870.00 BDT 930.00
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax incl.
More
In-Stock
In stock: 116

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)
Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
BDT 670.00
BDT 670.00 tax incl.
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 670.00 tax incl.
BDT 670.00 tax incl.
BDT 0.00 Tax
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 0.00 Tax
BDT 670.00 tax incl.
More
In-Stock
In stock: 44

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2012

Brand: Raspberry Pi Official

Raspberry Pi Pico With Soldered Headers

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
BDT 970.00 BDT 1,070.00
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1942

MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System

(0)
Actuation Distance : 15 – 25 mm; Connecting cable length: 30 cm. Magnetic sensor alarm, control the switch of the circuit via the built-in magnet Alarm when someone intrudes into your places Can be used in places like apartment, hotel, office, etc.
BDT 149.00
BDT 149.00 tax incl.
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 149.00 tax incl.
BDT 149.00 tax incl.
BDT 0.00 Tax
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 0.00 Tax
BDT 149.00 tax incl.
More
In-Stock
In stock: 70

Reference: RBD-1606

L297 Stepper Motor Controller IC

(0)
Supply Voltage Range: 4.75V to 7V Driver Case Style: DIP No. of Pins: 20 Operating Temperature Range: -40°C to +150°C
BDT 96.00
BDT 96.00 tax incl.
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 96.00 tax incl.
BDT 96.00 tax incl.
BDT 0.00 Tax
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 0.00 Tax
BDT 96.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2141

Anti-Corrosion Water Level Sensor with Ball Float Switch

(0)
Rating contract (Max.): 10 W Switching power supply (Max.): 110VDC Resistance contract (Max.): 100 Ω Appro. Float Ball Size (mm) : 24×17 (LxD) Body Total Length (mm) : 85 Cable Length (cm) : 37 Total Float opening: 70° Switch ON/OFF angle Approx. betn 15° to 20°
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 39

Reference: RBD-1734

Dual GPIO Expander for Raspberry Pi Pico, Two Sets of Male Headers

(0)
Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic *Please make sure there are no pin conflicts between the modules you want to use together before connecting. Raspberry Pi Pico and...
BDT 1,040.00
BDT 1,040.00 tax incl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax incl.
BDT 1,040.00 tax incl.
BDT 0.00 Tax
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 0.00 Tax
BDT 1,040.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1971

Brand: DFRobot

Gravity: Expansion Board for Raspberry Pi Pico

(0)
Gravity Expansion Board Designed for Raspberry Pi Pico Compatible with a variety of Gravity sensors and modules. Gravity Expansion Board for Pico All pins brought out, no soldering required Additional Communication Ports: Digital IO, Analog IO, I2C, SPI, UART, GDI Note: The product not include Raspberry Pi Pico. Buy Raspberry Pi Pico here. Buy Raspberry...
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1831

Siemens Logo 6ED1052-1MD08-0BA1 (Model Year: 2023)

(0)
Part No: 6ED1052-1MD08-0BA1 Country of origin: China Condition: Brand New
BDT 18,990.00
BDT 18,990.00 tax incl.
BDT 18,990.00 tax excl.
BDT 18,990.00 tax excl.
BDT 18,990.00 tax incl.
BDT 18,990.00 tax incl.
BDT 0.00 Tax
BDT 18,990.00 tax excl.
BDT 18,990.00 tax excl.
BDT 0.00 Tax
BDT 18,990.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1635

Dual Channel Motor Driver Shield For Arduino

(0)
Logic control, 5V from Arduino main board Polarity protection for External motor power input 2 fast test buttons for each motor channel Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source) Up to 2A current each channel Pin 4, 5,6,7 are used to drive two DC motor Support PWM speed control Support  advance speed control
BDT 1,399.00
BDT 1,399.00 tax incl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax incl.
BDT 1,399.00 tax incl.
BDT 0.00 Tax
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 0.00 Tax
BDT 1,399.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2696

