Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 70,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 4,000 kg

  • Banner

Active filters
  • Categories: Internet of things (IoT)
  • Categories: Motor Driver
  • Categories: Programmer
  • Categories: Raspberry Pi
  • Categories: Robotics Parts
  • Categories: Sensors

Reference: RBD-0430

Line Follower Sensor- 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Output format: 8 Analog and Digital voltages. Optimal sensing distance: 0.125″ (3 mm). RoboticsBD
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387

Reference: RBD-2064

SIM800L NEW GPRS GSM Module Core Board Quad-band TTL Serial Port with the antenna

(0)
TTL serial port for serial port, you can link directly to the micro-controller. Don’t need MAX232. Power module automatically boots, homing network. Onboard signal lights all the way. It flashes slowly when there is a signal, it flashes quickly when there is no signal. Note: If you want to buy the cheaper recycled SIM800L Module Click here.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2012

Brand: Raspberry Pi Official

Raspberry Pi Pico With Soldered Headers

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
BDT 970.00 BDT 1,070.00
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1761

Cable For Arduino UNO/MEGA (USB A to B)-3.2 Feet/1Meter

(0)
USB Type: Type-A to Type-B Weight: 80 gm. Length: 1m / 3.2Feet Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In-Stock
In stock: 67

Reference: RBD-1606

L297 Stepper Motor Controller IC

(0)
Supply Voltage Range: 4.75V to 7V Driver Case Style: DIP No. of Pins: 20 Operating Temperature Range: -40°C to +150°C
BDT 96.00
BDT 96.00 tax incl.
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 96.00 tax incl.
BDT 96.00 tax incl.
BDT 0.00 Tax
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 0.00 Tax
BDT 96.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0659

Digital Line Following Sensor - 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Supply current: 150 mA Output format: 8 Digital voltages. Optimal sensing distance: 3 mm. Maximum recommended sensing distance: 6 mm Uses 8 sensors for best resolution Comes with easy to use digital outputs that can be connected directly to microcontrollers Sample Programming Code is available. RoboticsBD
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2195

50 cm Micro USB Cable for Arduino Leonardo and Node MCU

(0)
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 185

Reference: RBD-1734

Dual GPIO Expander for Raspberry Pi Pico, Two Sets of Male Headers

(0)
Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic *Please make sure there are no pin conflicts between the modules you want to use together before connecting. Raspberry Pi Pico and...
BDT 1,040.00
BDT 1,040.00 tax incl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax incl.
BDT 1,040.00 tax incl.
BDT 0.00 Tax
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 0.00 Tax
BDT 1,040.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1557

LC-GSM-SIM800C-2 USB to GSM GPRS SIM800C Module with Bluetooth Computer Control

(0)
USB communication, no need write code Support PC software automation Double antenna Support quad-band, universal worldwide Support 2G/3G/4G Automatically connect to the network Adaptive frequency
BDT 1,750.00
BDT 1,750.00 tax incl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax incl.
BDT 1,750.00 tax incl.
BDT 0.00 Tax
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 0.00 Tax
BDT 1,750.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0326

4WD Smart Robot Chassis Kit

(0)
Very handy and simple in assembling/disassembling. RoboticsBD Strong components so as to withstand extreme terrain conditions. Transparent Car Chassis. Attractive design. RoboticsBD
BDT 1,090.00
BDT 1,090.00 tax incl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax incl.
BDT 1,090.00 tax incl.
BDT 0.00 Tax
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 0.00 Tax
BDT 1,090.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2196

50 cm Cable For Arduino UNO/MEGA (USB A to B)

(0)
USB Type: Type-A to Type-B Weight: 26 gm. Length: 50 cm Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 135

Reference: RBD-1971

Brand: DFRobot

Gravity: Expansion Board for Raspberry Pi Pico

(0)
Gravity Expansion Board Designed for Raspberry Pi Pico Compatible with a variety of Gravity sensors and modules. Gravity Expansion Board for Pico All pins brought out, no soldering required Additional Communication Ports: Digital IO, Analog IO, I2C, SPI, UART, GDI Note: The product not include Raspberry Pi Pico. Buy Raspberry Pi Pico here. Buy Raspberry...
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1765

LILYGO TTGO LoRa32 915Mhz ESP32 OLED 0.96 Inch Wireless Module

(0)
LILYGO TTGO Model: 915MHZ CH9102F  T3_V1.6.1 LoRa32 V2.1_1.6 Version 915Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI Wireless Module ESP-32 SMA
BDT 4,400.00
BDT 4,400.00 tax incl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax incl.
BDT 4,400.00 tax incl.
BDT 0.00 Tax
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 0.00 Tax
BDT 4,400.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-1635

