You can print your PCB on this paper with laser printer (don't use inkjet).This paper helps the ink bond with copper easily with heat and little bit pressure then you can process your PCB. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
Note: You can use the laser printer! Can not use inkjet printer.
Remove the white paper, laser printer (or copier) to the PCB map, hit the smooth side, apply to the copper, and iron into the machine or rapid transfer to plate. DIY Transfer Paper (fan-made high-precision electronic circuit board must have the material).
Features:
- Plate with high precision.
- Low cost method
- Can imprint PCB faster
- Can be used on double-layer PCB
Application:
- Circuit board with a laser printer to print to the circuit diagram of the smooth thermal transfer paper.
- Raised with the laminator between 150-180 degrees Celsius, the heat transfer printed circuit side of the paper deposited in the Bonded Copper on the transfer; the system can also be used instead of iron plate machine, hand transfer.
- Remove the transfer paper after printing, the Bonded into the ferric chloride solution to corrosion.
- Finally, remove the circuit board using toner.
| General Specification |
| Material | Toner Paper for Ink transfer |
| Length (mm) | 210 |
| Width (mm) | 297 |
| Applied Heat | 150-180 degrees Celsius |
| Weight (gm) | 2 |
| Shipment Weight | 0.005 kg |
| Shipment Dimensions | 12 × 8 × 2.5 cm |
Please allow 1-3cm measuring deviation due to manual measurement.
Package Includes:
1 x A4 Size Sheet Toner Transfer Paper For DIY PCB Electronic Prototype