HC-SR04 Ultrasonic Sensor Housing

(0)
Custom 3D-printed enclosure designed specifically for the HC-SR04 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. For convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 85.00
BDT 85.00 tax incl.
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 85.00 tax incl.
BDT 85.00 tax incl.
BDT 0.00 Tax
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 0.00 Tax
BDT 85.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-1724

DC-5V-35V 5A PWM Motor Speed Controller

(0)
Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 74

Reference: RBD-1654

5 In 1 Portable CO2 Detector Air Quality Detector Intelligent Air Detector

(0)
5 In 1 Portable  CO2 Detector Air Quality Detector Intelligent Air Detector Temperature and Humidity Sensor Carbon Dioxide Monitor TVOC Formaldehyde Detection HCHO Detector  Color Black
BDT 3,950.00
BDT 3,950.00 tax incl.
BDT 3,950.00 tax excl.
BDT 3,950.00 tax excl.
BDT 3,950.00 tax incl.
BDT 3,950.00 tax incl.
BDT 0.00 Tax
BDT 3,950.00 tax excl.
BDT 3,950.00 tax excl.
BDT 0.00 Tax
BDT 3,950.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1423

Brand: Raspberry Pi Official

Raspberry Pi High Quality Camera with 6mm Lens

(0)
Sony IMX477R stacked, back-illuminated sensor. Resolution: 12.3 megapixels. Compatible with Raspberry Pi 1/2/3/4 boards Output: RAW12/10/8, COMP8 Back focus: Adjustable (12.5 mm–22.4 mm) Lens standards: C-mount, CS-mount (C-CS adapter included) IR cut filter: Integrated Wide Field of View suitable for CCTV applications Suitable for macro photography...
BDT 16,990.00
BDT 16,990.00 tax incl.
BDT 16,990.00 tax excl.
BDT 16,990.00 tax excl.
BDT 16,990.00 tax incl.
BDT 16,990.00 tax incl.
BDT 0.00 Tax
BDT 16,990.00 tax excl.
BDT 16,990.00 tax excl.
BDT 0.00 Tax
BDT 16,990.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1961

Raspberry Pi Compatible 160° FOV 5MP Fisheye Lens Wide Angle Camera Module

(0)
Wide-angle fish-eye lens Manual Adjustable Focus Field of View Angle: 160° Easy to install and Use Useful for real-time Photography and Videos
BDT 1,490.00
BDT 1,490.00 tax incl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax incl.
BDT 1,490.00 tax incl.
BDT 0.00 Tax
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 0.00 Tax
BDT 1,490.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1810

L293D Shield for NodeMCU V2

(0)
Motor Power Range: 4.5V ~ 36V Control supply range: 4.5V ~ 9V Logical operating current Iss: ≤60mA Driving part of the work current Io: ≤1.2A Maximum power dissipation: 4W (T = 90 ℃) Operating temperature : -25 ℃ ~ + 125 ℃ Drive Type: Dual high-power H-bridge driver
BDT 185.00
BDT 185.00 tax incl.
BDT 185.00 tax excl.
BDT 185.00 tax excl.
BDT 185.00 tax incl.
BDT 185.00 tax incl.
BDT 0.00 Tax
BDT 185.00 tax excl.
BDT 185.00 tax excl.
BDT 0.00 Tax
BDT 185.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-1566

SP108E LED Wifi Magic Controller WS2812B WS2813 LED Strip Light Smart APP Wireless Control Max 2048 Pixels

(0)
Long distance APP remote control via WIFI; Support routing mode (AP) and LAN connection mode (STA); Support almost every kind of one-wire or two-wire LED driver IC; Brightness adjustable, with 180 kinds of patterns and 8 kind of color adjustable patterns;
BDT 1,800.00
BDT 1,800.00 tax incl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax incl.
BDT 1,800.00 tax incl.
BDT 0.00 Tax
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 0.00 Tax
BDT 1,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Follow us on Facebook