Banner

Fulree F35J5V10A5L 5V 10A DC-DC Buck Power Converter

Reference RBD-3201

Fulree F35J5V10A5L DC-DC Buck Converter provides 5V 10A (50W) stable output.
Wide input range: 10V–35V DC, suitable for automotive and industrial use.
High efficiency >93% ensures minimal power loss.
IP68 waterproof enclosure for outdoor or harsh environments.
Built-in overcurrent, overheat, and short-circuit protection.
Ideal for vehicles, renewable energy, IoT, and industrial power systems.

Description
Product Details

Description

The Fulree F35J5V10A5L 5V 10A DC-DC Buck Power Converter is a high-performance, waterproof voltage regulator designed for reliable 5V power delivery in demanding environments. With a wide 10–35V input range, it efficiently converts voltage for automotive, solar, and industrial applications. Its >93% conversion efficiency, IP68-rated housing, and multiple protection features ensure dependable operation with minimal heat and noise. Compact and rugged, this converter is ideal for powering dash cameras, GPS modules, sensors, controllers, and IoT devices that require a consistent 5V supply. Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Features:

High Efficiency: Converts DC 10–35V input to 5V output with >93% efficiency.
High Output Power: Supports up to 10A load current (50W maximum output).
Stable Regulation: Maintains precise voltage even under load variation.
Rugged Design: Encased in IP68 waterproof housing for outdoor or automotive use.
Built-in Protection: Safeguards against overcurrent, overheating, and short circuits.
Silent Operation: Uses passive air convection for cooling—no fans required.
Compact and Lightweight: Measures only 74 x 74 x 32 mm for easy mounting.
Wide Compatibility: Works with 12V/24V vehicle systems and industrial setups.
Extended Temperature Range: Operates reliably from -40°C to +80°C.
Easy Installation: Simple wiring and automatic voltage adjustment on power-up.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Applications:

Automotive Electronics: Powers car accessories like GPS, dashcams, and DVRs.
Industrial Control Systems: Supplies 5V to sensors, PLCs, and controllers.
Renewable Energy Systems: Converts solar or wind power for 5V devices.
IoT Projects: Provides stable DC output for Wi-Fi modules and edge devices.
Marine or Outdoor Equipment: Waterproof design suitable for boats and field instruments.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

General Specifications
Model	Fulree F35J5V10A5L
Input Voltage Range	DC 10V – 35V
Output Voltage	DC 5V
Output Current	10A
Output Power	50W
Conversion Efficiency	>93%
Ripple	<150mV
No-load Current	<100mA
Waterproof Rating	IP68
Cooling Method	Passive (air convection)
Operating Temperature	-40°C to +80°C
Dimensions	74 × 74 × 32 mm
Protection Features	Overcurrent, overheat, short-circuit
Applications	Automotive, solar, industrial, IoT
Shipping Weight	0.2205 kg
Shipping Dimensions	9 × 8 × 4 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Documentation:

How to Use:

Connection:

Connect the input cables to a DC power source within the 10-35V range.
Connect the output cables to your device requiring a 5V power supply.

Installation:

Mount the device in a secure location, ensuring proper airflow or external heat dissipation if used in high temperatures.

Operation:

Once connected, the converter will automatically adjust the input voltage to maintain a stable 5V output.

Package Includes:

1 x Fulree F35J5V10A5L 5V 10A DC-DC Buck Power Converter

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Product Details

Reference RBD-3201

In stock 12 Items

Specific References

EAN13: 3201

Comments (0)

Grade

No customer reviews for the moment.

16 other products in the same category:

Reference: RBD-3306

EGS031/032 Three-Phase Pure Sine Wave Inverter Module

(0)

Three-phase pure sine wave inverter module powered by EG8030 control chip. Converts DC power into a stable, high-efficiency AC output. Tested up to 2000W output capacity, ideal for industrial and commercial use. Requires external power backplane and three-phase transformer for operation. Ultra-low power consumption: 2mA (idle), 0.7mA (disable mode)....

