Reference: RBD-0215
Banner

LiPo Amigo is a compact USB-C battery charging module designed for safely charging 3.7V LiPo or Li-Ion batteries. The board features a simple, reliable design with a USB-C input on one side and a JST-PH 2-pin battery connector on the other, making it ideal for embedded projects, prototypes, and compact electronics.
LiPo Amigo is a compact USB-C battery charging module designed for safely charging 3.7V LiPo or Li-Ion batteries. The board features a simple, reliable design with a USB-C input on one side and a JST-PH 2-pin battery connector on the other, making it ideal for embedded projects, prototypes, and compact electronics.
A built-in charging indicator LED provides clear visual feedback during charging. The module comes fully assembled and requires no configuration to operate.
USB-C powered LiPo / Li-Ion battery charger
Supports single-cell 3.7V LiPo and Li-Ion batteries
Compact, stamp-sized PCB
JST-PH 2-pin battery connector
Onboard charging status LED
Fully assembled and ready to use
Simple and reliable charging solution for small devices
| Parameter | Specification |
|---|---|
| Charger IC | MCP73831 |
| Charging Current | 200mA default (up to 500mA via solder jumper) |
| Input Connector | USB Type-C |
| Battery Connector | JST-PH 2-pin |
| Battery Type | 3.7V LiPo / Li-Ion |
| Charge Indicator | Red LED |
| Dimensions | 26 × 21 × 7 mm |
| Assembly | Fully assembled |
Designed only for 3.7V LiPo or Li-Ion batteries
Batteries should have internal protection circuitry
Polarity must be verified before connecting a battery
Optional solder pad allows higher charge current (not recommended for unprotected batteries)
Small embedded systems
Handheld devices
Prototyping and development boards
Portable electronics
Educational projects
1 × LiPo Amigo USB-C Battery Charger Module
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RBD-0215
Reference: RBD-2255
Reference: RBD-1924
Reference: RBD-1560
Reference: RBD-0494
We'll slide into your inbox when the product is back in stock.
Reference: RBD-2638
Reference: RBD-1605
Reference: RBD-3861
Reference: RBD-3954
Reference: RBD-3900
Reference: RBD-3259
Reference: RBD-3192
Reference: RBD-1421
Reference: RBD-3675
We'll slide into your inbox when the product is back in stock.
Reference: RBD-1944
Reference: RBD-2849
Reference: RBD-0954
Reference: RBD-0652
Reference: RBD-0836
Reference: RBD-0837
Reference: RBD-0927
Reference: RBD-0929
Reference: RBD-0931
Reference: RBD-0955
LiPo Amigo is a compact USB-C battery charging module designed for safely charging 3.7V LiPo or Li-Ion batteries. The board features a simple, reliable design with a USB-C input on one side and a JST-PH 2-pin battery connector on the other, making it ideal for embedded projects, prototypes, and compact electronics.
check_circle
check_circle