Home

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 70,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 4,000 kg

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: Arduino Shield & Module
  • Categories: Keypad /Touch/ Human Interface
  • Categories: Robotics Parts
Motor Shield L293D Robotics Bangladesh Quick view

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133
- BDT 20.00 Reduced price Arduino Uno R3 Bumper Robotics Bangladesh Quick view

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14
Arduino Ethernet Shield W5100 Robotics Bangladesh Quick view

Reference: RBD-0028

Arduino Ethernet Shield W5100

(0)
Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet. Stackable Design, can directly be supported by for Arduino official Ethernet Library. Supports up to four simultaneous socket connections Can be used to store files for serving over the network. Can be accessed using the Mini SD TF library. IEEE802.3af...
BDT 1,170.00
BDT 1,170.00 tax incl.
BDT 1,170.00 tax excl.
BDT 1,170.00 tax excl.
BDT 1,170.00 tax incl.
BDT 1,170.00 tax incl.
BDT 0.00 Tax
BDT 1,170.00 tax excl.
BDT 1,170.00 tax excl.
BDT 0.00 Tax
BDT 1,170.00 tax incl.
More
In-Stock
In stock: 23
Ultrasonic Sonar Sensor HC- SR04 Robotics Bangladesh Quick view

Reference: RBD-0022

Ultrasonic Sonar Sensor HC-SR04

(0)
Affordable Price Operating Voltage: 5 V Sonar Sensing Range: 2-400 cm Max. Sensing Range: 450 cm Frequency: 40 kHz RoboticsBD
BDT 93.00
BDT 93.00 tax incl.
BDT 93.00 tax excl.
BDT 93.00 tax excl.
BDT 93.00 tax incl.
BDT 93.00 tax incl.
BDT 0.00 Tax
BDT 93.00 tax excl.
BDT 93.00 tax excl.
BDT 0.00 Tax
BDT 93.00 tax incl.
More
In-Stock
In stock: 524
3D Pen 2nd Generation LED Display Screen with (6 Color Filament) Robotics Bangladesh Quick view

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

(0)
Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
Last items in stock
In stock: 1
PIR Motion Sensor Robotics Bangladesh Quick view

Reference: RBD-0023

HC-SR501 PIR Motion Sensor

(0)
Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default)  Work temperature: -20-+80°C
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In Stock
In stock: 386
4x4 Keypad - 16 Key - Matrix Membrane Type Robotics Bangladesh Quick view

Reference: RBD-0986

4x4 Keypad - 16 Key - Matrix Membrane Type

(0)
Ultra-thin design & adhesive backing provides easy integration to any project. Excellent price-performance ratio. Easy communication with any microcontroller 5 pins 2.54mm pitch connector, 4x 4type 16 keys. Sticker can peel off for adhesive mounting.
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In-Stock
In stock: 216
Arduino Bluetooth Module HC-06 Robotics Bangladesh Quick view

Reference: RBD-0040

Arduino Bluetooth Module HC-06

(0)
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
BDT 315.00
BDT 315.00 tax incl.
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 315.00 tax incl.
BDT 315.00 tax incl.
BDT 0.00 Tax
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 0.00 Tax
BDT 315.00 tax incl.
More
In-Stock
In stock: 306
PLA Filament for 3D Pen Robotics Bangladesh Quick view

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 175
On sale! Off-Road Wheels - 130x60mm (Single) Robotics Bangladesh Quick view

Reference: RBD-0820

Off-Road Wheels - 130x60mm (Single)

(0)
"Take on any terrain with our burly off-road wheels." "Get the grip and stability you need with our deep-treaded tires." "Easy-to-mount and built to last - our off-road wheels won't let you down."
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 46
Ardumoto Shield L298P Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13
High Torque Gear Motor 12V 100RPM 25GA Quick view

