• Banner

    TP4056 Lithium Battery Charger Module With Protection Dual Functions Robotics Bangladesh
    • TP4056 Lithium Battery Charger Module With Protection Dual Functions Robotics Bangladesh

    TP4056 Lithium Battery Charger Module With Protection Dual Functions

    RBD-0919

    • Dimension: 25 x 19 x 10 (LxWxH)mm.
    • Input interface: micro USB.
    • Current Protection: Yes
    • Charging mode: Linear charging.
    • Current: 1A adjustable.
    • Charge precision: 1.5%.
    • Input voltage: 4.5V-5.5V.
    • Full charge voltage: 4.2V.
    BDT 32
    BDT 32 BDT 32 BDT 32 BDT 32
    Tax excluded Tax includedTax excludedTax includedTax excluded
    BDT 32 Tax excluded
    BDT 32 Tax included
    BDT 0 Tax
    BDT 32 Tax excluded
    BDT 0 Tax
    BDT 32 Tax included
    Quantity
    In-Stock
    394 Items

    977 people have purchased this item
    31 people recently added this item to the cart
    394 items in stock
    Description

    This TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished. RoboticsBD

    Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time. Featured By RoboticsBD.

    Product Images are shown for illustrative purposes only and may differ from the actual product.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Using the module:
    1. Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
    2. Connect cell to charge to B+/B- pads on the right-hand side of the module.
    3. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
    4. Important! Disconnect load when charging
    5. The red LED indicates charging in progress, green LED indicates charging has finished.
    6. Never charge your battery at a rate greater than 1C.

    NOTE:

    1. Ampere meter can only be connected to a 5v input end of the module.
    2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
    3. The connection wire should not be too thick.
    4. Make sure the connect point is good.
    5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
    6. NO Reverse polarity.

    Features :

    1. Led indicator: red is charging Green is fully charged.
    2. Current Protection: Yes
    3. Inversed polarity: NO.
    4. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
    5. Fully machinery automated processing, all patch parts manufacturing.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    General Specification
    Charging accuracy (%)1.5
    Charging methodLinear
    Full Charge Voltage (V)4.2
    Over-Current Protection (A)3
    Under-Voltage Protection (V)2.5
    Input Voltage (V)4.5-5.5
    Rated Power (W)4.2
    Operating Temperature (°C)-10 to 85
    Length (mm)25
    Width (mm)20
    Height (mm)6
    Weight (gm)3
    Shipment Weight0.005 kg
    Shipment Dimensions3 × 2 × 1 cm

    Please allow 5% measuring deviation due to manual measurement.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Package Includes :

    1 x TP4056 Lithium Battery Charger Module With Protection Dual Functions.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Product Details
    RBD-0919
    394 Items

    Specific References

    EAN13
    0919
    Comments (0)
    Grade
    No customer reviews for the moment.
    16 other products in the same category:

    Reference: RBD-0337

    Brand: Waveshare

    Liquid Level Sensor for Arduino (WaveShare)

    (0)
    Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm
    BDT 449 BDT 499
    BDT 499 BDT 449 tax incl.
    BDT 499 BDT 449 tax excl.
    BDT 499 BDT 449 tax excl.
    BDT 499 BDT 449 tax incl.
    BDT 499 BDT 449 tax incl.
    BDT 0 BDT 0 Tax
    BDT 499 BDT 449 tax excl.
    BDT 499 BDT 449 tax excl.
    BDT 0 BDT 0 Tax
    BDT 499 BDT 449 tax incl.
    More Liquid Level Sensor for Arduino (WaveShare)
    In-Stock
    In stock: 18
    Smart Robot Chassis Kit Black 2WD Robotics Bangladesh Smart Robot Chassis Kit Black 2WD Robotics Bangladesh

    Reference: RBD-1601

    Smart Robot Chassis Kit Black 2WD

    (0)
    Smart Robot Chassis  Black 2WD DC Motor x2 Comes as a kit  Two Wheels Smart Car Chassis Tracking Best for Obstacle Avoidance Robot
    BDT 1,650
    BDT 1,650 tax incl.
    BDT 1,650 tax excl.
    BDT 1,650 tax excl.
    BDT 1,650 tax incl.
    BDT 1,650 tax incl.
    BDT 0 Tax
    BDT 1,650 tax excl.
    BDT 1,650 tax excl.
    BDT 0 Tax
    BDT 1,650 tax incl.
    More Smart Robot Chassis Kit Black 2WD
    In-Stock
    In stock: 17
    Pre-Order SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS0 Robotics Bangladesh SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS0 Robotics Bangladesh