BDT 1,950

BDT 1,950 tax incl.

BDT 1,950 tax excl.

BDT 1,950 tax incl.

BDT 0 Tax

BDT 1,950 tax excl.

BDT 0 Tax

BDT 1,950 tax incl.

In-Stock

In stock: 5

Official Power Supply for Raspberry Pi 4 (White) Robotics Bangladesh

Reference: RBD-1596

Brand: Raspberry Pi Official

Official Power Supply for Raspberry Pi 4 (White)

(0)

Good Quality material 96-230Vac operating input range 50,000 hours MTBF Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi

BDT 1,450

BDT 1,450 tax incl.

BDT 1,450 tax excl.

BDT 1,450 tax incl.

BDT 0 Tax

BDT 1,450 tax excl.

BDT 0 Tax

BDT 1,450 tax incl.

In-Stock

In stock: 33

Sold-out

Reference: RBD-0494

Actiontec Genuine 12V 2A AC Adapter

(0)

Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 12V 2A. Input Plug: 2-Pin USA type. Output Plug: 5.5mm DC plug. RoboticsBD Model: STD-120200

BDT 650

BDT 650 tax incl.

BDT 650 tax excl.

BDT 650 tax incl.

BDT 0 Tax

BDT 650 tax excl.

BDT 0 Tax

BDT 650 tax incl.

Sold-out

In stock: 0

- BDT 100 Reduced price

Reference: RBD-1853

Adapter DC 5V 2A 2.1mm Barrel Jack Adapter

(0)

Suitable for Arduino, DIY & Hobby Kits, and 5V Home Appliances. Rated Input AC Voltage 100v-240v It comes with a 1 meter long 24 AWG cable Stabilized DC Output with Low Ripples & Interference Short Circuit & Overload Protection High Efficiency & Low Energy Consumption RoHS and BIS compliance Approved.

BDT 300 BDT 400

BDT 400 BDT 300 tax incl.

BDT 400 BDT 300 tax excl.

BDT 400 BDT 300 tax incl.

BDT 0 BDT 0 Tax

BDT 400 BDT 300 tax excl.

BDT 0 BDT 0 Tax

BDT 400 BDT 300 tax incl.

In-Stock

In stock: 10

Reference: RBD-2449

LM2577 Adjustable DC-DC Boost Module

(0)

LM2577 adjustable step-up (boost) converter module Input voltage: 3.5V – 35V, Output voltage: 5V – 56V Delivers up to 2A output current (power 9W – 45W depending on setup) Built-in current and thermal limiting for safe operation Compact design with onboard power indicator LED Ideal for DIY electronics, robotics, battery-powered projects, and prototyping

BDT 390

BDT 390 tax incl.

BDT 390 tax excl.

BDT 390 tax incl.

BDT 0 Tax

BDT 390 tax excl.

BDT 0 Tax

BDT 390 tax incl.

In-Stock

In stock: 47

Reference: RBD-3145

4S1P 14.8V 18650 Battery Holder with PCM Protection Circuit Module

(0)

4S1P 18650 battery holder with built-in PCM protection circuit for 14.8V output Protects against overcharge, over-discharge, over-current, and short circuits Holds four 18650 Li-ion cells in series for stable, high-performance power delivery Made from durable PC material for safety and long-term reliability Compact design ideal for DIY battery packs,...

BDT 1,550

BDT 1,550 tax incl.

BDT 1,550 tax excl.

BDT 1,550 tax incl.

BDT 0 Tax

BDT 1,550 tax excl.

BDT 0 Tax

BDT 1,550 tax incl.

In-Stock

In stock: 10

Reference: RBD-2673

Universal Regulated DC Switching Power Supply 24V 600W MS-600-24

(0)

Universal regulated DC switching power supply, 24V 600W output Delivers 25A high current with ±1% voltage accuracy and ±0.5% load stability Dual AC input range (110V / 220V) with switch selection for flexibility Built-in cooling fan and ventilation holes for reliable heat dissipation Features overload protection, soft-start current, and full-load burn-in...

