Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 86,245.00

Categories

Categories

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 17,170 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Availability: In stock
  • Categories: 3D Printer
  • Categories: Battery & Charger
  • Categories: Components
  • Categories: Sensors
  • Categories: Solar Panel

Reference: RBD-0494

Actiontec Genuine 12V 2A AC Adapter

(0)
Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 12V 2A. Input Plug: 2-Pin USA type. Output Plug: 5.5mm DC plug. RoboticsBD Model: STD-120200
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 66

Reference: RBD-0343

Thermoelectric Cooler Peltier Module TEC1-12706

(0)
Model number: TEC1-12706 Operating Voltage: 12V Maximum Voltage Umax (V) : 15.4V Maximum Current Imax (A) : 6A Maximum Power: 92 W Maximum Temperature: 138°C Power Cord: 200mm.RoboticsBD
BDT 298.00
BDT 298.00 tax incl.
BDT 298.00 tax excl.
BDT 298.00 tax excl.
BDT 298.00 tax incl.
BDT 298.00 tax incl.
BDT 0.00 Tax
BDT 298.00 tax excl.
BDT 298.00 tax excl.
BDT 0.00 Tax
BDT 298.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-0430

Line Follower Sensor- 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Output format: 8 Analog and Digital voltages. Optimal sensing distance: 0.125″ (3 mm). RoboticsBD
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0315

US-015 Ultrasonic Module Distance Measuring Transducer Sensor

(0)
Working voltage: DC 5 V Static current: 3 mA Working temperature: 0 ~ + 70° Output way: GPIO Induction Angle: Less than 15° Detection range:2 cm to 400 cm Detecting precision: 0.3 cm + 1% Sensor size: Approx. 45 x 20 x 1.6mm Hole diameter: Approx. 1mm. RoboticsBD
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 47

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0988

18650 Battery Holder 3S with wire

(0)
Hold 3 standard 18650 batteries. Wire Length: 15 cm. Output: 11.1 V. Dimension (Appro.) : 76 x 60 x 18 mm. Weight: 18 gm. High-quality plastic material
BDT 75.00 BDT 90.00
BDT 90.00 BDT 75.00 tax incl.
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax incl.
BDT 90.00 BDT 75.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 90.00 BDT 75.00 tax incl.
More
In-Stock
In stock: 350

Reference: RBD-0349

Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board

(0)
Support for the Arduino IDE 1.0 + (OSX/Windows/Linux). Power via USB or External Source or 7-16 v to 5 v (automatic selection).RoboticsBD The Onboard, 150 ma 5 v Regulator. Built-in USB and serial were debugging). 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming...
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 157

Reference: RBD-0320

MAX6675 Module + K Type Thermocouple Sensor (Arduino compatiable)

(0)
Internal integrated cold junction compensation circuit. RoboticsBD With a simple three serial SPI interface; Temperature signal can be converted into 12-bit digital Embedded thermocouple break detection circuitry. High impedance differential inputs. Operating Voltage(VDC): 3 to 5.5 Temperature Range(°C): 0 to +1024 Cold Junction Compensation Range(°C):...
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 14

Reference: RBD-0989

18650 Battery Holder – 1 Cell

(0)
Hold A standard 18650 batteries Wire : 15cm Output: 3.7v Dimension (Appro.): 76x20x20xmm Weight: 8gm High-quality plastic material
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In-Stock
In stock: 135

Reference: RBD-0350

STM32F103C8T6 Blue Pill Development Board

(0)
100% Brand new and high quality STM32 Board Model: STM32F103C8T6. Core: ARM 32 Cortex-M3 CPU. Debug mode: SWD. 72MHz work frequency. 64K flash memory, 20K SRAM. RoboticsBD 2.0-3.6V power, I/O.
BDT 490.00
BDT 490.00 tax incl.
BDT 490.00 tax excl.
BDT 490.00 tax excl.
BDT 490.00 tax incl.
BDT 490.00 tax incl.
BDT 0.00 Tax
BDT 490.00 tax excl.
BDT 490.00 tax excl.
BDT 0.00 Tax
BDT 490.00 tax incl.
More
In-Stock
In stock: 152