    Reference: RBD-0233

    Brand: SparkFun Electronics

    SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS0

    (0)
    Description: This is the LSM9DS0, a versatile motion-sensing  system-in-a-chip that houses a 3-axis accelerometer, 3-axis  gyroscope, and 3-axis magnetometer. That’s right, 9 degrees  of freedom (9dof) from a single IC!
    BDT 2,700
    BDT 2,700 tax incl.
    BDT 2,700 tax excl.
    BDT 2,700 tax excl.
    BDT 2,700 tax incl.
    BDT 2,700 tax incl.
    BDT 0 Tax
    BDT 2,700 tax excl.
    BDT 2,700 tax excl.
    BDT 0 Tax
    BDT 2,700 tax incl.
    More SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS0
    Pre-Order
    In stock: 0

    Reference: RBD-0034

    Servo Motor MG996R 180 Degree Rotation

    (0)
    Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
    BDT 354 BDT 359
    BDT 359 BDT 354 tax incl.
    BDT 359 BDT 354 tax excl.
    BDT 359 BDT 354 tax excl.
    BDT 359 BDT 354 tax incl.
    BDT 359 BDT 354 tax incl.
    BDT 0 BDT 0 Tax
    BDT 359 BDT 354 tax excl.
    BDT 359 BDT 354 tax excl.
    BDT 0 BDT 0 Tax
    BDT 359 BDT 354 tax incl.
    More Servo Motor MG996R 180 Degree Rotation
    In-Stock
    In stock: 263
    L Shaped Servo Bracket Robotics Bangladesh L Shaped Servo Bracket Robotics Bangladesh

    Reference: RBD-2003

    L Shaped Servo Bracket

    (0)
    Servo L Bracket 2mm Hard aluminum  Sandblasting SurfaceMultifunctional Bracket Click here Long U Bracket Click here Short U Bracket Click here L-shaped Servo Bracket Click here Oblique U Servo Bracket Click here U Beam Servo Bracket Click here Humanoid Robot Feet Servo Bracket Click here One Word Frame Servo Bracket Click here Bearing for Servo Motor...
    BDT 70
    BDT 70 tax incl.
    BDT 70 tax excl.
    BDT 70 tax excl.
    BDT 70 tax incl.
    BDT 70 tax incl.
    BDT 0 Tax
    BDT 70 tax excl.
    BDT 70 tax excl.
    BDT 0 Tax
    BDT 70 tax incl.
    More L Shaped Servo Bracket
    In-Stock
    In stock: 54
    DC-5V-35V 5A PWM Motor Speed Controller Robotics Bangladesh

    Reference: RBD-1724

    DC-5V-35V 5A PWM Motor Speed Controller

    (0)
    Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.
    BDT 220
    BDT 220 tax incl.
    BDT 220 tax excl.
    BDT 220 tax excl.
    BDT 220 tax incl.
    BDT 220 tax incl.
    BDT 0 Tax
    BDT 220 tax excl.
    BDT 220 tax excl.
    BDT 0 Tax
    BDT 220 tax incl.
    More DC-5V-35V 5A PWM Motor Speed Controller
    In-Stock
    In stock: 10
    Jumper Wire Single 30cm Robotics Bangladesh

    Reference: 1353

    Jumper Wire Single 30cm

    (0)
    Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.
    BDT 5
    BDT 5 tax incl.
    BDT 5 tax excl.
    BDT 5 tax excl.
    BDT 5 tax incl.
    BDT 5 tax incl.
    BDT 0 Tax
    BDT 5 tax excl.
    BDT 5 tax excl.
    BDT 0 Tax
    BDT 5 tax incl.
    More Jumper Wire Single 30cm
    In-Stock
    In stock: 114
    Pack 3D Printed Robotics claw with servo motor Robotics Bangladesh 3D Printed Robotics claw with servo motor Robotics Bangladesh