BDT 5,900

BDT 5,900 tax incl.

BDT 5,900 tax excl.

BDT 5,900 tax incl.

BDT 0 Tax

BDT 5,900 tax excl.

BDT 0 Tax

BDT 5,900 tax incl.

In-Stock

In stock: 9

- BDT 15 Reduced price

Reference: RBD-0988

18650 Battery Holder 3S with wire

(0)

Hold 3 standard 18650 batteries. Wire Length: 15 cm. Output: 11.1 V. Dimension (Appro.) : 76 x 60 x 18 mm. Weight: 18 gm. High-quality plastic material

BDT 75 BDT 90

BDT 90 BDT 75 tax incl.

BDT 90 BDT 75 tax excl.

BDT 90 BDT 75 tax incl.

BDT 0 BDT 0 Tax

BDT 90 BDT 75 tax excl.

BDT 0 BDT 0 Tax

BDT 90 BDT 75 tax incl.

In-Stock

In stock: 111

Sold-out

Reference: RBD-2624

5V 1.5A AC-DC Adapter 2.1mm Connector

(0)

Reliable 5V 1.5A power for electronics like Raspberry Pi, Arduino, and more. Works globally with 110-240V AC input voltage. Small size and lightweight design for easy storage and travel. Features multiple protections and high efficiency for safe and reliable operation. Ideal for DIY projects, development boards, routers, and various devices.

BDT 320

BDT 320 tax incl.

BDT 320 tax excl.

BDT 320 tax incl.

BDT 0 Tax

BDT 320 tax excl.

BDT 0 Tax

BDT 320 tax incl.

Sold-out

In stock: 0

Reference: RBD-0730

DC-DC Boost Module XL6009

(0)

The performance is much higher than LM2577. Non-isolated Boost converter. It has a non-synchronous rectifier. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v;

BDT 83

BDT 83 tax incl.

BDT 83 tax excl.

BDT 83 tax incl.

BDT 0 Tax

BDT 83 tax excl.

BDT 0 Tax

BDT 83 tax incl.

In-Stock

In stock: 169

Reference: RBD-3479

WM-045 Adjustable Voltage Regulator, Power Supply Module - 150W, 10A

(0)

WM-045 Adjustable Voltage Regulator 150W 10A buck-boost module Wide input range: 5V – 30V DC Adjustable output: 1.25V – 30V DC Maximum 10A output current, up to 150W power High efficiency up to 90% with low ripple (200mVp-p) Ideal for battery charging, LED drivers, lab power & DIY projects

BDT 1,080

BDT 1,080 tax incl.

BDT 1,080 tax excl.

BDT 1,080 tax incl.

BDT 0 Tax

BDT 1,080 tax excl.

BDT 0 Tax

BDT 1,080 tax incl.

In-Stock

In stock: 14

Reference: RBD-3290

LM2596S Step-Down Constant Current Voltage Driver Module - 3A

(0)

LM2596S DC-DC buck converter with both constant voltage and constant current modes. Supports wide input range (4.5V–40V) and adjustable output (1.2V–37V). Provides current regulation (100mA–3A) suitable for LED driving and battery charging. High efficiency up to 92% with low ripple (~30mV) for stable performance. Includes over-temperature, over-current,...

BDT 250

BDT 250 tax incl.

BDT 250 tax excl.

BDT 250 tax incl.

BDT 0 Tax

BDT 250 tax excl.

BDT 0 Tax

BDT 250 tax incl.

In-Stock

In stock: 41

Reference: RBD-0623

DC-DC 9V/12V/24V to 5V USB Step Down Power Module 2A

(0)

Input voltage range: 6-26V Output voltage: 5.2V (consider the charge line loss, the output is 5.2V or so, the load side is about 5V) Output current: 3A (in the absence of a heat sink device, the stable output current is 2A) Two output Port can charge two devices simultaneously. RoboticsBD

BDT 400

BDT 400 tax incl.

BDT 400 tax excl.

BDT 400 tax incl.

BDT 0 Tax

BDT 400 tax excl.

