Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 0.00 - BDT 49,599.00

Categories

Categories

Brand

Brand

Weight

Weight

  • 0 kg - 13,200 kg

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Enclosure
  • Categories: Mini Computer/ PC
  • Categories: Tools & Accessories

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-1158

Koptan 10mm x 33m High Temperature Resistant Tape for 3D Printers

(0)
Width: 10 mm Length: About 33m. Type: Polyimide Tape. Heat Resistance: 200℃. Thickness Tolerance: ±10% . One-side Self-adhesive.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2373

Orange Pi Zero2 with Casing

(0)
Orange Pi Zero 2 with casing Versatile open-source maker artifact Can be used for various applications like game consoles, IoT devices, smart home projects, 3D printing, cash registers, and smart gateways
BDT 4,990.00
BDT 4,990.00 tax incl.
BDT 4,990.00 tax excl.
BDT 4,990.00 tax excl.
BDT 4,990.00 tax incl.
BDT 4,990.00 tax incl.
BDT 0.00 Tax
BDT 4,990.00 tax excl.
BDT 4,990.00 tax excl.
BDT 0.00 Tax
BDT 4,990.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1159

Soldering Iron Tip Cleaner

(0)
Removes all Solder Residue Low cost and high-quality Ideal replacement for the old sponges. Removes excess solders from soldering iron tips Provides extended tip life
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 81

Reference: RBD-0399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

(0)
Power supply voltage: 2.7 V-3.3 V/5 V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight power supply voltage: highest 3.3 V. Backlight: Blue. RoboticsBD Note: Current stock is tested by us. 
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-1160

10ml Soldering Flux Pen

(0)
Brand new and high quality 10ml Pen Applicator with specially designed felt tip For rework and touch-up of SMT, SMD, and through hole solder joints Suitable for automotive, computer, telecom etc Flux flows smoothly for consistently secure and uniform solder connections with no mess Rosin residue is non-corrosive, non-conductive, non-clean, moisture...
BDT 280.00
BDT 280.00 tax incl.
BDT 280.00 tax excl.
BDT 280.00 tax excl.
BDT 280.00 tax incl.
BDT 280.00 tax incl.
BDT 0.00 Tax
BDT 280.00 tax excl.
BDT 280.00 tax excl.
BDT 0.00 Tax
BDT 280.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0932

10.1 Inch IPS TFT Monitor HD 1280x800 Portable Color Display Screen

(0)
10.1 inch HD resolution(1280x800) IPS Monitor,Clear and colorful Screen. Multifunctional Monitor Screen: HDMI/VGA/BNC/USB/AV Input, Dual High-quality Built-in Speakers Support Raspberry Pi & Windows PC Automatically. Built-in Media Player with Remote.
BDT 10,990.00
BDT 10,990.00 tax incl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax incl.
BDT 10,990.00 tax incl.
BDT 0.00 Tax
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 0.00 Tax
BDT 10,990.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0401

LCD Module 8x2 Characters Display

(0)
Display: 8×2 character Outline: 58.0x32.0x10.0 VA: 37.8x16.0 Controller: SPLC780D Character: 2.96x5.56 Driver: 1/16
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-1864

BBC Micro Bit Pocket Sized Single Board Computer 1.5

(0)
USB and Bluetooth Low energy connectivity. Compass and Accelerometer. 2 x user-assignable buttons. A 25 LED display. 21 pin edge connector.
BDT 3,490.00
BDT 3,490.00 tax incl.
BDT 3,490.00 tax excl.
BDT 3,490.00 tax excl.
BDT 3,490.00 tax incl.
BDT 3,490.00 tax incl.
BDT 0.00 Tax
BDT 3,490.00 tax excl.
BDT 3,490.00 tax excl.
BDT 0.00 Tax
BDT 3,490.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1161

Premium Quality Soldering Lead 20g Low Melting Point

(0)
Premium Quality Soldering Wire/Lead Low Melting Point Weight: 20-22 Gram  0.8mm Known as Lead or Solder Wire Melting Temperature 180°C Approx. (Tested by RoboticsBD LAB) We suggest this solder wire/lead paired with this solder to make your soldering work easier.  Check GOOT Original KX-60R Soldering Iron 45W Check GOOT Original Soldering Iron TQ-77 here
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 39

