Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 16,590.00

Categories

Categories

Brand

Brand

Weight

Weight

  • 0 kg - 2,078 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Back in Stock
  • Categories: Components
  • Categories: Motor Driver
  • Categories: Power Module & Adapter
  • Condition: New

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0282

XBee USB Adapter

(0)
Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)
Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0121

LED - SMD RGB HL5011 (Pack of 5)

(0)
BDT 10.00
BDT 10.00 tax incl.
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 10.00 tax incl.
BDT 10.00 tax incl.
BDT 0.00 Tax
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 0.00 Tax
BDT 10.00 tax incl.
More
In-Stock
In stock: 1442

Reference: RBD-2550

Tuya 7in1 WiFi Air Quality Monitor PM2.5 CO2 TVOC HCHO AQI

(0)
This multi-functional air quality monitor offers simultaneous testing for PM2.5, CO2, TVOC, HCHO, AQI, temperature, and humidity. Featuring a 2.8-inch TFT color display, it provides clear and easy-to-read detection data. Additionally, the monitor can be connected to the Tuya App for real-time air quality monitoring and historical data trend analysis...
BDT 6,450.00
BDT 6,450.00 tax incl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax incl.
BDT 6,450.00 tax incl.
BDT 0.00 Tax
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 0.00 Tax
BDT 6,450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0195

Brand: RoboticsBD

25mW Infrared Line Laser Light

(0)
25mW Infrared Line Laser Light
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-stock
In stock: 22

Reference: RBD-1542

A2212 1400KV Brushless Outrunner BLDC Motor

(0)
Model: A2212/10T Motor KV: 1400 Max. Efficiency Current: 6-12A No Load Current: 0.7A @10V Current Capacity: 16A/60S LiPO Batteries: 2S-3S
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

(0)
Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 104

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0208

Off-Road Wheels - 130x60mm (Pair)

(0)
"Take on any terrain with our burly off-road wheels." "Get the grip and stability you need with our deep-treaded tires." "Easy-to-mount and built to last - our off-road wheels won't let you down."
BDT 1,450.00
BDT 1,450.00 tax incl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax incl.
BDT 1,450.00 tax incl.
BDT 0.00 Tax
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 0.00 Tax
BDT 1,450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387

Reference: RBD-1746

Neodymium Disc Magnet N35 - 10 x 1 mm

(0)
Neodymium Magnet Shape: Disc Actual Size - 10 x 1 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
In-Stock
In stock: 430

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0226

Brand: SparkFun Electronics

Camera Module - pcDuino V3 (2MP)

(0)
Camera Module - pcDuino V3 (2MP)
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1745

Neodymium Bar Magnet N52 - 48.5 x 24 x 9 mm

(0)
Neodymium Magnet Grade N52 Actual Size - 48.5 x 24 x 9 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-0919

TP4056 Lithium Battery Charger Module With Protection Dual Functions

(0)
Dimension: 25 x 19 x 10 (LxWxH)mm. Input interface: micro USB. Current Protection: Yes Charging mode: Linear charging. Current: 1A adjustable. Charge precision: 1.5%. Input voltage: 4.5V-5.5V. Full charge voltage: 4.2V.
BDT 38.00
BDT 38.00 tax incl.
BDT 38.00 tax excl.
BDT 38.00 tax excl.
BDT 38.00 tax incl.
BDT 38.00 tax incl.
BDT 0.00 Tax
BDT 38.00 tax excl.
BDT 38.00 tax excl.
BDT 0.00 Tax
BDT 38.00 tax incl.
More
In-Stock
In stock: 838

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

(0)
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)
Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
BDT 670.00
BDT 670.00 tax incl.
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 670.00 tax incl.
BDT 670.00 tax incl.
BDT 0.00 Tax
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 0.00 Tax
BDT 670.00 tax incl.
More
In-Stock
In stock: 44

Reference: RBD-0493

RTD PT-100 Temperature Sensor 100mm Probe 0‑400℃

(0)
Temperature Range : 0C-400C Shield Material : Metal Total Length(Approx.) : 2M / 6.6 Ft; Weight : 46g;
BDT 1,150.00
BDT 1,150.00 tax incl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax incl.
BDT 1,150.00 tax incl.
BDT 0.00 Tax
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 0.00 Tax
BDT 1,150.00 tax incl.
More
In-Stock
In stock: 18

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)
Choose your desire Resistor value from below: 
BDT 5.00
BDT 5.00 tax incl.
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 5.00 tax incl.
BDT 5.00 tax incl.
BDT 0.00 Tax
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 0.00 Tax
BDT 5.00 tax incl.
More
In-Stock
In stock: 614

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Follow us on Facebook