Reference: RBD-0715

High Torque Gear Motor 12V 100RPM 25GA

(0)
Voltage: 12V DC RPM:100RPM Diameter: 25mm Low Noise Shaft equips metal bushes for long life. Metal Gears for High performance It comes with High-Quality gears. High torque at very low Current Consumptions
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 31
2-Axis FPV Nylon PTZ Pan/Tilt Anti-Vibration Camera Platform Quick view

Reference: RBD-0356

Abs Material 2 Axis Pan Tilt Camera Mount With MG90

(0)
PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
In-Stock
In stock: 10
Out-of-Stock Holder for 10 mm LED light strip Robotics Bangladesh Quick view

Reference: RBD-1364

Holder for 10 mm LED light strip

(0)
10 mm LED light strips. Attached with a nail or a screw.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
Out-of-Stock
In stock: -2
85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor Quick view

Reference: RBD-0750

85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 2,350.00
BDT 2,350.00 tax incl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax incl.
BDT 2,350.00 tax incl.
BDT 0.00 Tax
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 0.00 Tax
BDT 2,350.00 tax incl.
More
Last items in stock
In stock: 1
Single Axis Servo Bracket Quick view

Reference: 0828

Single Axis Servo Bracket

(0)
Supported Motors: 10kg-cm servos (such as MG995, MG996) This product is made of high-quality materials and is durable. Various sensors can be installed to complete a variety of novel interactive works through the servo controller. It is convenient to install the camera, which can realize image monitoring and image recognition and tracking. Choose your...
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 5
65mm Rubber Wheel with 25GA Motor Mounting Bracket Quick view

Reference: RBD-0716

65mm Rubber Wheel with 25GA Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 5
Jumper Wire housing 3 Pin Robotics Bangladesh Quick view

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
22 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit Robotics Bangladesh Quick view

Reference: RBD-2119

22 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit

(0)
Interface Type: USB Glass: With Glass Response Time: less than 15ms Size: 22 inch, 10 Touch Point **The product is only available for in-store pickup, we do not ship this product as it is a fragile item. **Product Images are shown for illustrative purposes only and may differ from the actual product.
BDT 11,520.00
BDT 11,520.00 tax incl.
BDT 11,520.00 tax excl.
BDT 11,520.00 tax excl.
BDT 11,520.00 tax incl.
BDT 11,520.00 tax incl.
BDT 0.00 Tax
BDT 11,520.00 tax excl.
BDT 11,520.00 tax excl.
BDT 0.00 Tax
BDT 11,520.00 tax incl.
More
Last items in stock
In stock: 1
Robotics Claw Mechanical Gripper Clamp Kit Quick view

Reference: RBD-0578

Robotics Claw Mechanical Gripper Clamp Kit

(0)
The degree of Freedom (DOF): 2 Paw material: aluminum alloy. RoboticsBD Paw weight: about 68g (without motor) Claws overall length: 108mm (overall maximum length when closed paw) Claws overall width: 98mm (maximum overall width of the paw when open) Paw maximum opening angle: 55mm
BDT 780.00
BDT 780.00 tax incl.
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 780.00 tax incl.
BDT 780.00 tax incl.
BDT 0.00 Tax
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 0.00 Tax
BDT 780.00 tax incl.
More
In-Stock
In stock: 21
Jumper Wire housing 5 Pin Robotics Bangladesh Quick view

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
27 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit Robotics Bangladesh Quick view

Reference: RBD-2118

27 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit

(0)
Interface Type: USB Glass: With Glass Response Time: less than 15ms Size: 27 inch, 10 Touch Point **The product is only available for in-store pickup, we do not ship this product as it is a fragile item. **Product Images are shown for illustrative purposes only and may differ from the actual product.
BDT 14,520.00
BDT 14,520.00 tax incl.
BDT 14,520.00 tax excl.
BDT 14,520.00 tax excl.
BDT 14,520.00 tax incl.
BDT 14,520.00 tax incl.
BDT 0.00 Tax
BDT 14,520.00 tax excl.
BDT 14,520.00 tax excl.
BDT 0.00 Tax
BDT 14,520.00 tax incl.
More
Last items in stock
In stock: 1
Jumper Wire housing 6 Pin Robotics Bangladesh Quick view

