• Banner

Active filters
  • Categories: 3D Printed
  • Categories: Instruments
  • Categories: Orange Pi
  • Categories: Robot Platform Chassis
  • Categories: Solar Panel

Reference: RBD-0796

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

(0)
Three DOF (degree of freedom) leg  Can walk in any direction.  Maximum torque of 13kg for the legs.
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0284

5.8GHz Circular Polarized Mushroom Antenna RP-SMA Set Tx/Rx for FPV Multicopter

(0)
Gain: 2.0dBi-2.5dBi Antenna connector: RP-SMA Male Connector Standing wave ratio(SWR): <1.5 Weight: TxA10.3g, RxA 11.5g TxA is a circular-polarized Omni antenna with three lobes RxA is a circular-polarized Omni antenna with four lobes
BDT 880.00
BDT 880.00 tax incl.
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 880.00 tax incl.
BDT 880.00 tax incl.
BDT 0.00 Tax
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 0.00 Tax
BDT 880.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-2930

Mini Solar Panel 60*60mm with Wire

(0)
The Mini Solar Panel 60*60mm with Wire for DIY Projects is ready to use without requiring a frame or special modifications. We have chosen to sell these Polycrystalline solar cells because they are Laser cut to the proper size and encapsulated in the special sun and weather-resistant materials which give them unique characteristics. RoboticsBD
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In stock
In stock: 50

Reference: RBD-0716

65mm Rubber Wheel with 25GA Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-2931

Mini Solar Panel 80*60mm with Wire

(0)
The Mini Solar Panel 80*60mm with Wire for DIY Projects is ready to use without requiring a frame or special modifications. We have chosen to sell these Polycrystalline solar cells because they are Laser cut to the proper size and encapsulated in the special sun and weather-resistant materials which give them unique characteristics. RoboticsBD
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In stock
In stock: 50

Reference: RBD-0918

Multifunctional Standard Aluminum Servo Bracket

(0)
Supported Motors: 10kg-cm servos (such as MG995, MG996) This product is made of high-quality materials and is durable. RoboticsBD Various sensors can be installed to complete a variety of novel interactive works through the servo controller. It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
BDT 192.00
BDT 192.00 tax incl.
BDT 192.00 tax excl.
BDT 192.00 tax excl.
BDT 192.00 tax incl.
BDT 192.00 tax incl.
BDT 0.00 Tax
BDT 192.00 tax excl.
BDT 192.00 tax excl.
BDT 0.00 Tax
BDT 192.00 tax incl.
More
In-Stock
In stock: 87

Reference: RBD-0319

K Type Thermocouple Sensor Probe for Temperature Controller

(0)
Type K Type.  Mounting thread: M6  Temperature Range:0-600°C. RoboticsBD
BDT 300.00
BDT 300.00 tax incl.
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 300.00 tax incl.
BDT 300.00 tax incl.
BDT 0.00 Tax
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 0.00 Tax
BDT 300.00 tax incl.
More
In-Stock
In stock: 113

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0920

Ultrasonic Sensor Acrylic Mounting Bracket

(0)
Acrylic Body. Easy to install. compatible with HC-SR04
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-0383

ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier

(0)
Wide Supply Range: 2.0v To 5.5v Low Current Consumption Continuous Mode: Only 150µa Single-shot Auto Shut-down Programmable Data Rate: 8SPS to 860SPS It has Internal low-drift voltage reference
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0956

17DOF Biped Robot Educational Robot Kit 17 Degrees of Freedom Humanoid / Humanoids Walking Robot Kit

(0)
For hobbyists, robot competitions, kids etc. Size:40cm(H) x 23cm(W) Containing the 17DOF: 1DOF of the head 4DOF of the arm 2DOF of the shoulder 2DOF of the hip 6DOF of the legs 2DOF of the feet
BDT 7,999.00
BDT 7,999.00 tax incl.
BDT 7,999.00 tax excl.
BDT 7,999.00 tax excl.
BDT 7,999.00 tax incl.
BDT 7,999.00 tax incl.
BDT 0.00 Tax
BDT 7,999.00 tax excl.
BDT 7,999.00 tax excl.
BDT 0.00 Tax
BDT 7,999.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0389

PL2303 USB to TTL Serial Converter

(0)
Adopt imported controller PL2303HX, which can stabilize the flash with high speed 500mA self-recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power The entire board is coated by the high quality transparent...
BDT 98.00
BDT 98.00 tax incl.
BDT 98.00 tax excl.
BDT 98.00 tax excl.
BDT 98.00 tax incl.
BDT 98.00 tax incl.
BDT 0.00 Tax
BDT 98.00 tax excl.
BDT 98.00 tax excl.
BDT 0.00 Tax
BDT 98.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1069