Reference: RBD-0999

AA Battery Holder 4S with Barrel Jack Connector

(0)
Holds 4 AA batteries The standard 5.5×2.1mm barrel jack at the output. Easy install, convenient to use. Dimensions mm (LxWxH): 62 x 58 x 15 Weight: 15 gm Material: Plastic Internal Connection: Series
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0364

Aluminum Heat Sink With Adhesive for Raspberry Pi 3B/3B+/4B

(0)
Reduces the risk of hardware failure due to overheating Low profile, will fit into most cases. Simple, Passive cooling. No need for noisy fans. RoboticsBD Perfectly sized for the RPi’s CPU
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In-Stock
In stock: 121

Reference: RBD-1019

3S 20A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board 12.6V Cell

(0)
Charging Voltage: 12.6V-13V Overcharge Voltage Range: 4.25V-4.35V ± 0.05V Overpressure Voltage Range: 2.3V-3.0V ± 0.05V Upper Limit Operating Current: 5A-6A
BDT 300.00
BDT 300.00 tax incl.
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 300.00 tax incl.
BDT 300.00 tax incl.
BDT 0.00 Tax
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 0.00 Tax
BDT 300.00 tax incl.
More
In-Stock
In stock: 34

Reference: RBD-0442

DC 12V Solenoid Electric Door Lock

(0)
Holding force: 0.25 kg Energized forms: intermittent Unlocking time: 1s Dimensions: 27 x 29 x 18 mm (LxWxH) High quality ultra-compact electric lock. RoboticsBD
BDT 750.00
BDT 750.00 tax incl.
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 750.00 tax incl.
BDT 750.00 tax incl.
BDT 0.00 Tax
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 0.00 Tax
BDT 750.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

(0)
Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0344

Weighing Sensor 24 Bit Load Cell Amplifier HX711

(0)
Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit. RoboticsBD
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-1075

IMAX B6 80W 6A Charger 1-6 Cells (Copy)

(0)
Microprocessor controlled Delta-peak sensitivity Individual cell balancing LiIon, LiPoly, and LiFe capable NiCd and NiMH capable Large range of charge currents Storage charge function Time limit function Input voltage monitoring (Protects car batteries in the field) You need at least a 12V 6A Power Adapter to Power it. You can purchase it separately. Link 
BDT 3,850.00
BDT 3,850.00 tax incl.
BDT 3,850.00 tax excl.
BDT 3,850.00 tax excl.
BDT 3,850.00 tax incl.
BDT 3,850.00 tax incl.
BDT 0.00 Tax
BDT 3,850.00 tax excl.
BDT 3,850.00 tax excl.
BDT 0.00 Tax
BDT 3,850.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 309.00
BDT 309.00 tax incl.
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 309.00 tax incl.
BDT 309.00 tax incl.
BDT 0.00 Tax
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 0.00 Tax
BDT 309.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-0352

Knock Sensor Module KY-031

(0)
Detect shocks with the spring and send a signal to Controller Board Operating voltage: 3.3V-5V Digital output Bolt holes for easy installation. RoboticsBD
BDT 69.00
BDT 69.00 tax incl.
BDT 69.00 tax excl.
BDT 69.00 tax excl.
BDT 69.00 tax incl.
BDT 69.00 tax incl.
BDT 0.00 Tax
BDT 69.00 tax excl.
BDT 69.00 tax excl.
BDT 0.00 Tax
BDT 69.00 tax incl.
More
In-Stock
In stock: 62