    Reference: RBD-0268

    Brand: RoboticsBD

    3D Printed Robotics claw with servo motor

    (0)
    3D printed robot claw designed for MG995 / MG996R servo motors Compatible with standard M3 bolts and nuts for easy assembly Strong and simple geometry suitable for DIY robotics projects Ideal for beginners to prototype and customize claw mechanisms Lightweight yet durable design for robotic arms and grippers Easy to integrate with Arduino, ESP32, and...
    BDT 550
    BDT 550 tax incl.
    BDT 550 tax excl.
    BDT 550 tax excl.
    BDT 550 tax incl.
    BDT 550 tax incl.
    BDT 0 Tax
    BDT 550 tax excl.
    BDT 550 tax excl.
    BDT 0 Tax
    BDT 550 tax incl.
    More 3D Printed Robotics claw with servo motor
    Last items in stock
    In stock: 3
    G6 Metal Robot Arm Gripper Mechanical Claw Robotics Bangladesh G6 Metal Robot Arm Gripper Mechanical Claw Robotics Bangladesh

    Reference: RBD-1657

    G6 Metal Robot Arm Gripper Mechanical Claw

    (0)
    Metal Mechanical Robot Arm Claw Remote Control Robotic Paws Steering Gear MG996R Servo Arduino Raspberry pi DIY Smart Robot Functional 
    BDT 1,900
    BDT 1,900 tax incl.
    BDT 1,900 tax excl.
    BDT 1,900 tax excl.
    BDT 1,900 tax incl.
    BDT 1,900 tax incl.
    BDT 0 Tax
    BDT 1,900 tax excl.
    BDT 1,900 tax excl.
    BDT 0 Tax
    BDT 1,900 tax incl.
    More G6 Metal Robot Arm Gripper Mechanical Claw
    In-Stock
    In stock: 11
    Rover 5 Robot Platform 2 Motors 2 Encoders Robotics Bangladesh Rover 5 Robot Platform 2 Motors 2 Encoders Robotics Bangladesh

    Reference: RBD-1256

    Brand: SparkFun Electronics

    Rover 5 Robot Platform 2 Motors 2 Encoders

    (0)
    Arduino Compatible Easy to assemble Adjustable gear box angles 2 independent DC motors 2 independent hall-effect encoders Thick rubber tank treads 10Kg/cm stall torque per motor
    BDT 4,699
    BDT 4,699 tax incl.
    BDT 4,699 tax excl.
    BDT 4,699 tax excl.
    BDT 4,699 tax incl.
    BDT 4,699 tax incl.
    BDT 0 Tax
    BDT 4,699 tax excl.
    BDT 4,699 tax excl.
    BDT 0 Tax
    BDT 4,699 tax incl.
    More Rover 5 Robot Platform 2 Motors 2 Encoders
    Last items in stock
    In stock: 1
    D80mm Silicone Wheel For TT Motor (Single) Robotics Bangladesh D80mm Silicone Wheel For TT Motor (Single) Robotics Bangladesh

    Reference: RBD-3809

    Brand: DFRobot

    D80mm Silicone Wheel For TT Motor (Single)

    (0)
    Silicone wheel with ABS hub for robots, compatible with TT Geared DC motors. Diameter: 80mm, weight: 40g. Includes screws for assembly.DFRobot SKU: FIT0500
    BDT 380
    BDT 380 tax incl.
    BDT 380 tax excl.
    BDT 380 tax excl.
    BDT 380 tax incl.
    BDT 380 tax incl.
    BDT 0 Tax
    BDT 380 tax excl.
    BDT 380 tax excl.
    BDT 0 Tax
    BDT 380 tax incl.
    More D80mm Silicone Wheel For TT Motor (Single)
    In stock
    In stock: 10
    Male Pin Header Single Row Long 20mm Height Robotics Bangladesh Male Pin Header Single Row Long 20mm Height Robotics Bangladesh

    Reference: RBD-0655

    Male Pin Header Single Row Long 20mm Height

    (0)
    Single row. 2.54mm pitch. 1 x 40 pins. Through-hole mount. 20mm Height. RoboticsBD
    BDT 30
    BDT 30 tax incl.
    BDT 30 tax excl.
    BDT 30 tax excl.
    BDT 30 tax incl.
    BDT 30 tax incl.
    BDT 0 Tax
    BDT 30 tax excl.
    BDT 30 tax excl.
    BDT 0 Tax
    BDT 30 tax incl.
    More Male Pin Header Single Row Long 20mm Height
    In-Stock
    In stock: 86
    MaKey MaKey - An Invention Kit for Everyone Robotics Bangladesh

