• Banner

Active filters
  • Availability: Available
  • Categories: 3D Printer
  • Categories: Arduino Boards
  • Categories: Enclosure
  • Categories: Orange Pi
  • Categories: Programmer
  • Categories: Robots

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0154

Arduino Leonardo R3

(0)
Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage (Recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2633

SteerEase Obstacle Avoiding Robot - Plug and Play

(0)
Plug-and-play obstacle avoiding robot Ultrasonic sensor detects and avoids obstacles Up to 3 hours runtime on a full charge Compact and portable design Ideal for beginners and hobbyists
BDT 6,500.00
BDT 6,500.00 tax incl.
BDT 6,500.00 tax excl.
BDT 6,500.00 tax excl.
BDT 6,500.00 tax incl.
BDT 6,500.00 tax incl.
BDT 0.00 Tax
BDT 6,500.00 tax excl.
BDT 6,500.00 tax excl.
BDT 0.00 Tax
BDT 6,500.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2311

USB To Serial Cable TTL 4 Pin Rs 232 UART Converter Adapter Programming Module

(0)
USB 4 Pin TTL RS 232 UART Serial Converter Adapter Programming Module Cable. The PL-2303HX USB to TTL RS232 Serial converter is a low-cost USB to Serial Adapter.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-0682

Arduino LilyPad 328 ATmega328P

(0)
Microcontroller: ATmega168 or ATmega328V Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 55

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-2315

Pogo Pin Probe Clip - 6 Pins with 2.54mm

(0)
Pin Pitch: 2.54mm Probe model: P75-E2 (pointed tip) Needle diameter: 1.3mm Needle sleeve model R75-3W Row pin number: 6Pin Row Number: Single row space between: 2.54mm
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-1541

37 In 1 Sensor Module Board Set Kit For Arduino with Box

(0)
For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.
BDT 1,990.00
BDT 1,990.00 tax incl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax incl.
BDT 1,990.00 tax incl.
BDT 0.00 Tax
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 0.00 Tax
BDT 1,990.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0299

SteerEase Arduino Based Fire Fighting Robot - Plug and Play

(0)
Assemble & Fight Fires: Learn and combat simulated fires with this complete Arduino-based fire-fighting robot kit. Plug-and-Play Simplicity: Pre-assembled components and clear instructions make building and programming your robot a breeze (no soldering required). Educational & Engaging: Explore robotics, coding, and fire safety principles through...
BDT 5,500.00
BDT 5,500.00 tax incl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax incl.
BDT 5,500.00 tax incl.
BDT 0.00 Tax
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 0.00 Tax
BDT 5,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2362

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

(0)
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit...
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 18

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2412

USB ASP AVR Programming Device for ATMEL Processors Arduino

(0)
Compatible Chips:ATMega Series Tiny Series Classic Series CAN Series PWM Series You can also use this to recover your Arduino Bootloader
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1602

WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F

(0)
Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max
BDT 520.00
BDT 520.00 tax incl.
BDT 520.00 tax excl.
BDT 520.00 tax excl.
BDT 520.00 tax incl.
BDT 520.00 tax incl.
BDT 0.00 Tax
BDT 520.00 tax excl.
BDT 520.00 tax excl.
BDT 0.00 Tax
BDT 520.00 tax incl.
More
In-Stock
In stock: 42

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-1812

WeMos D1 mini Pro – ESP8266 based WiFi Module 16MB

(0)
11 digital input/output pins Interrupt/PWM/I2C/one-wire 1 analog input(3.2V max input) 16M bytes(128M bit) Flash External antenna connector Built-in ceramic antenna New CP2104 USB-TO-UART IC
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-2416

WEMOS CH340G Breakout 5V 3.3V USB to Serial Module

(0)
5V (The max current depends on your USB port, usually 500mA) 3.3V (Using LDO, 300mA MAX) Use CH340G with stable performance. Driver: 1. CH340G USB to UART driver
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-2137