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1258

Lipo Battery 1000mAh 7.4V 2S

(0)
Model No: XW Power Eagle Lipo 1000mAh 7.4V 2S 25C Lipo Battery (T Plug Connector) Weight: 76 gm. Voltage: 7.4V. Dimensions : 26x34x72 (mm ). Max Continuous Discharge : 25C(25A). Balance Plug: JST-XH. Max Burst Discharge: 90 C (50A). Discharge Plug: T-Plug.
BDT 1,020.00
BDT 1,020.00 tax incl.
BDT 1,020.00 tax excl.
BDT 1,020.00 tax excl.
BDT 1,020.00 tax incl.
BDT 1,020.00 tax incl.
BDT 0.00 Tax
BDT 1,020.00 tax excl.
BDT 1,020.00 tax excl.
BDT 0.00 Tax
BDT 1,020.00 tax incl.
More
In-Stock
In stock: 23

Reference: RBD-0354

TSL2561 Luminosity & Infrared Light integrating sensor

(0)
Approximates Human eye Response Extremely wide dynamic range 1 to 600,000,000 Counts Lux Range: 188u Lux sensitivity, up to 88,000 Lux input measurements Voltage range: 3.3-5V into the onboard regulator This board/chip uses I2C 7-bit addresses 0x29 and 0x28. RoboticsBD
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1259

Lipo Battery 1500mAh 7.4V 2S

(0)
Model No: XW Power Eagle Lipo 1500mAh 7.4V 2S 25C Lipo Battery (T Plug Connector) Weight: 76 gm. Voltage: 7.4V. Dimensions : 26x34x72 (mm ). Max Continuous Discharge : 25C(25A). Balance Plug: JST-XH. Max Burst Discharge: 90 C (50A). Discharge Plug: T-Plug.
BDT 1,300.00
BDT 1,300.00 tax incl.
BDT 1,300.00 tax excl.
BDT 1,300.00 tax excl.
BDT 1,300.00 tax incl.
BDT 1,300.00 tax incl.
BDT 0.00 Tax
BDT 1,300.00 tax excl.
BDT 1,300.00 tax excl.
BDT 0.00 Tax
BDT 1,300.00 tax incl.
More
In-Stock
In stock: 26

Reference: RBD-0394

Slip Ring - 6 Wire (1.5A) max 240V

(0)
They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends. RoboticsBD
BDT 1,500.00
BDT 1,500.00 tax incl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax incl.
BDT 1,500.00 tax incl.
BDT 0.00 Tax
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 0.00 Tax
BDT 1,500.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0355

HC-020K Speed Measuring Module With Speed Encoder Kit

(0)
Description:Working voltage: 4.5V to 5.5 V.Transmit tube pressure drop: Vf = 1.6 VTransmit tube current: 20 mASignal output: A, B two way; The TTL levelDistinguish precision: 0.01 mmMeasurement frequency, 100 KHZEncoder diameter: 24 mmEncoder type D hole diameter: 4 mmThe encoder resolution: 20 line
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-1073

3.7V 600mAh 25C Lipo Battery for Eachine X73 QX95 QX90 QX80 QX100

(0)
3.7V 600mAh 25C Lipo battery Product Type: Lithium Polymer Battery Pack The LiPo battery has matched resistance. Good Temperature Control. Minimum weight in Class
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 33

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0357

GY-ML8511 Ultraviolet Light UV Sensor Module

(0)
Operating voltage (VCC): 3 V to 5V Operating current: 120μA (typical) 190μA (max) Operating Temperature: -40°C ~ +85°C Photodiode sensitive to UV-A and UV-B Embedded operational amplifier Analog voltage output Low supply current (300uA type) and low standby current (0.1uA type) RoboticsBD
BDT 1,700.00
BDT 1,700.00 tax incl.
BDT 1,700.00 tax excl.
BDT 1,700.00 tax excl.
BDT 1,700.00 tax incl.
BDT 1,700.00 tax incl.
BDT 0.00 Tax
BDT 1,700.00 tax excl.
BDT 1,700.00 tax excl.
BDT 0.00 Tax
BDT 1,700.00 tax incl.
More
In-Stock
In stock: 4

Follow us on Facebook