Home

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 49,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 2,200 kg

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Arduino Boards
  • Categories: Arduino Shield & Module
  • Categories: Communication Module
  • Categories: Sensors
Jumper Wire housing 3 Pin Robotics Bangladesh Quick view

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor Robotics Bangladesh Quick view

Reference: RBD-0145

YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor

(0)
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 280
NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz Robotics Bangladesh Quick view

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17
MLX90614 Contactless Temperature Sensor Module For Arduino Quick view

Reference: RBD-0307

MLX90614 Contactless Temperature Sensor Module For Arduino

(0)
Operating Voltage(V): 3- 5 Operating Current(mA): 2 Communication protocol: I2C Power saving mode Automotive grad Small size, low cost. RoboticsBD
BDT 1,090.00
BDT 1,090.00 tax incl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax incl.
BDT 1,090.00 tax incl.
BDT 0.00 Tax
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 0.00 Tax
BDT 1,090.00 tax incl.
More
In-Stock
In stock: 21
Jumper Wire housing 5 Pin Robotics Bangladesh Quick view

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
Arduino Bluetooth Module HC-06 Robotics Bangladesh Quick view

Reference: RBD-0040

Arduino Bluetooth Module HC-06

(0)
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
BDT 315.00
BDT 315.00 tax incl.
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 315.00 tax incl.
BDT 315.00 tax incl.
BDT 0.00 Tax
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 0.00 Tax
BDT 315.00 tax incl.
More
In-Stock
In stock: 306
Arduino NANO I/O Extension Shield Quick view

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37
5.8GHz Circular Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV Multicopter Robotics Bangladesh Quick view

Reference: RBD-0284

5.8GHz Circular Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV Multicopter

(0)
Gain: 2.0dBi-2.5dBi Antenna connector: RP-SMA Male Connector Standing wave ratio(SWR): <1.5 Weight: TxA10.3g, RxA 11.5g TxA is a circular-polarized Omni antenna with three lobes RxA is a circular-polarized Omni antenna with four lobes
BDT 880.00
BDT 880.00 tax incl.
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 880.00 tax incl.
BDT 880.00 tax incl.
BDT 0.00 Tax
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 0.00 Tax
BDT 880.00 tax incl.
More
In-Stock
In stock: 6
Jumper Wire housing 6 Pin Robotics Bangladesh Quick view

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5
HR202 Humidity Detection Sensor Module Robotics Bangladesh Quick view

Reference: RBD-0147

HR202 Humidity Detection Sensor Module

(0)
Adjustable Sensitivity, External GND. Detect Ambient Humidity. Provided with Fixed Bolt Hole, Convenient to Install. Power Indicator Light & Digital Output Indication Lamp. Using LM393 Chip for Stable Work. DO Small Digital Outputs Interface (0 & 1).
BDT 299.00
BDT 299.00 tax incl.
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 299.00 tax incl.
BDT 299.00 tax incl.
BDT 0.00 Tax
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 0.00 Tax
BDT 299.00 tax incl.
More
In-Stock
In stock: 99
Arduino Micro R3 Robotics Bangladesh Quick view

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24
PN532 NFC RFID Read / Write Module V3 Kit Robotics Bangladesh Quick view

Reference: RBD-0346

PN532 NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 820.00
BDT 820.00 tax incl.
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 820.00 tax incl.
BDT 820.00 tax incl.
BDT 0.00 Tax
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 0.00 Tax
BDT 820.00 tax incl.
More
In-Stock
In stock: 15
Jumper Wire housing 7 Pin Robotics Bangladesh Quick view

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5
Angle Sensor Module for Arduino SW-520D Quick view

Reference: RBD-0151

Angle Sensor Module for Arduino SW-520D

(0)
Operating voltage 3.3V-12V A fixed bolt hole for easy installation Wide voltage LM393 comparator Maximum output current: 15mA Can work on low voltages
BDT 320.00
BDT 320.00 tax incl.
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 320.00 tax incl.
BDT 320.00 tax incl.
BDT 0.00 Tax
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 0.00 Tax
BDT 320.00 tax incl.
More
In-Stock
In stock: 51
Jumper Wire housing 8 Pin Robotics Bangladesh Quick view

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88
SW-420 NC Type Vibration Sensor Module Robotics Bangladesh Quick view

Reference: RBD-0152

SW-420 NC Type Vibration Sensor Module

(0)
Using SW-420 normally closed type vibration sensor Comparator output, clean signal, good waveform, strong driving ability, >15mA Operating voltage 3.3V ~ 5V Output format: digital switching output (0 and 1) Using a wide voltage LM393 comparator With bolt holes for easy installation
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In-Stock
In stock: 195
M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module Robotics Bangladesh Quick view

