• Banner

    TEA5767 Stereo FM Radio Module with Detachable Antenna Robotics Bangladesh
    • TEA5767 Stereo FM Radio Module with Detachable Antenna Robotics Bangladesh
    • TEA5767 Stereo FM Radio Module with Detachable Antenna Robotics Bangladesh

    TEA5767 Stereo FM Radio Module with Detachable Antenna

    RBD-2212

    • Directly plug antenna interface.
    • I2C bus communication.
    • Multi-capacitor combined filter.
    • Blue LED power indicator.
    • High sensitivity(low noise RF input amplifier).
    • High power auto gains control AGC circuit.
    BDT 950
    BDT 950 BDT 950 BDT 950 BDT 950
    Tax excluded Tax includedTax excludedTax includedTax excluded
    BDT 950 Tax excluded
    BDT 950 Tax included
    BDT 0 Tax
    BDT 950 Tax excluded
    BDT 0 Tax
    BDT 950 Tax included
    Quantity
    In-Stock
    20 Items

    11 people have purchased this item
    20 items in stock
    Description

    TEA5767 Stereo FM Radio Module with Detachable Antenna is made using TEA5767, a single-chip electronically tuned stereo FM radio for low voltage applications. It has fully integrated Intermediate Frequency (IF) selectivity and FM demodulator.

    The radio is completely adjustment-free and is very easy to use as it requires only minimum external components. This module can be tuned to many FM bands and it can be easily interfaced with Arduino Boards, Raspberry Pi, and Microcontrollers via the I2C interface.

    The Module has reverse polarity protection diode and power output filtering sensor. It can be Directly plugged to the antenna interface. Additionally, it has a Multi capacitor combined filter and Blue LED power indicator for On-Off status.. Featured By RoboticsBD.

    Product Images are shown for illustrative purposes only and may differ from the actual product.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Features:

    1. With reverse polarity protection diode.
    2. With a power output filtering sensor.
    3. Directly plug antenna interface.
    4. I2C bus communication.
    5. Multi-capacitor combined filter.
    6. Blue LED power indicator.
    7. FM chip module TEA5767.
    8. Onboard 3.5mm audio interface.
    9. If connects with single-chip, only connect the Power Ground and two I2C communication cable.
    10. LC harmonic oscillator uses a low cost fixed chip.
    11. No need to adjust Intermediate frequency.
    12. High sensitivity(low noise RF input amplifier).
    13. High power auto gains control AGC circuit.
    14. Soft Mute.3.5mm jack for external Antenna.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Applications:

    1. This FM radio module is ideal for use in various types of audio and entertainment applications, including portable radios, music players, and home audio systems.
    2. It can be used to receive and play FM radio broadcasts, allowing users to access a wide range of audio content.
    3. This FM radio module is suitable for use in hobbyist and DIY electronics projects, as well as for educational and research purposes.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    General Specification
    ModelTEA5767
    Input Supply voltage (V)5
    Frequency Range (MHz)76 ~ 108
    Communication interfaceI2C
    Antenna Jack (mm)3.5
    Antenna can extend (cm)25
    PCB DimensionsAs per below
    Length (mm)41
    Width (mm)30.5
    Height (mm)8.5
    Weight (gm)6
    Shipment Weight0.01 kg
    Shipment Dimensions5 × 4 × 1 cm

    Please allow 5% measuring deviation due to manual measurement.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Package Includes:

    1 x TEA5767 Stereo FM Radio Module with Detachable Antenna

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Product Details
    RBD-2212
    20 Items

    Specific References

    EAN13
    2212
    Comments (0)
    Grade
    No customer reviews for the moment.
    16 other products in the same category:
    AD9850 DDS Signal Generator Module Robotics Bangladesh AD9850 DDS Signal Generator Module Robotics Bangladesh