ESP32 For Wemos D1 Mini WIFI Bluetooth Development Board

(0)
ESP32 Development Board Integrated antenna and RF balun Dual-mode Wi-Fi and Bluetooth chips Small size and high performance-price ratio Compatible with Arduino
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Reference: RBD-1603

MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB

(0)
USB-TTL converter. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6.
BDT 1,199.00
BDT 1,199.00 tax incl.
BDT 1,199.00 tax excl.
BDT 1,199.00 tax excl.
BDT 1,199.00 tax incl.
BDT 1,199.00 tax incl.
BDT 0.00 Tax
BDT 1,199.00 tax excl.
BDT 1,199.00 tax excl.
BDT 0.00 Tax
BDT 1,199.00 tax incl.
More
In-Stock
In stock: 32

Reference: RBD-2427

USB Type-C Cable 1meter for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 89

Reference: RBD-2164

WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board

(0)
WeMos D1 R32 Mini ESP32 WIFI Bluetooth Development Board CH340 chip for compatibility with Arduino UNO R3 Supports WIFI and Bluetooth connectivity Comes with a Type-B/Micro USB adapter
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2463

Programmer Testing IC Test Clip Black SOIC8/SOP8 Flash Chip IC Test Clamp

(0)
The SOP8 test clip is made of high-quality plastic and copper metal, which is durable and can be reused.When using the SOP8 test clamp, do not force it down, open the clamp and clamp it in from the left and right sides of the chip.The same is true when disassembling, you can't pull it out directly, you must first separate the clip from left to right, and...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 47

Reference: RBD-2138

NodeMCU Mega WiFi R3 Atmega2560 ESP8266 32Mb Memory Board

(0)
Arduino compatibility Full integration USB-TTL converter 32 Mb flash memory Dual microcontrollersA high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here:...
BDT 2,120.00
BDT 2,120.00 tax incl.
BDT 2,120.00 tax excl.
BDT 2,120.00 tax excl.
BDT 2,120.00 tax incl.
BDT 2,120.00 tax incl.
BDT 0.00 Tax
BDT 2,120.00 tax excl.
BDT 2,120.00 tax excl.
BDT 0.00 Tax
BDT 2,120.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-2655

ST-LINK/V2 CN In-Circuit Debugger/Programmer for STM8 and STM32

(0)
5V power supplied by a USB connector USB 2.0 full speed compatible interface USB standard A to mini B cable 1.65V to 5.5V application voltage supported on SWIM interface SWIM low speed and high-speed modes supported Made in China To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might...
BDT 1,750.00
BDT 1,750.00 tax incl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax incl.
BDT 1,750.00 tax incl.
BDT 0.00 Tax
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 0.00 Tax
BDT 1,750.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-0694

ESP8266 CH340 NodeMCU Wifi Module Lua V3

(0)
Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 275

Reference: RBD-2714

ST-LINK V2.1 Emulator Debugger Programmer for STM32

(0)
The ST-LINK V2.1 emulator offers comprehensive support for all STM32 models, providing versatile functionality for development and debugging tasks. This product is a clone and might not support STM32Cube.
BDT 1,690.00
BDT 1,690.00 tax incl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax incl.
BDT 1,690.00 tax incl.
BDT 0.00 Tax
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 0.00 Tax
BDT 1,690.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-1255

NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board

(0)
Integrated 0.96″ OLED Micro USB connection Compatible with Arduino Compatible with NodeMCU(Lua for ESP8266) Input Power 5V Compatible for Arduino Compatible with NodeMCU(Lua for ESP8266)A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please...
BDT 1,250.00
BDT 1,250.00 tax incl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax incl.
BDT 1,250.00 tax incl.
BDT 0.00 Tax
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 0.00 Tax
BDT 1,250.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-2746

QL2006 USB & RS232 PIC ICSP Programmer Emulator for Microchip MCU Programming

(0)
QL-2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.QL-2006 is applicable for almost all...
BDT 13,900.00
BDT 13,900.00 tax incl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax incl.
BDT 13,900.00 tax incl.
BDT 0.00 Tax
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 0.00 Tax
BDT 13,900.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13

Follow us on Facebook