Home

  • Banner

Active filters
  • Availability: Not available
  • Categories: 3D Printer
  • Categories: Back in Stock
  • Categories: Connector
  • Categories: Enclosure
  • Categories: Motor Driver
Out-of-Stock Raspberry Pi Case with Fan and Heatsink Quick view

Reference: RBD-0906

Raspberry Pi Case with Fan and Heatsink

(0)
Slot for Cooling Fan Easy to assemble with Nut-Bolts included. RoboticsBD Cut-out for micro SC card at the bottom panel This simple case provides tough protection for your raspberry pi along with access to ports High Quality two-piece injection-molded ABS enclosure Click together design, no screws, standoffs or elastic bands required It is easy to use....
BDT 440.00
BDT 440.00 tax incl.
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 440.00 tax incl.
BDT 440.00 tax incl.
BDT 0.00 Tax
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 0.00 Tax
BDT 440.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Big Easy Driver - Stepper Motor Driver Quick view

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600.00
BDT 1,600.00 tax incl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax incl.
BDT 1,600.00 tax incl.
BDT 0.00 Tax
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 0.00 Tax
BDT 1,600.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Creality CR-10 Smart 3D Printer Robotics Bangladesh Quick view

Reference: RBD-1733

Brand: Creality Official

Creality CR-10 Smart 3D Printer

(0)
Built-in WIFI function: Remote control printing anytime, anywhere; A Bit More Intelligence Ultra-silent Design: 32 Bit Mute Board and Mute Fan Design; Intelligent Auto-leveling: V2.0 Auto leveling way, is the same with CR-6 SE. Screen Protection & Auto-shutdown;. Safe and worry-free save energy and power. 6-steps to assemble 8 minutes to complete,...
BDT 72,990.00
BDT 72,990.00 tax incl.
BDT 72,990.00 tax excl.
BDT 72,990.00 tax excl.
BDT 72,990.00 tax incl.
BDT 72,990.00 tax incl.
BDT 0.00 Tax
BDT 72,990.00 tax excl.
BDT 72,990.00 tax excl.
BDT 0.00 Tax
BDT 72,990.00 tax incl.
More
Out-of-Stock
In stock: -1
Out-of-Stock Creality Ender-3 V2 3D Printer Robotics Bangladesh Quick view

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

(0)
Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here
BDT 43,950.00
BDT 43,950.00 tax incl.
BDT 43,950.00 tax excl.
BDT 43,950.00 tax excl.
BDT 43,950.00 tax incl.
BDT 43,950.00 tax incl.
BDT 0.00 Tax
BDT 43,950.00 tax excl.
BDT 43,950.00 tax excl.
BDT 0.00 Tax
BDT 43,950.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Creality CR-6 SE Leveling-free DIY 3D Printer Kit Robotics Bangladesh Quick view

Reference: 1404

Brand: Creality Official

Creality CR-6 SE Leveling-free DIY 3D Printer Kit

(0)
Modeling Technology: FDM（Fused Deposition Modeling） File Formats: STL/OBJ/AMF Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D Print Speed: 80-100mm/s Resume Print Function: Yes Printing Size: 235x235x250mm
BDT 49,990.00
BDT 49,990.00 tax incl.
BDT 49,990.00 tax excl.
BDT 49,990.00 tax excl.
BDT 49,990.00 tax incl.
BDT 49,990.00 tax incl.
BDT 0.00 Tax
BDT 49,990.00 tax excl.
BDT 49,990.00 tax excl.
BDT 0.00 Tax
BDT 49,990.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Anycubic Photon Zero Resin 3D Printer Robotics Bangladesh Quick view

Reference: 1375

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

(0)
Technique: LCD-based SLA Printing Speed: 30mm(H)/hour Power: 30W
BDT 36,990.00
BDT 36,990.00 tax incl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax incl.
BDT 36,990.00 tax incl.
BDT 0.00 Tax
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 0.00 Tax
BDT 36,990.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: 1316

ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.
BDT 2,895.00
BDT 2,895.00 tax incl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax incl.
BDT 2,895.00 tax incl.
BDT 0.00 Tax
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 0.00 Tax
BDT 2,895.00 tax incl.
More
Out-of-Stock
In stock: 0
Black
PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: RBD-1315

PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650.00
BDT 2,650.00 tax incl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax incl.
BDT 2,650.00 tax incl.
BDT 0.00 Tax
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 0.00 Tax
BDT 2,650.00 tax incl.
More
In-Stock
In stock: 13
Yellow Red Black Blue Gray White
Out-of-Stock Tuya 7in1 WiFi Air Quality Monitor PM2.5 CO2 TVOC HCHO AQI Robotics Bangladesh Quick view