    Reference: RBD-2207

    AD9850 DDS Signal Generator Module

    (0)
    2 sine wave and 2 square wave output. AD9850: 0-40MHz. After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean. Low-pass filter with 70MHz, so the waveform better than SN. Parallel and serial data input can be selected via a jumper.
    BDT 2,250
    BDT 2,250 tax incl.
    BDT 2,250 tax excl.
    BDT 2,250 tax excl.
    BDT 2,250 tax incl.
    BDT 2,250 tax incl.
    BDT 0 Tax
    BDT 2,250 tax excl.
    BDT 2,250 tax excl.
    BDT 0 Tax
    BDT 2,250 tax incl.
    More AD9850 DDS Signal Generator Module
    In-Stock
    In stock: 24
    High Power 600W MOSFET Trigger Switch Driver Module with PWM Regulation Robotics Bangladesh High Power 600W MOSFET Trigger Switch Driver Module with PWM Regulation Robotics Bangladesh

    Reference: RBD-3105

    High Power 600W MOSFET Trigger Switch Driver Module with PWM Regulation

    (0)
    600W MOSFET trigger switch driver module with PWM regulation Supports DC 4V–60V input and continuous 10A current (15A with cooling) Multiple trigger methods: high-level, low-level, PWM, and switch control Compatible with single-chip IO, PLC interfaces, and DC power supplies Ideal for controlling motors, LEDs, solenoids, pumps, and other high-power loads...
    BDT 450
    BDT 450 tax incl.
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 450 tax incl.
    BDT 450 tax incl.
    BDT 0 Tax
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 0 Tax
    BDT 450 tax incl.
    More High Power 600W MOSFET Trigger Switch Driver Module with PWM Regulation
    In-Stock
    In stock: 48
    HLK-V20 Speech Recognition Module Human Speech Voice Control Module Robotics Bangladesh HLK-V20 Speech Recognition Module Human Speech Voice Control Module Robotics Bangladesh

    Reference: RBD-1772

    Brand: Hi-Link

    HLK-V20 Speech Recognition Module Human Speech Voice Control Module

    (0)
    Small size package Local voice Customized voice wake-up/command words Universal Serial Port Protocol Support Chinese and English The number of command words reaches 150
    BDT 1,550
    BDT 1,550 tax incl.
    BDT 1,550 tax excl.
    BDT 1,550 tax excl.
    BDT 1,550 tax incl.
    BDT 1,550 tax incl.
    BDT 0 Tax
    BDT 1,550 tax excl.
    BDT 1,550 tax excl.
    BDT 0 Tax
    BDT 1,550 tax incl.
    More HLK-V20 Speech Recognition Module Human Speech Voice Control Module
    In-Stock
    In stock: 4
    4 Channel 5V Relay Board Module Robotics Bangladesh

    Reference: RBD-0409

    4 Channel 5V Relay Board Module

    (0)
    No. of Channel: 4 Trigger Voltage: 5VDC Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for the avoidance of malfunction Power supply indicator and Control indicator lamp Power supply and relay instructions, lit, the disconnect is off; The input signal, signal, common Terminal and start conducting; RoboticsBD Note:...
    BDT 258
    BDT 258 tax incl.
    BDT 258 tax excl.
    BDT 258 tax excl.
    BDT 258 tax incl.
    BDT 258 tax incl.
    BDT 0 Tax
    BDT 258 tax excl.
    BDT 258 tax excl.
    BDT 0 Tax
    BDT 258 tax incl.
    More 4 Channel 5V Relay Board Module
    In-Stock
    In stock: 52
    NeoPixel 5050 WS2812B 1Bit RGB LED with Integrated Driver Robotics Bangladesh

