PICkit3 Microchip MPLAB PICkit 3 PIC In-Circuit Programmer Debugger for PIC and dsPIC Flash Chips

XGecu T48 (TL866-3G) is a high-speed universal IC programmer supporting over 28,000 devices Successor to the TL866II Plus, with 120 MHz 32-bit MCU and faster programming speed. Supports EPROM, EEPROM, MCU, SPI/NOR/NAND Flash, EMMC (up to 256 GB) and PLD/GAL. Features a 40-pin industrial ZIF socket and 16-channel ISP interface. VCC 1.8–6.5 V / VPP 9–25 V,...

High-quality SOIC8/SOP8 Flash Chip IC Test Clip for programming and testing Made with durable plastic and copper metal for long-term use Easy clamp design ensures reliable contact without damaging chip pins Reusable and ideal for debugging, repairing, or flashing BIOS/EEPROM chips Compact size and lightweight, convenient for electronics engineers and...

Compatible with ATMEL AVR Processors: Supports ATMega, Tiny, Classic, CAN, and PWM series chips. Bootloader Recovery: Easily restore Arduino bootloaders. In-Circuit Programming: USB ASP programmer designed for seamless ATMEL AVR microcontroller programming. Firmware-Only USB Driver: No additional USB controllers required. Compact and Reliable: Built with...

Type: Debugger/Programmer Tool/Board Application: Debugging/Programming MCU Supported Families: Flash-based PIC MCUs Core Architecture: PIC, dsPIC

The SOP8 to DIP8 IC Test Clip Socket Programmer Converter is a practical and essential tool for engineers, technicians, and hobbyists working with 8-pin SOIC (SOP8) ICs. This adapter allows you to easily connect SOP8 surface-mount chips to standard DIP8 sockets, making it convenient for in-circuit programming, testing, and EEPROM flashing without soldering.

The Arduino Bootloader Shield AVR ISP Programmable Expansion Board is a versatile and easy-to-use shield designed for burning bootloaders and modifying fuse bits on Arduino-compatible microcontrollers and other AVR-based boards.

The DWIN PGT05 JTAG Burner is a reliable and efficient programmer designed for burning and debugging microcontrollers. Featuring a JTAG interface with USB connectivity, it provides fast and stable programming performance across a wide range of supported devices. Its compact and user-friendly design makes it suitable for both professional developers and...

Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.

Single crystal 12M Tablet 340 USB port to serial port communication. USB1.1/2.0 compliant solution. Built-in 128 byte TX/512 byte RX buffer. Supports auto-Handshake Protocol. Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit/Vista/supports full speed USB data transfer protocol. Design of electromagnetic interference. Data Exchange application. PL2303HXA...

USB to TTL RS232 UART Serial Converter Adapter with PL-2303HX Chip Easily connects RS-232 TTL serial devices to USB-enabled hosts like Arduino, Raspberry Pi, and routers Compatible with Linux, Mac, WinCE, and Windows XP, Vista, 7, and 10 Built-in 5V to 3.3V regulator for versatile operation Includes a 90cm cable with a standard Type-A USB male and 4-pin...

Industrial USB to TTL Serial Converter Cable – DTECH IOT6554 Original FT232 chipset for stable, high-speed communication Selectable 3.3V / 5V TTL level output Supports 300bps to 3Mbps baud rate 6P header (TXD, RXD, GND, VCC, RTS, CTS) Multi-system support with built-in TX/RX indicator LEDs

Compatible with ATMEL AVR Processors: Supports ATMega, Tiny, Classic, CAN, and PWM series chips. Bootloader Recovery: Easily restore Arduino bootloaders. In-Circuit Programming: USB ASP programmer designed for seamless ATMEL AVR microcontroller programming. Firmware-Only USB Driver: No additional USB controllers required. Compact and Reliable: Built with...

Isp interface: 6 PIN Isp interface: 10 PIN Power supply options: USB power Power supply options: external power supply (remove jumper cap)

The NU-Link ICP Programmer is a versatile 3-in-1 tool designed for Nuvoton MCU development and production workflows. Functioning as an emulator, online downloader, and offline downloader, it is suitable for the entire lifecycle — from R&D prototyping to mass production.

PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal...

Versatile Programming Tool: Designed for Arduino Pro Mini, Lilypad, and MultiWii flight control boards. Compact and User-Friendly: MINI USB connector with a compact 6-pin SMD header for easy connectivity. Voltage Configurability: Built-in jumper allows switching between 3.3V and 5V for power and IO levels. Auto-Reset Functionality: Simplifies firmware...