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0661

Standard LCD 16x2 Display Yellow Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 240.00
BDT 240.00 tax incl.
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 240.00 tax incl.
BDT 240.00 tax incl.
BDT 0.00 Tax
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 0.00 Tax
BDT 240.00 tax incl.
More
In-Stock
In stock: 307

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1549

NVIDIA Jetson Nano 2GB Developer Kit

(0)
Micro-USB: 5V 2A USB C: 5V 3A. 128-core NVIDIA Maxwell GPU Quad-core ARM A57 2 GB 64-bit LPDDR4 Connectivity by Gigabit Ethernet (RJ45)
BDT 10,990.00
BDT 10,990.00 tax incl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax incl.
BDT 10,990.00 tax incl.
BDT 0.00 Tax
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 0.00 Tax
BDT 10,990.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1162

15G Solid Rosin Welding Soldering Flux Paste High Purity

(0)
Net Content: 15g Paste Color: Brown Does not create High Smoke Does not create Foul/Bad Smell No Residual Waste High-Quality Soldering Additives & Activators for effective soldering Useful for general purpose soldering, electrical wires, components, and cables etc
BDT 10.00
BDT 10.00 tax incl.
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 10.00 tax incl.
BDT 10.00 tax incl.
BDT 0.00 Tax
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 0.00 Tax
BDT 10.00 tax incl.
More
In-Stock
In stock: 189

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

(0)
Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1166

Soldering Iron Stand

(0)
Heavy-duty base to uphold the weight of Soldering iron  Nickel-plated spring holder Spring holder provides substantial room for holding the soldering iron support
BDT 145.00
BDT 145.00 tax incl.
BDT 145.00 tax excl.
BDT 145.00 tax excl.
BDT 145.00 tax incl.
BDT 145.00 tax incl.
BDT 0.00 Tax
BDT 145.00 tax excl.
BDT 145.00 tax excl.
BDT 0.00 Tax
BDT 145.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0924

TM1637 LED Display Module for Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0567

Raspberry Pi 3 Kodi Home Theater Complete Set

(0)
Raspberry Pi 3 Model B Raspberry Pi Cooling Fan Case Heat Sink 16GB Class 10 MicroSD with KODI And Addon Installed HDMI Cable Raspberry Pi Power Adapter Raspberry Pi Remote Built in Wifi and Bluetooth OUT of Stock, Legacy Product
BDT 15,800.00
BDT 15,800.00 tax incl.
BDT 15,800.00 tax excl.
BDT 15,800.00 tax excl.
BDT 15,800.00 tax incl.
BDT 15,800.00 tax incl.
BDT 0.00 Tax
BDT 15,800.00 tax excl.
BDT 15,800.00 tax excl.
BDT 0.00 Tax
BDT 15,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0136

Arduino Due

(0)
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
BDT 3,990.00
BDT 3,990.00 tax incl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax incl.
BDT 3,990.00 tax incl.
BDT 0.00 Tax
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 0.00 Tax
BDT 3,990.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1809

Digispark Pro - ATtiny167 with Micro USB

(0)
Digispark Pro  ATtiny167  Micro USB 16MHz
BDT 539.00 BDT 549.00
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-1685

5050 12V RGB LED Strip For Computer Case 5x.05m Waterproof

(0)
5050 12V RGB Led Strip light 4pin LED Headers For PC, Computer Case  RGB Strip Mainboard Control Panel RGB-Header (+12V,G,R,B) 5x0.5m Waterproof
BDT 1,199.00 BDT 1,690.00
BDT 1,690.00 BDT 1,199.00 tax incl.
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 1,690.00 BDT 1,199.00 tax incl.
BDT 1,690.00 BDT 1,199.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,690.00 BDT 1,199.00 tax incl.
More
In-Stock
In stock: 21

Follow us on Facebook