    Reference: RBD-2323

    NeoPixel 5050 WS2812B 1Bit RGB LED with Integrated Driver

    (0)
    NeoPixel WS2812B 5050 RGB LED Module with integrated smart driver Produces 24-bit true-color display with over 16 million colors Daisy-chain multiple modules with a single microcontroller data signal Compatible with Arduino, STM32, 51, and other microcontrollers Compact 14mm x 12mm module with bright and consistent 5050 LEDs
    BDT 40
    BDT 40 tax incl.
    BDT 40 tax excl.
    BDT 40 tax excl.
    BDT 40 tax incl.
    BDT 40 tax incl.
    BDT 0 Tax
    BDT 40 tax excl.
    BDT 40 tax excl.
    BDT 0 Tax
    BDT 40 tax incl.
    More NeoPixel 5050 WS2812B 1Bit RGB LED with Integrated Driver
    In-Stock
    In stock: 72
    CP2112 Debug Board USB to I2C Communication Module Robotics Bangladesh

    Reference: RBD-3046

    CP2112 Debug Board USB to I2C Communication Module

    (0)
    CP2112 USB to I2C communication module with HID USB interface Provides fast USB-to-SMBus/I2C connectivity without custom drivers Includes 8 configurable GPIOs with input/output and open-drain/push-pull modes Integrated on-chip voltage regulator and power-on reset circuit Cross-platform support with Windows, Mac, and Linux HID-to-SMBus libraries Compact...
    BDT 650
    BDT 650 tax incl.
    BDT 650 tax excl.
    BDT 650 tax excl.
    BDT 650 tax incl.
    BDT 650 tax incl.
    BDT 0 Tax
    BDT 650 tax excl.
    BDT 650 tax excl.
    BDT 0 Tax
    BDT 650 tax incl.
    More CP2112 Debug Board USB to I2C Communication Module
    In-Stock
    In stock: 15
    1 Channel 5V 30A Relay Control Board Module Robotics Bangladesh

    Reference: RBD-2659

    1 Channel 5V 30A Relay Control Board Module

    (0)
    1-channel 5V relay module with 30A switching capacity for high-power applications Optical coupling isolation ensures strong anti-interference and stable performance Supports both high-level and low-level trigger modes via jumper selection Compatible with Arduino, AVR, PIC, ARM, and other 5V microcontrollers Built-in power (red) and relay status (blue)...
    BDT 330
    BDT 330 tax incl.
    BDT 330 tax excl.
    BDT 330 tax excl.
    BDT 330 tax incl.
    BDT 330 tax incl.
    BDT 0 Tax
    BDT 330 tax excl.
    BDT 330 tax excl.
    BDT 0 Tax
    BDT 330 tax incl.
    More 1 Channel 5V 30A Relay Control Board Module
    In-Stock
    In stock: 22
    On sale! 4 Channel 12V Relay Board Module Robotics Bangladesh 4 Channel 12V Relay Board Module Robotics Bangladesh

    Reference: RBD-1400

    4 Channel 12V Relay Board Module

    (0)
    4-Channel Relay interface board and each one needs 15-20mA Driver Current. Both controlled by 12V and 5V input Voltage. Equipped with high-current relay, AC250V 10A ; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low). Indication LED’s for Relay output...
    BDT 298
    BDT 298 tax incl.
    BDT 298 tax excl.
    BDT 298 tax excl.
    BDT 298 tax incl.
    BDT 298 tax incl.
    BDT 0 Tax
    BDT 298 tax excl.
    BDT 298 tax excl.
    BDT 0 Tax
    BDT 298 tax incl.
    More 4 Channel 12V Relay Board Module
    In-Stock
    In stock: 87
    Full-Color RGB SMD Led Module Robotics Bangladesh

    Reference: RBD-1302

    Full-Color RGB SMD Led Module

    (0)
    Using 5050 full color LED RGB tricolor current-limiting resistance to prevent burn out Through the PWM adjusting three primary colors can be mixed to obtain different colors With a variety of single-chip interface Working voltage: 5V LED drive mode: Common cathode driver
    BDT 70
    BDT 70 tax incl.
    BDT 70 tax excl.
    BDT 70 tax excl.
    BDT 70 tax incl.
    BDT 70 tax incl.
    BDT 0 Tax
    BDT 70 tax excl.
    BDT 70 tax excl.
    BDT 0 Tax
    BDT 70 tax incl.
    More Full-Color RGB SMD Led Module
    In-Stock
    In stock: 58

