Reference: RBD-3589
Banner

The Mega Pro Embed CH340G / ATmega2560 board is based on the ATmega2560 microcontroller. Built on the Atmel ATmega2560 microcontroller and USB-UART interface chip CH340G. This is a great solution to get your final project on the welding prototype board. RoboticsBD
The Mega Pro Embed functionalities are identical to the Mega 2560. Even though it is an Embed board, it is solid as stable as the Mega Board. It uses the original chip, and 16 MHz high-quality quartz resonators are present on the board. The board uses the chip CH340G as the converter UART-USB. It provides a stable data exchange result when you work at a frequency of 12Mhz (requires the driver to be installed on the computer).
You can power the board or power the pins through the MicroUSB connector. The voltage regulator (LDO) can handle input voltages from 6V to 9V (peak 18V) DC. The voltage regulator allows to use up to 18V as an input value, however, we do not recommend exceeding the recommended values aforementioned, since this can lead to excessive heat and damage the device. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
| General Specification | |
| Microcontroller | ATmega2560 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 6-9V |
| Input Voltage (limit) | 12V |
| Digital I/O Pins | 54 (of which 15 provide PWM output) |
| Analog Input Pins | 16 |
| DC Current for 5V Pin | 800 mA |
| DC Current for 3.3V Pin | 800 mA |
| Flash Memory | 256 KB of which 8 KB used by bootloader |
| SRAM | 8 KB |
| EEPROM | 4 KB |
| Clock Speed | 16 MHz |
| Built-in LED | 13 |
| Length(mm) | 54 |
| Width(mm) | 40 |
| Height(mm) | 18 |
| Weight(g) | 15 |
| Shipment Weight | 0.03 kg |
| Shipment Dimensions | 11 × 8 × 3 cm |
Please allow 5% measuring deviation due to manual measurement.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
1 x Mega2560 Pro ATMEGA2560-16AU USB CH340G Intelligent Electronic Development Board
1 x 21 Pin Headers
1 x 16 Pin Headers
1 x 3 Pin Headers.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RBD-3589
Reference: RBD-3420
Reference: RBD-3212
Reference: RBD-2160
Reference: RBD-2917
Reference: RBD-2366
Brand: Espressif
Reference: RBD-3107
Reference: RBD-3676
Brand: Waveshare
Reference: RBD-2949
Reference: RBD-4200
Reference: RBD-3261
Reference: RBD-1875
Reference: RBD-1827
Reference: RBD-2367
Reference: RBD-3988
Reference: RBD-3734
Reference: RBD-0133
Reference: 0245
Reference: RBD-0656
Reference: RBD-0009
Reference: RBD-0376
Reference: RBD-0654
Reference: RBD-0761
Reference: RBD-0279
Reference: RBD-0682
Reference: RBD-0009
Reference: RBD-1663
Brand: RoboticsBD
Reference: RBD-1153
Reference: RBD-0549
Reference: RBD-1781
Reference: RBD-1780
Reference: RBD-1266
Reference: RBD-0108
Reference: RBD-1782
Reference: RBD-1736
check_circle
check_circle