Reference: RBD-0103

M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module

(0)
This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01...
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 102
Arduino Pro Mini 328 5V/16Mhz Robotics Bangladesh Quick view

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25
RS485 USB-485 Converter Adapter Support Win7 XP Vista Linux Mac OS Robotics Bangladesh Quick view

Reference: RBD-0566

RS485 USB-485 Converter Adapter Support Win7 XP Vista Linux Mac OS

(0)
Fully compliant USB 2.0 standard, backward compatible with USB1.1 Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive Baud Rate Range: 75bps – 115200bps, up to 6Mbps Supports Plug, Play and hot-swap ( USB side) Better than using CH341D chip or similar chip to support the laptop USB port. Communication distance up to 1.2KM
BDT 1,000.00
BDT 1,000.00 tax incl.
BDT 1,000.00 tax excl.
BDT 1,000.00 tax excl.
BDT 1,000.00 tax incl.
BDT 1,000.00 tax incl.
BDT 0.00 Tax
BDT 1,000.00 tax excl.
BDT 1,000.00 tax excl.
BDT 0.00 Tax
BDT 1,000.00 tax incl.
More
In-Stock
In stock: 43
0.96" Inch I2C OLED Display Yellow Robotics Bangladesh Quick view

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22
- BDT 35.00 Reduced price TCS230 TCS3200 Color Sensor Recognition Module Robotics Bangladesh Quick view

Reference: RBD-0156

TCS230 TCS3200 Color Sensor Recognition Module

(0)
Operating Voltage: 3V-5V High-resolution conversion of light intensity to frequency. Chip pins all has drawn for standard 100. Put the needle (2.54 mm). Mil-convenient for bitmap board. Programmable color and full-scale output frequency. Communicate directly with a microcontroller. Low-profile surface mount package.
BDT 515.00 BDT 550.00
BDT 550.00 BDT 515.00 tax incl.
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax incl.
BDT 550.00 BDT 515.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 550.00 BDT 515.00 tax incl.
More
In-Stock
In stock: 15
Jumper Wire housing 4Pin Robotics Bangladesh Quick view

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17
Arduino Pro Micro 5V/16MHz Quick view

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41
On sale! 433Mhz Wireless Serial Transceiver Module - 1 Kilometer Quick view

Reference: RBD-0440

HC-12 433Mhz Wireless Serial Transceiver Module - 1 Kilometer

(0)
433MHz operation Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA). 10dBm output power and high sensitivity providing long range in the open environment. 3V-6V operating voltage. Serial pass-through mode to replace the serial cable (half duplex). IO pass-through modes. RoboticsBD
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 24
MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino Quick view

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10
- BDT 15.00 Reduced price 35mm Piezo Ceramic Elements Sound Sensor Robotics Bangladesh Quick view

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387
3D Printer Nozzle M7 Thread Brass 1. Quick view

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28
Arduino Pro Micro 5V/16MHz Type-C Robotics Bangladesh Quick view

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16
MAX485 RS-485 Module TTL to RS-485 module for Arduino Quick view

Reference: RBD-0560

MAX485 RS-485 Module TTL to RS-485 module for Arduino

(0)
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. A low power consumption for the RS-485 communication Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. Slew-rate limited transceiver All pins of the chip have been lead to can be controlled through the...
BDT 399.00
BDT 399.00 tax incl.
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 399.00 tax incl.
BDT 399.00 tax incl.
BDT 0.00 Tax
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 0.00 Tax
BDT 399.00 tax incl.
More
Sold-out
In stock: -1
5mW Adjustable Laser Dot Diode Module Robotics Bangladesh Quick view

Reference: RBD-0150

5mW Adjustable Laser Dot Diode Module

(0)
Output Power: 5mW Working Voltage: 3-3.3V DC Working temperature: -10 ℃~＋40 ℃ Housing material: Copper Working life: more than 2000 hours Spot mode: Dot Facula (continuous output) Laser wavelength: 650nm red-colored. Operating current: <40mA Power lead length: 120mm. 5V could damage the laser
BDT 26.00
BDT 26.00 tax incl.
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 26.00 tax incl.
BDT 26.00 tax incl.
BDT 0.00 Tax
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 0.00 Tax
BDT 26.00 tax incl.
More
In-Stock
In stock: 164
4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm Robotics Bangladesh Quick view

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1
Back to top

Follow us on Facebook

Facebook