BDT 0 Tax

BDT 400 tax incl.

In-Stock

In stock: 7

Reference: RBD-3287

XL6009 DC-DC Buck Boost Power Module

(0)

High-efficiency DC-DC converter capable of both step-up (boost) and step-down (buck) operation. Supports wide input voltage range (5V–32V) and adjustable output (1.25V–35V). Features automatic buck-boost conversion with up to 94% efficiency. 4A integrated MOSFET switch for high current output and reliability. Operates at 400KHz switching frequency...

BDT 199

BDT 199 tax incl.

BDT 199 tax excl.

BDT 199 tax incl.

BDT 0 Tax

BDT 199 tax excl.

BDT 0 Tax

BDT 199 tax incl.

In-Stock

In stock: 73

Reference: RBD-2665

DC Buck Boost Power Module 5V-30V to 0.6V-30V 35W 4A CVCC Adjustable Step Up Down Converter with LCD Display

(0)

Wide input range: DC 5V–30V with adjustable output from 0.6V–30V Step-up & step-down functionality with CV/CC modes Clear LCD display showing voltage, current, power & status Built-in protections: overcurrent, overvoltage, overheating, short-circuit & reverse polarity Adjustable output current up to 4A with obstruction protection beyond 4A...

BDT 1,150

BDT 1,150 tax incl.

BDT 1,150 tax excl.

BDT 1,150 tax incl.

BDT 0 Tax

BDT 1,150 tax excl.

BDT 0 Tax

BDT 1,150 tax incl.

In-Stock

In stock: 15

Reference: RBD-2862

Load Battery Tester Terminal Adapter

(0)

Simplify battery testing! Connects to your load battery tester for easy connection of various devices with USB or DC power inputs. Supports Type-C, Micro-B, Mini-B USB ports and a barrel socket for universal compatibility. Handles a wide range of voltages (2-200V) and currents (0.

BDT 450

BDT 450 tax incl.

BDT 450 tax excl.

BDT 450 tax incl.

BDT 0 Tax

BDT 450 tax excl.

BDT 0 Tax

BDT 450 tax incl.

In-Stock

In stock: 13

Frequently purchased together
Products from the same category

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)

Choose your desire Resistor value from below:

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 771

Reference: RBD-0418

6.8 kOhm 1/4w Film Resistor - Pack of 10

(0)

Resistance:6.8 kOhm Tolerance: 5% Max. Working Voltage: 250V Temperature Coefficient of Resistance: 50PPM/°C

BDT 15

BDT 15 tax incl.

BDT 15 tax excl.

BDT 15 tax incl.

BDT 0 Tax

BDT 15 tax excl.

BDT 0 Tax

BDT 15 tax incl.

In-Stock

In stock: 4882

Reference: RBD-0652

Battery 9V

(0)

Constant 9V Output till lasts Metal Jacket Body Good Built Quality and hence Leakproof Easy to install and Replace Corrosion free Connector Point for long-term use 0% Mercury and Cadmium. Environment-friendly OEM Compatible. RoboticsBD

BDT 74

BDT 74 tax incl.

BDT 74 tax excl.

BDT 74 tax incl.

BDT 0 Tax

BDT 74 tax excl.

BDT 0 Tax

BDT 74 tax incl.

In-Stock

In stock: 311

Reference: RBD-0656

Female Pin Header Single Row 2.54mm

(0)

Single row. 2.54mm pitch. 1 x 40 pins. Through-hole mount.

BDT 15

BDT 15 tax incl.

BDT 15 tax excl.

BDT 15 tax incl.

BDT 0 Tax

BDT 15 tax excl.

BDT 0 Tax

BDT 15 tax incl.

In-Stock

In stock: 877

Reference: RBD-0732

9V Battery to 2.1mm for Arduino Uno

(0)

Excellent material It is an environmental 9V battery buckle The Cable Length: 12cm Approx. Convenient for connecting a battery to your application. Save power and protect the environment Good electrical conductivity and comfortable sense of touch

BDT 22

BDT 22 tax incl.