Dual Channel Motor Driver Shield For Arduino

(0)
Logic control, 5V from Arduino main board Polarity protection for External motor power input 2 fast test buttons for each motor channel Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source) Up to 2A current each channel Pin 4, 5,6,7 are used to drive two DC motor Support PWM speed control Support  advance speed control
BDT 1,399.00
BDT 1,399.00 tax incl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax incl.
BDT 1,399.00 tax incl.
BDT 0.00 Tax
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 0.00 Tax
BDT 1,399.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-2198

CH341 USB Programmer

(0)
Model: CH341 Series Main Chip: CH341B Dimensions in mm (LxWxH): 85 x 28 x 12 Weight (gm): 20 8-bit parallel in EPP or MEM mode
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 26

Reference: RBD-1962

ESP32-S2-DevKitM-1 Development Board

(0)
ESP32-S2-DevKitM-1 Equipped with ESP32-S2-MINI-1 module Easy interfacing Integrates ESP32-S2FH4 chip.  PCB antenna  4 MB SPI flash.
BDT 2,190.00
BDT 2,190.00 tax incl.
BDT 2,190.00 tax excl.
BDT 2,190.00 tax excl.
BDT 2,190.00 tax incl.
BDT 2,190.00 tax incl.
BDT 0.00 Tax
BDT 2,190.00 tax excl.
BDT 2,190.00 tax excl.
BDT 0.00 Tax
BDT 2,190.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0034

Servo Motor MG996R 180 Degree Rotation

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 165

Reference: RBD-2311

USB To Serial Cable TTL 4 Pin Rs 232 UART Converter Adapter Programming Module

(0)
USB 4 Pin TTL RS 232 UART Serial Converter Adapter Programming Module Cable. The PL-2303HX USB to TTL RS232 Serial converter is a low-cost USB to Serial Adapter.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-1961

Raspberry Pi Compatible 160° FOV 5MP Fisheye Lens Wide Angle Camera Module

(0)
Wide-angle fish-eye lens Manual Adjustable Focus Field of View Angle: 160° Easy to install and Use Useful for real-time Photography and Videos
BDT 1,490.00
BDT 1,490.00 tax incl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax incl.
BDT 1,490.00 tax incl.
BDT 0.00 Tax
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 0.00 Tax
BDT 1,490.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1820

ESP-32S ESP-WROOM-32 Development Board 38P NodeMCU

(0)
38 Pin version 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN Ultra-Low power consumption works perfectly with the IDE A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0796

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

(0)
Three DOF (degree of freedom) leg  Can walk in any direction.  Maximum torque of 13kg for the legs.
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2315

Pogo Pin Probe Clip - 6 Pins with 2.54mm

(0)
Pin Pitch: 2.54mm Probe model: P75-E2 (pointed tip) Needle diameter: 1.3mm Needle sleeve model R75-3W Row pin number: 6Pin Row Number: Single row space between: 2.54mm
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-2266

ESP32 Dev Board CH340 USB-C

(0)
Versatile and powerful development board for IoT and embedded systems projects. USB Type-C port for reversible plug orientation and easy connection to computer or other devices. Built-in Wi-Fi and Bluetooth module for wireless connectivity. Arduino IDE compatibility for easy code writing and uploading. Suitable for a wide range of applications, including...
BDT 675.00
BDT 675.00 tax incl.
BDT 675.00 tax excl.
BDT 675.00 tax excl.
BDT 675.00 tax incl.
BDT 675.00 tax incl.
BDT 0.00 Tax
BDT 675.00 tax excl.
BDT 675.00 tax excl.
BDT 0.00 Tax
BDT 675.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0020

Servo Motor Micro SG90 180 Degree Rotation

(0)
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
BDT 149.00
BDT 149.00 tax incl.
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 149.00 tax incl.
BDT 149.00 tax incl.
BDT 0.00 Tax
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 0.00 Tax
BDT 149.00 tax incl.
More
In-Stock
In stock: 417

Reference: RBD-2362

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

(0)
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit...
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 18

Reference: RBD-2145

L298P Motor Driver Shield for Arduino

(0)
L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-1602

WeMos D1 CH340 WiFi Development Board ESP8266 ESP-12F

(0)
Microcontroller: ESP8266EX Operating Voltage: 3.3V Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins: 1 Flash Memory: 4MB On-Board Switching Power Supply: Input Voltage Range: 9V to 12V Output: 5V at 1A Max
BDT 520.00
BDT 520.00 tax incl.
BDT 520.00 tax excl.
BDT 520.00 tax excl.
BDT 520.00 tax incl.
BDT 520.00 tax incl.
BDT 0.00 Tax
BDT 520.00 tax excl.
BDT 520.00 tax excl.
BDT 0.00 Tax
BDT 520.00 tax incl.
More
In-Stock
In stock: 42

Follow us on Facebook