    Reference: RBD-0439

    Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

    (0)
    Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Modulation Mode: GFSK (Gaussian Frequency Shift Keying) Transmitting Power: ≤4dBm Sensitivity: ≤-84dBm at 0.1% BER It’s easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baud rate....
    BDT 465 BDT 470
    BDT 470 BDT 465 tax incl.
    BDT 470 BDT 465 tax excl.
    BDT 470 BDT 465 tax excl.
    BDT 470 BDT 465 tax incl.
    BDT 470 BDT 465 tax incl.
    BDT 0 BDT 0 Tax
    BDT 470 BDT 465 tax excl.
    BDT 470 BDT 465 tax excl.
    BDT 0 BDT 0 Tax
    BDT 470 BDT 465 tax incl.
    More Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module
    In-Stock
    In stock: 11
    SIM800A Wireless Module GSM/GPRS/SMS Robotics Bangladesh

    Reference: RBD-3744

    SIM800A Wireless Module GSM/GPRS/SMS

    (0)
    The SIM800A Wireless Module is a compact, industrial-grade GSM/GPRS communication module that supports quad-band GSM900/1800MHz operation. It provides reliable GSM voice, SMS, and GPRS data transmission, making it ideal for a wide range of remote communication and IoT applications. This module is optimized with an efficient power design, ESD protection,...
    BDT 1,090
    BDT 1,090 tax incl.
    BDT 1,090 tax excl.
    BDT 1,090 tax excl.
    BDT 1,090 tax incl.
    BDT 1,090 tax incl.
    BDT 0 Tax
    BDT 1,090 tax excl.
    BDT 1,090 tax excl.
    BDT 0 Tax
    BDT 1,090 tax incl.
    More SIM800A Wireless Module GSM/GPRS/SMS
    In stock
    In stock: 67
    X9C103S Digital Potentiometer Module for Arduino Robotics Bangladesh

    Reference: RBD-0410

    X9C103S Digital Potentiometer Module for Arduino

    (0)
    Supply voltage: 6V-15V Chip: X9C103S Dimensions : 28 x 14 x 4 (LxWxH) mm. RoboticsBD 10K span potentiometer. Potentiometer center tap between the 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)
    BDT 350
    BDT 350 tax incl.
    BDT 350 tax excl.
    BDT 350 tax excl.
    BDT 350 tax incl.
    BDT 350 tax incl.
    BDT 0 Tax
    BDT 350 tax excl.
    BDT 350 tax excl.
    BDT 0 Tax
    BDT 350 tax incl.
    More X9C103S Digital Potentiometer Module for Arduino
    In-Stock
    In stock: 31
    MicroSD Card Module Robotics Bangladesh

    Reference: RBD-2759

    MicroSD Card Module

    (0)
    MicroSD card module for reading and writing data Operates at 3.3V logic, SPI bus compatible Ideal for data logging and large data storage projects Requires level shifters when used with 5V MCUs (e.g., Arduino Uno) Typical current draw: 15–30mA (read), up to 100mA (write) Compact and easy to integrate with Arduino, STM32, and ESP32
    BDT 90
    BDT 90 tax incl.
    BDT 90 tax excl.
    BDT 90 tax excl.
    BDT 90 tax incl.
    BDT 90 tax incl.
    BDT 0 Tax
    BDT 90 tax excl.
    BDT 90 tax excl.
    BDT 0 Tax
    BDT 90 tax incl.
    More MicroSD Card Module
    In-Stock
    In stock: 64
    NAU7802 24-Bit ADC Breakout – High-Precision Wheatstone Bridge Sensor Interface, STEMMA QT / Qwiic Robotics Bangladesh NAU7802 24-Bit ADC Breakout – High-Precision Wheatstone Bridge Sensor Interface, STEMMA QT / Qwiic Robotics Bangladesh