BDT 22 tax excl.

BDT 22 tax incl.

BDT 0 Tax

BDT 22 tax excl.

BDT 0 Tax

BDT 22 tax incl.

In-Stock

In stock: 487

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)

Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.

BDT 499

BDT 499 tax incl.

BDT 499 tax excl.

BDT 499 tax incl.

BDT 0 Tax

BDT 499 tax excl.

BDT 0 Tax

BDT 499 tax incl.

In-Stock

In stock: 68

Reference: RBD-0755

5 mm Green LED (Pack of 5)

(0)

Size: 5mm Color: Green Head Shape: Round Lens Appearance: Transparent

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 199

Reference: RBD-0761

Push Button Switch (2PIN)

(0)

Breadboard friendly Mounting Style: Through Hole Mounting Direction: Vertical

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 1126

150A High Precision Watt Meter and Power Analyzer Module

(0)

150A High Precision Watt Meter and Power Analyzer with real-time voltage, current, power, and energy readings. Monitors up to 150A and 60V, ideal for battery, solar, and motor testing. Backlit LCD display ensures clear visibility in any environment. Measures voltage, current, watts, amp-hours, and watt-hours with high accuracy. Compact, durable, and...

BDT 835

BDT 835 tax incl.

BDT 835 tax excl.

BDT 835 tax incl.

BDT 0 Tax

BDT 835 tax excl.

BDT 0 Tax

BDT 835 tax incl.

In-Stock

In stock: 9

Reference: RBD-3202

Fulree F35J5V20A5L 5V 20A DC-DC Buck Power Converter

(0)

Fulree F35J5V20A5L DC-DC Converter delivers 5V 20A (100W) regulated output. Wide input range: 10V–35V DC, suitable for automotive, solar, and industrial systems. High efficiency >93% for minimal energy loss and optimal performance. IP68 waterproof enclosure ensures reliable operation in outdoor and rugged environments. Built-in overcurrent, overheat,...

BDT 1,990

BDT 1,990 tax incl.

BDT 1,990 tax excl.

BDT 1,990 tax incl.

BDT 0 Tax

BDT 1,990 tax excl.

BDT 0 Tax

BDT 1,990 tax incl.

In-Stock

In stock: 18

Reference: RBD-3204

PMS Adapter Conversion Board GM1705 - 1.25T to 2.54 for PMS Sensors

(0)

PMS Adapter Board GM1705 converts 1.25T pitch to 2.54 pitch connectors. Compatible with PMS1003, PMS3003, PMS5003 and variants (G1, G3, G5, G7, G10). Simplifies sensor-to-microcontroller connections for air quality projects. Durable PCB with high-quality connectors ensures long-term reliability. Ideal for IoT, prototyping, and environmental monitoring...

BDT 290

BDT 290 tax incl.

BDT 290 tax excl.

BDT 290 tax incl.

BDT 0 Tax

BDT 290 tax excl.

BDT 0 Tax

BDT 290 tax incl.

In-Stock

In stock: 11

Reference: RBD-3205

TT Motor Bi-Metal Gearbox Double-Sided Axle with 1:90 Gear Ratio

(0)

TT Motor Bi-Metal Gearbox (1:90) designed for high-torque, low-speed robotics applications. Steel-reinforced gears offer superior strength and durability over standard TT motors. Double-sided axle for flexible integration into robotic frames and mechanisms. Operates within 3V–6V DC range, ideal for hobby and educational projects. Compatible with motor...

BDT 320

BDT 320 tax incl.

BDT 320 tax excl.

BDT 320 tax incl.

BDT 0 Tax

BDT 320 tax excl.

BDT 0 Tax

BDT 320 tax incl.

In-Stock

In stock: 48

Follow us on Facebook

Facebook

Fulree F35J5V10A5L 5V 10A DC-DC Buck Power Converter

Features:

Applications:

Documentation:

How to Use:

Package Includes:

Subscribe To When In Stock

Subscribe To When In Stock

Follow us on Facebook