Reference: RBD-2550

Tuya 7in1 WiFi Air Quality Monitor PM2.5 CO2 TVOC HCHO AQI

(0)
This multi-functional air quality monitor offers simultaneous testing for PM2.5, CO2, TVOC, HCHO, AQI, temperature, and humidity. Featuring a 2.8-inch TFT color display, it provides clear and easy-to-read detection data. Additionally, the monitor can be connected to the Tuya App for real-time air quality monitoring and historical data trend analysis...
BDT 6,450.00
BDT 6,450.00 tax incl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax incl.
BDT 6,450.00 tax incl.
BDT 0.00 Tax
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 0.00 Tax
BDT 6,450.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Flexible TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,540.00
BDT 3,540.00 tax incl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax incl.
BDT 3,540.00 tax incl.
BDT 0.00 Tax
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 0.00 Tax
BDT 3,540.00 tax incl.
More
Out-of-Stock
In stock: -10
Red White
Out-of-Stock Argon ONE M.2 Case for Raspberry Pi 4 Robotics Bangladesh Quick view

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7
Out-of-Stock PETG Filament Plastic For 3D Printer 1. Quick view

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640.00
BDT 3,640.00 tax incl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax incl.
BDT 3,640.00 tax incl.
BDT 0.00 Tax
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 0.00 Tax
BDT 3,640.00 tax incl.
More
Out-of-Stock
In stock: 0
Red Black Blue White
Out-of-Stock Buzzer Quick view

Reference: RBD-0762

Female Barrel Jack to Alligator/Crocodile connector

(0)
Cable length: 50 cm One connector crocodile test clip  Interface: DC Jack Color: red and black Wire AWG: 1.15mm
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9
Black White
Out-of-Stock Double-ended 50cm Cable Crocodile Clips Robotics Bangladesh Quick view

Reference: RBD-0314

Double-ended 50cm Cable Crocodile Clips

(0)
Colour: Red, Green, Yellow, White, and Black, etc. Cable length: 40 cm. RoboticsBD Net weight: 50 gm. They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends. RoboticsBD *You will receive 1 pcs cable of random color.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Colored UV Resin 500mL Black Robotics Bangladesh Quick view

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Gravity: Analog AC Current Sensor (20A) Robotics Bangladesh Quick view

Reference: RBD-1972

Brand: DFRobot

Gravity: Analog AC Current Sensor (20A)

(0)
Brand Gravity Analog AC Current Sensor 20A AC Current Signal Conversion Module Open Type AC Transformer Probe Included Non-contact Measurement
BDT 3,250.00
BDT 3,250.00 tax incl.
BDT 3,250.00 tax excl.
BDT 3,250.00 tax excl.
BDT 3,250.00 tax incl.
BDT 3,250.00 tax incl.
BDT 0.00 Tax
BDT 3,250.00 tax excl.
BDT 3,250.00 tax excl.
BDT 0.00 Tax
BDT 3,250.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Makeblock XY-Plotter Robot Kit V2 Robotics Bangladesh Quick view

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

(0)
XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving
BDT 25,800.00
BDT 25,800.00 tax incl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax incl.
BDT 25,800.00 tax incl.
BDT 0.00 Tax
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 0.00 Tax
BDT 25,800.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock mDrawbot kit Robotics Bangladesh Quick view

Reference: RBD-1311

mDrawbot kit

(0)
mDrawBot is a 4-in-1 drawing robot kit  it can be assembled into 4 different drawing robots:  mScara. mCar.  mSpider.  mEggBot.
BDT 21,300.00
BDT 21,300.00 tax incl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax incl.
BDT 21,300.00 tax incl.
BDT 0.00 Tax
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 0.00 Tax
BDT 21,300.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit Robotics Bangladesh Quick view

Reference: RBD-1752

Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit

(0)
Ortur Laser Master 2 Model: Ortur OLM2-LU1-4 20W Year: 2021 Engrave Area: 400mm x 430m Available Laser Modules: 20W Model – Laser Power: 5000-5500 MW Laser Engraver and Cutter Kit
BDT 41,000.00
BDT 41,000.00 tax incl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax incl.
BDT 41,000.00 tax incl.
BDT 0.00 Tax
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 0.00 Tax
BDT 41,000.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Anycubic I3 Mega S 3D Printer Robotics Bangladesh Quick view

Reference: 1265

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 38,999.00
BDT 38,999.00 tax incl.
BDT 38,999.00 tax excl.
BDT 38,999.00 tax excl.
BDT 38,999.00 tax incl.
BDT 38,999.00 tax incl.
BDT 0.00 Tax
BDT 38,999.00 tax excl.
BDT 38,999.00 tax excl.
BDT 0.00 Tax
BDT 38,999.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Anycubic I3 Mega 3D Printer Robotics Bangladesh Quick view