    Reference: RBD-3726

    NAU7802 24-Bit ADC Breakout – High-Precision Wheatstone Bridge Sensor Interface, STEMMA QT / Qwiic

    (0)
    The NAU7802 24-bit ADC module is a high-resolution differential analog-to-digital converter designed for precise measurement applications. With built-in gain and calibration circuitry, it is especially well-suited for use with strain gauges, load cells, and Wheatstone bridge sensors.
    BDT 1,440
    BDT 1,440 tax incl.
    BDT 1,440 tax excl.
    BDT 1,440 tax excl.
    BDT 1,440 tax incl.
    BDT 1,440 tax incl.
    BDT 0 Tax
    BDT 1,440 tax excl.
    BDT 1,440 tax excl.
    BDT 0 Tax
    BDT 1,440 tax incl.
    More NAU7802 24-Bit ADC Breakout – High-Precision Wheatstone Bridge Sensor Interface, STEMMA QT / Qwiic
    In stock
    In stock: 10
    WS2812B RGB LED 8 Bit Ring Robotics Bangladesh

    Reference: RBD-2305

    WS2812B RGB LED 8 Bit Ring

    (0)
    WS2812B RGB LED 8-Bit Ring with individually addressable LEDs Features 8 WS2812 5050 RGB LEDs in a compact 32mm outer diameter circular board Constant current drive (~18mA per LED) for consistent brightness at 5V Requires a microcontroller with an 8MHz or faster processor for precise control Equipped with solder pads and mounting holes for easy integration
    BDT 170
    BDT 170 tax incl.
    BDT 170 tax excl.
    BDT 170 tax excl.
    BDT 170 tax incl.
    BDT 170 tax incl.
    BDT 0 Tax
    BDT 170 tax excl.
    BDT 170 tax excl.
    BDT 0 Tax
    BDT 170 tax incl.
    More WS2812B RGB LED 8 Bit Ring
    In-Stock
    In stock: 51
    Mini ENC28J60 Ethernet LAN Network Module For Arduino Robotics Bangladesh

    Reference: RBD-1137

    Mini ENC28J60 Ethernet LAN Network Module For Arduino

    (0)
    Fully Compatible with 10/100/1000Base-T Networks Integrated MAC and 10Base-T PHY Supports One 10Base-T Port with Automatic Polarity Detection and Correction Supports Full and Half-Duplex modes Programmable Automatic Retransmit on Collision Programmable Automatic Rejection of Erroneous Packets SPI Interface with Clock Speeds Up to 20 MHz For Arduino, SPI,...
    BDT 850
    BDT 850 tax incl.
    BDT 850 tax excl.
    BDT 850 tax excl.
    BDT 850 tax incl.
    BDT 850 tax incl.
    BDT 0 Tax
    BDT 850 tax excl.
    BDT 850 tax excl.
    BDT 0 Tax
    BDT 850 tax incl.
    More Mini ENC28J60 Ethernet LAN Network Module For Arduino
    In-Stock
    In stock: 90
    You might also like
    DY-SV5W Audio Playback MP3 Module Robotics Bangladesh DY-SV5W Audio Playback MP3 Module Robotics Bangladesh

    Reference: RBD-2039

    DY-SV5W Audio Playback MP3 Module

    (0)
    Product Name:DY-SV5W Voice Playback Module Product Number:DY-SV5W Work Voltage:DC 5V Working Temperature range:-20℃~85℃ Working Humidity range:0%-95%RH Size :35*35*4.5mm
    BDT 750
    BDT 750 tax incl.
    BDT 750 tax excl.
    BDT 750 tax excl.
    BDT 750 tax incl.
    BDT 750 tax incl.
    BDT 0 Tax
    BDT 750 tax excl.
    BDT 750 tax excl.
    BDT 0 Tax
    BDT 750 tax incl.
    More DY-SV5W Audio Playback MP3 Module
    In-Stock
    In stock: 25
    JQ6500 HW-896 V1.2 Voice Sound MP3 Player Module Robotics Bangladesh JQ6500 HW-896 V1.2 Voice Sound MP3 Player Module Robotics Bangladesh