N20 DC Gear Motor Wheel 3PI miniQ Car wheel Tyre

(0)
Wheel Outer Diameter: 44MM Wheel width: 18 mm Tire material: Rubber Color: Black & White Weight: 18 gm Coder Accuracy: 12 pulses per revolution Wheel weight: 19.4 gm.
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 126

Reference: RBD-0396

Ultrasonic Transducer Waterproof Distance Measuring Sensor Module

(0)
Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions Small size, easy to use Operating Voltage: 5 V Sonar Sensing Range: 25-450 cm Max. Sensing Range: 450 cm Frequency: 40 KHz. RoboticsBD
BDT 615.00
BDT 615.00 tax incl.
BDT 615.00 tax excl.
BDT 615.00 tax excl.
BDT 615.00 tax incl.
BDT 615.00 tax incl.
BDT 0.00 Tax
BDT 615.00 tax excl.
BDT 615.00 tax excl.
BDT 0.00 Tax
BDT 615.00 tax incl.
More
In-Stock
In stock: 34

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1070

Ball Caster 3PI N20

(0)
Dimensions: 22 x 15 mm (Diameter x Height) Weight: 10 gm Body Case Material: Plastic Ball Material: 304 Stainless Steel Application: for MiniQ robot
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 98

Reference: RBD-0706

UNI-T A12T Temperature Humidity Meter

(0)
Dual temperature measurement. RoboticsBD Clock function: 12/24 hour modes  Alarm clock: Rings up to 60s   Comfort level: comfortable, wet, dry
BDT 2,100.00
BDT 2,100.00 tax incl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax incl.
BDT 2,100.00 tax incl.
BDT 0.00 Tax
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 0.00 Tax
BDT 2,100.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1071

N20 Motor Mounting Bracket

(0)
Height: 11mm Width : 25mm Material: high-quality plastic
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In-Stock
In stock: 346

Reference: RBD-0709

UNI-T UT890D+ Digital Multimeter

(0)
6000 Counts True RMS voltage and current measurements Capacitance, Resistance, Buzzer, Diode
BDT 2,600.00 BDT 2,995.00
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 2,995.00 BDT 2,600.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1163

Robotics Arm EEZYbotARM MK1

(0)
The design intent was to make something "easy" to make robotics arm It uses Mini servos for driving the kinematics linkage and you can use Arduino and a decent power supply (2A) to program and drive it. All the pieces are 3DPrinted in PLA.
BDT 6,599.00
BDT 6,599.00 tax incl.
BDT 6,599.00 tax excl.
BDT 6,599.00 tax excl.
BDT 6,599.00 tax incl.
BDT 6,599.00 tax incl.
BDT 0.00 Tax
BDT 6,599.00 tax excl.
BDT 6,599.00 tax excl.
BDT 0.00 Tax
BDT 6,599.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0711

UNI-T UT61A Digital Multimeter

(0)
Auto range MAX/MIN/REL mode Auto power off LCD backlight Analog bar graph
BDT 4,100.00 BDT 4,300.00
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 4,300.00 BDT 4,100.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1252

Makeblock mBot Ranger 3-in-1 educational robot kit

(0)
Tackle any terrain with Ranger’s 3 preset forms All-terrain Off-road Land Raider Super Speedy Dashing Raptor Self-balancing Nervous Bird EASY INSTALLATION: Build in as little as 45 minutes
BDT 25,990.00
BDT 25,990.00 tax incl.
BDT 25,990.00 tax excl.
BDT 25,990.00 tax excl.
BDT 25,990.00 tax incl.
BDT 25,990.00 tax incl.
BDT 0.00 Tax
BDT 25,990.00 tax excl.
BDT 25,990.00 tax excl.
BDT 0.00 Tax
BDT 25,990.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0712

UNI-T Scope Digital Multimeter UT81B

(0)
Signal input data processing auto measure  waveform storage and transfer AC/DC voltage and current resistance diode continuity frequency duty ratio capacitance
BDT 17,999.00
BDT 17,999.00 tax incl.
BDT 17,999.00 tax excl.
BDT 17,999.00 tax excl.
BDT 17,999.00 tax incl.
BDT 17,999.00 tax incl.
BDT 0.00 Tax
BDT 17,999.00 tax excl.
BDT 17,999.00 tax excl.
BDT 0.00 Tax
BDT 17,999.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1254

XiaoR STM32 Self Balancing Programmable Robot

(0)
Size: 202X85X200mm Weight: 1150 gram MCU: STM32F105 Motor Drive: LV8731 motor driver chip Charging Direct
BDT 19,990.00
BDT 19,990.00 tax incl.
BDT 19,990.00 tax excl.
BDT 19,990.00 tax excl.
BDT 19,990.00 tax incl.
BDT 19,990.00 tax incl.
BDT 0.00 Tax
BDT 19,990.00 tax excl.
BDT 19,990.00 tax excl.
BDT 0.00 Tax
BDT 19,990.00 tax incl.
More
In-Stock
In stock: 4

Follow us on Facebook