The XKC-Y25 24V NPN Intelligent Non-Contact Liquid Water Level Sensor is a highly reliable solution for detecting liquid levels in non-metallic containers without requiring direct contact or drilling. Featuring advanced signal processing technology and a high-speed processing chip, it ensures stable and accurate detection even in airtight and high-pressure containers. Built with an IP67 waterproof ABS enclosure, it is resistant to environmental factors, scale buildup, and electromagnetic interference. With 24V DC operation and NPN output, this sensor is ideal for integration into industrial monitoring systems, smart appliances, and medical equipment where accurate and safe liquid detection is critical. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
Updated Grove Light Sensor V1.2 for accurate light intensity detection Uses GL5528 LDR + LM358 dual OP-AMP for reliable analog output High sensitivity in low-light conditions, wide spectrum detection Simple analog output signal (ADC compatible) for easy integration Plug-and-play Grove interface, perfect for beginners & prototyping Ideal for...
Compact fingertip heart rate sensor with built-in amplification and noise filter Operates with both 3.3V and 5V systems for wide compatibility Simple breadboard-friendly interface with pre-soldered leads and pin Detects heartbeat signals reliably for biomedical and wearable projects Ideal for Arduino, Raspberry Pi, and microcontroller applications...
RGB Color Light Sensor Module powered by ISL29125 for accurate color detection. I2C Interface compatible with Arduino, Raspberry Pi, and other microcontrollers. Features 16-bit ADC for precise color measurement in two selectable sensitivity ranges. Designed for low power consumption, ideal for battery-powered applications. Operates in a wide range of...
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
HW-671 WCS1800 Hall Current Sensor Module with over-current protection Current detection range: DC ±35A, AC 25A High-resolution current detection: 60mV/A Adjustable overcurrent threshold with a resolution of 1.5A Analog and TTL signal outputs for microcontroller integration Compact design with mounting holes for easy installation
We'll slide into your inbox when the product is back in stock.
You have successfully subscribed to this product
Description: Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they’re usually unreliable or difficult to implement. Well not anymore! We’ve found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed it into your next project.
Non-contact liquid level sensor for contamination-free detection Supports wide voltage range: 3.3V–26V (recommended ≤24V) Compact design: 10mm × 30mm, easy integration Sensing distance: ~3–4.5mm (not for metal containers) Durable construction with long service life Open-drain output for compatibility with microcontrollers, PLCs, and more
LDR 20 mm Light Depending Resistor Low-cost sensor device Wide spectral response Use in fire alarms, smoke alarms, control street light Low cost. Ambient Temperature Range. Wide spectral response.
All-in-one Oxygen Monitoring: This complete kit combines the OCS-3F ultrasonic sensor with an LCD display and power supply for convenient oxygen concentration and flow rate monitoring. Enhanced User Experience: The large LCD screen displays real-time oxygen concentration (21% - 95.6%), flow rate (up to 20 L/min), and room temperature for clear and easy...
The module can detect the surrounding environment of the humidity and temperature High reliability and excellent long-term stability The output from the digital output Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation). Temperature measuring range: 0~+50degree. Humidity measurement accuracy: ±5.0%RH. Temperature measurement...
High-precision BME280 I2C sensor measures temperature, humidity, and pressure. Supports 3.3V and 5V operation with built-in voltage regulator and logic level shifters. Measures temperature (-40°C to 85°C), humidity (0–100%), and pressure (300–1100hPa). Compact 4-pin I2C interface for easy integration with Arduino, ESP32, and Raspberry Pi. Provides...
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V). RoboticsBD Max current draw: 15mA @ 5V. Working Flow Rate: 1 to 30 Liters/Minute. Maximum water pressure: 2.0 MPa. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min). RoboticsBD
Fixed focus lens on-board Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images Supports 1080p30, 720p60 and 640x480p90 video Size 25mm x 23mm x 9mm Weight just over 3g Connects to the Raspberry Pi board via a short ribbon cable (supplied) Camera v2 is supported in the latest version of Raspbian, Raspberry...
AS7343 14-channel spectral sensor covering 380nm to 1000nm (VIS to NIR range) Features 12 visible spectrum channels, 1 near-infrared channel, and clear/flicker detection channels Optimized for reflective, transmissive, and emissive measurements in consumer and industrial applications Compact design with I²C interface for easy integration Ideal for color...
Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit. RoboticsBD
This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an ultrasonic transmitter, a receiver and a control circuit. There are only four pins that you need to worry about on the HC-SR04: VCC (Power),...
Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default) Work temperature: -20-+80°C
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
Using SW-420 normally closed type vibration sensor Comparator output, clean signal, good waveform, strong driving ability, >15mA Operating voltage 3.3V ~ 5V Output format: digital switching output (0 and 1) Using a wide voltage LM393 comparator With bolt holes for easy installation
We'll slide into your inbox when the product is back in stock.
You have successfully subscribed to this product
Working voltage: DC 5 V Static current: 3 mA Working temperature: 0 ~ + 70° Output way: GPIO Induction Angle: Less than 15° Detection range:2 cm to 400 cm Detecting precision: 0.3 cm + 1% Sensor size: Approx. 45 x 20 x 1.6mm Hole diameter: Approx. 1mm. RoboticsBD
Intelligent non-contact liquid water level sensor (RS485 communication) Wide input voltage range: DC 5–24V with low power consumption (5mA) IP67 waterproof ABS enclosure for reliable durability Detects liquid levels in non-metallic, airtight containers without drilling Works with toxic, acidic, alkaline, or high-pressure liquids Induction thickness range:...
Non-contact liquid level sensor for airtight non-metallic containers Wide voltage input (5–24V) for flexible usage PNP output with 1–100mA current capability Fast 500ms response time with high stability & sensitivity Detects water, acids, alkalis, toxic & high-pressure liquids safely Easy external installation, no drilling or direct liquid contact...
BDT 1,170
BDT 1,170tax incl.
BDT 1,170tax excl.
BDT 1,170tax excl.
BDT 1,170tax incl.
BDT 1,170tax incl.
BDT 0Tax
BDT 1,170tax excl.
BDT 1,170tax excl.
BDT 0Tax
BDT 1,170tax incl.
Last items in stock
In stock:3
XKC-Y25 non-contact water level sensor with NPN output
Operates on 24V DC with low 5mA power consumption
IP67 waterproof ABS housing for durability in harsh environments
Detects liquid levels without drilling non-metallic containers
Works with toxic, acidic, alkaline, or high-pressure liquids
Strong anti-interference, stable, and highly sensitive design