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5
On sale! 2WD Wheel Drive Mobile Robot Platform Chassis Robotics Bangladesh Quick view

Reference: RBD-0259

2WD Wheel Drive Mobile Robot Platform Chassis

(0)
Smart car chassis tracing car Robot car chassis with code disk, Ideal for DIY. This car is the tachometer encoder. With a 4 AA battery box (batteries not included). It can be used for distance measurement, velocity. Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, Wireless remote control....
BDT 589.00
BDT 589.00 tax incl.
BDT 589.00 tax excl.
BDT 589.00 tax excl.
BDT 589.00 tax incl.
BDT 589.00 tax incl.
BDT 0.00 Tax
BDT 589.00 tax excl.
BDT 589.00 tax excl.
BDT 0.00 Tax
BDT 589.00 tax incl.
More
In-Stock
In stock: 41
Waveshare 10.1 Inch Capacitive Touch Screen LCD (B) with Case 1280×800 HDMI-Compatible IPS display Robotics Bangladesh Quick view

Reference: RBD-1735

Brand: Waveshare

Waveshare 10.1 Inch Capacitive Touch Screen LCD (B) with Case 1280×800 HDMI-Compatible IPS display

(0)
Original Waveshare IPS screen,1280x800 high resolution Capacitive touch control supports up to ten-points touch When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free Supports Banana Pi, Banana Pro, comes with Lubuntu,...
BDT 14,590.00
BDT 14,590.00 tax incl.
BDT 14,590.00 tax excl.
BDT 14,590.00 tax excl.
BDT 14,590.00 tax incl.
BDT 14,590.00 tax incl.
BDT 0.00 Tax
BDT 14,590.00 tax excl.
BDT 14,590.00 tax excl.
BDT 0.00 Tax
BDT 14,590.00 tax incl.
More
In-Stock
In stock: 5
6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit Robotics Bangladesh Quick view

Reference: RBD-0669

6 DOF Aluminium Mechanical Robotic Arm Clamp Claw Mount Robot Kit

(0)
Without Servo Motor & Servo Horn Material: Metal Color: black, as picture shows Function: clamping object
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 16
PN532 NFC RFID Read / Write Module V3 Kit Robotics Bangladesh Quick view

Reference: RBD-0346

PN532 NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 820.00
BDT 820.00 tax incl.
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 820.00 tax incl.
BDT 820.00 tax incl.
BDT 0.00 Tax
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 0.00 Tax
BDT 820.00 tax incl.
More
In-Stock
In stock: 15
Jumper Wire housing 7 Pin Robotics Bangladesh Quick view

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5
TTP223 Capacitive Touch switch Digital Touch Sensor Module For Arduino Robotics Bangladesh Quick view

Reference: RBD-1347

TTP223 Capacitive Touch switch Digital Touch Sensor Module For Arduino

(0)
TTP223 Capacitive Touch switch Digital Touch Sensor Module for Arduino UNO DUE MEGA TTP223 capacitive touch single IC. Onboard level indicator. Working voltage: 2.0V to 5.5V.
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 53
85mm Antiskid Shockproof Wheels High Quality Robotics Bangladesh Quick view

Reference: RBD-0749

85mm Antiskid Shockproof Wheels High Quality

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 137
Heart Rate Pulse Sensor Pulsesensor Sensor Module For Arduino Quick view

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 309.00
BDT 309.00 tax incl.
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 309.00 tax incl.
BDT 309.00 tax incl.
BDT 0.00 Tax
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 0.00 Tax
BDT 309.00 tax incl.
More
In-Stock
In stock: 100
Jumper Wire housing 8 Pin Robotics Bangladesh Quick view

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8
Back to top

Follow us on Facebook

Facebook