Reference: 1113

Brand: Anycubic

Anycubic I3 Mega 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 30,999.00
BDT 30,999.00 tax incl.
BDT 30,999.00 tax excl.
BDT 30,999.00 tax excl.
BDT 30,999.00 tax incl.
BDT 30,999.00 tax incl.
BDT 0.00 Tax
BDT 30,999.00 tax excl.
BDT 30,999.00 tax excl.
BDT 0.00 Tax
BDT 30,999.00 tax incl.
More
Out-of-Stock
In stock: 0
PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13
Yellow Red Black Blue Gray Cyan Orange White Green Red Copper
Out-of-Stock RJ45 Connector Modular Jack for PCB and Faceplate Robotics Bangladesh Quick view

Reference: RBD-1588

RJ45 Connector Modular Jack for PCB and Faceplate

(0)
Gold plated phosphor bronze contacts. Polycarbonate body construction. IDC Contact termination. Straight orientation.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock RJ 45 Connectors Robotics Bangladesh Quick view

Reference: RBD-1586

RJ 45 Connectors

(0)
Gold plated phosphor bronze contacts. Polycarbonate body construction. IDC Contact termination. Straight orientation.
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Gravity: Analog pH Sensor/Meter Kit V2 Robotics Bangladesh Quick view

Reference: RBD-1969

Brand: DFRobot

pH Sensor Gravity Analog pH Sensor Meter Kit V2

(0)
Specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. Improved precision and user experience. Compatible with 5V and 3.3V. Quickly build the pH meter, plug and play, no welding.
BDT 7,994.00
BDT 7,994.00 tax incl.
BDT 7,994.00 tax excl.
BDT 7,994.00 tax excl.
BDT 7,994.00 tax incl.
BDT 7,994.00 tax incl.
BDT 0.00 Tax
BDT 7,994.00 tax excl.
BDT 7,994.00 tax excl.
BDT 0.00 Tax
BDT 7,994.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock 6.5 inch Jumper Wire (Pack of 2) Robotics Bangladesh Quick view

Reference: RBD-1844

6.5 inch Jumper Wire (Pack of 2)

(0)
The head of the cables is stronger, Don’t worry it will easy to fall. Use for Arduino Or other kinds of circuit experiment. High quality and in good working condition Durable and reusable Easy to install and use
BDT 5.00
BDT 5.00 tax incl.
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 5.00 tax incl.
BDT 5.00 tax incl.
BDT 0.00 Tax
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 0.00 Tax
BDT 5.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Male to Female Jumper Wires 40 Pin 30cm Robotics Bangladesh Quick view

Reference: RBD-2104

Male to Female Jumper Wires 40 Pin 30cm

(0)
40P color jumper wires Length: 300mm Weight: 45 gm Compatible with 2.54mm spacing pin headers High quality and in good working condition Durable and reusable Easy to install and use
BDT 140.00
BDT 140.00 tax incl.
BDT 140.00 tax excl.
BDT 140.00 tax excl.
BDT 140.00 tax incl.
BDT 140.00 tax incl.
BDT 0.00 Tax
BDT 140.00 tax excl.
BDT 140.00 tax excl.
BDT 0.00 Tax
BDT 140.00 tax incl.
More
Out-of-Stock
In stock: -1
Out-of-Stock 2mm - 7mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5) Robotics Bangladesh Quick view

Reference: RBD-0705

2mm - 7mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5)

(0)
2mm - 7mm U Shape Solderless Breadboard Jumper Cable Designed for solderless breadboarding Helps keep projects neat and organized Eliminates the need for stripping cables
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock 10mm - 12mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5) Robotics Bangladesh Quick view

Reference: RBD-0710

10mm - 12mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5)

(0)
10mm - 12mm U Shape Solderless Breadboard Jumper Cable Designed for solderless breadboarding Helps keep projects neat and organized Eliminates the need for stripping cables
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock 15mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5) Robotics Bangladesh Quick view

Reference: RBD-0713

15mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5)

(0)
15mm U Shape Solderless Breadboard Jumper Cable Designed for solderless breadboarding Helps keep projects neat and organized Eliminates the need for stripping cables
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock 17mm - 25mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5) Robotics Bangladesh Quick view

Reference: RBD-0734

17mm - 25mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5)

(0)
17mm - 25mm U Shape Solderless Breadboard Jumper Cable Designed for solderless breadboarding Helps keep projects neat and organized Eliminates the need for stripping cables
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
Out-of-Stock
In stock: 0
Back to top

Follow us on Facebook

Facebook