    Reference: RBD-2065

    JQ6500 HW-896 V1.2 Voice Sound MP3 Player Module

    (0)
    Play standard mono or stereo MP3 files Control with buttons Serial communications protocol (JQ6500 Arduino Library available). Power supply 4.2V Speaker power 4 ohms / 3 watts
    BDT 390
    BDT 390 tax incl.
    BDT 390 tax excl.
    BDT 390 tax excl.
    BDT 390 tax incl.
    BDT 390 tax incl.
    BDT 0 Tax
    BDT 390 tax excl.
    BDT 390 tax excl.
    BDT 0 Tax
    BDT 390 tax incl.
    More JQ6500 HW-896 V1.2 Voice Sound MP3 Player Module
    In-Stock
    In stock: 5
    PAM8406 5Wx2 Class D Digital Stereo Audio Power Amplifier Module Board Robotics Bangladesh

    Reference: RBD-1021

    PAM8406 5Wx2 Class D Digital Stereo Audio Power Amplifier Module Board

    (0)
    Operating voltage: 2.5V-5.5V, recommended 5V Speaker Load: 2-8 Ohms Input and Output Connectors: Pins on 0.2" centers Size: 24 x 23 x 105 mm (L x W x H) Net weight: 3g
    BDT 199
    BDT 199 tax incl.
    BDT 199 tax excl.
    BDT 199 tax excl.
    BDT 199 tax incl.
    BDT 199 tax incl.
    BDT 0 Tax
    BDT 199 tax excl.
    BDT 199 tax excl.
    BDT 0 Tax
    BDT 199 tax incl.
    More PAM8406 5Wx2 Class D Digital Stereo Audio Power Amplifier Module Board
    In-Stock
    In stock: 97
    USBTiny AVR ISP Programmer Bootloader For Arduino IDE Robotics Bangladesh USBTiny AVR ISP Programmer Bootloader For Arduino IDE Robotics Bangladesh

    Reference: RBD-1104

    USBTiny AVR ISP Programmer Bootloader For Arduino IDE

    (0)
    Isp interface: 6 PIN Isp interface: 10 PIN Power supply options: USB power Power supply options: external power supply (remove jumper cap)
    BDT 900
    BDT 900 tax incl.
    BDT 900 tax excl.
    BDT 900 tax excl.
    BDT 900 tax incl.
    BDT 900 tax incl.
    BDT 0 Tax
    BDT 900 tax excl.
    BDT 900 tax excl.
    BDT 0 Tax
    BDT 900 tax incl.
    More USBTiny AVR ISP Programmer Bootloader For Arduino IDE
    In-Stock
    In stock: 7
    WT588D Audio Wi-Fi Receiver Voice Sound Audio Player Module Robotics Bangladesh

    Reference: RBD-2218

    WT588D Audio Wi-Fi Receiver Voice Sound Audio Player Module

    (0)
    Module package (with FLASH memory and peripheral circuits) have DIP16, DIP28, chip packaging has DIP18, SSOP20, and LQFP32 form. Built 13Bit/DA converter, and 12Bit/PWM output. PWM output can directly drive 0.5W/8Ω speakers, push-pull current abundant support DAC / PWM output of two ways. Support for loading WAV audio formats. USB download mode, support...
    BDT 450
    BDT 450 tax incl.
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 450 tax incl.
    BDT 450 tax incl.
    BDT 0 Tax
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 0 Tax
    BDT 450 tax incl.
    More WT588D Audio Wi-Fi Receiver Voice Sound Audio Player Module
    In-Stock
    In stock: 19

    Follow us on Facebook