    Reference: RBD-1550

    MaKey MaKey - An Invention Kit for Everyone

    (0)
    INVENTION KIT FOR THE 21ST CENTURY Connect the world to your computer Invent Everywhere
    BDT 1,990
    BDT 1,990 tax incl.
    BDT 1,990 tax excl.
    BDT 1,990 tax excl.
    BDT 1,990 tax incl.
    BDT 1,990 tax incl.
    BDT 0 Tax
    BDT 1,990 tax excl.
    BDT 1,990 tax excl.
    BDT 0 Tax
    BDT 1,990 tax incl.
    More MaKey MaKey - An Invention Kit for Everyone
    In stock
    In stock: 11
    Pre Order XBee 1mW Trace Antenna - Series 1 (802.15. XBee 1mW Trace Antenna - Series 1 (802.15.

    Reference: RBD-0166

    XBee 1mW Trace Antenna - Series 1 (802.15.4)

    (0)
    Description: This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point...
    BDT 2,350
    BDT 2,350 tax incl.
    BDT 2,350 tax excl.
    BDT 2,350 tax excl.
    BDT 2,350 tax incl.
    BDT 2,350 tax incl.
    BDT 0 Tax
    BDT 2,350 tax excl.
    BDT 2,350 tax excl.
    BDT 0 Tax
    BDT 2,350 tax incl.
    More XBee 1mW Trace Antenna - Series 1 (802.15.4)
    Pre Order
    In stock: 0
    Single-Axis Servo Motor Long U-Shaped Metal Bracket Robotics Bangladesh Single-Axis Servo Motor Long U-Shaped Metal Bracket Robotics Bangladesh

    Reference: RBD-4028

    Single-Axis Servo Motor Long U-Shaped Metal Bracket

    (0)
    This single-axis long U-shaped metal servo bracket is a sturdy and versatile mounting solution for building robotic arms, pan-tilt systems, and mechanical linkages. Made from high-strength metal, it provides excellent rigidity and precise alignment for servo-based motion control projects.
    BDT 270
    BDT 270 tax incl.
    BDT 270 tax excl.
    BDT 270 tax excl.
    BDT 270 tax incl.
    BDT 270 tax incl.
    BDT 0 Tax
    BDT 270 tax excl.
    BDT 270 tax excl.
    BDT 0 Tax
    BDT 270 tax incl.
    More Single-Axis Servo Motor Long U-Shaped Metal Bracket
    In stock
    In stock: 20
    HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino Robotics Bangladesh

    Reference: RBD-0411

    HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino

    (0)
    Low current consumption (typical 30 mA) CW or pulse operation Flat profile Long detection range (20 m) Supply voltage: 4.75V to 5.25V X-Band Frequency: 10.525 GHz Minimum Power Output: 13 dBm EIRP. RoboticsBD
    BDT 620
    BDT 620 tax incl.
    BDT 620 tax excl.
    BDT 620 tax excl.
    BDT 620 tax incl.
    BDT 620 tax incl.
    BDT 0 Tax
    BDT 620 tax excl.
    BDT 620 tax excl.
    BDT 0 Tax
    BDT 620 tax incl.
    More HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino
    In-Stock
    In stock: 4
    You might also like

    Reference: RBD-0836

    14500 Rechargeable Lithium Battery 1200mah 3.7v

    (0)
    Model: 14500 Type: Li-Ion Battery Mark Capacity: 850mah Nominal Voltage: 3.7v Color:    Blue    Weight: 17g Rechargeable Battery: Yes Note: It's a clone battery so the ampere couldn't be guaranteed.
    BDT 80 BDT 90
    BDT 90 BDT 80 tax incl.
    BDT 90 BDT 80 tax excl.
    BDT 90 BDT 80 tax excl.
    BDT 90 BDT 80 tax incl.
    BDT 90 BDT 80 tax incl.
    BDT 0 BDT 0 Tax
    BDT 90 BDT 80 tax excl.
    BDT 90 BDT 80 tax excl.
    BDT 0 BDT 0 Tax
    BDT 90 BDT 80 tax incl.
    More 14500 Rechargeable Lithium Battery 1200mah 3.7v
    In-Stock
    In stock: 171
    18650 Battery Holder – 1 Cell Robotics Bangladesh 18650 Battery Holder – 1 Cell Robotics Bangladesh

    Reference: RBD-0989

    18650 Battery Holder – 1 Cell

    (0)
    Hold A standard 18650 batteries Wire : 15cm Output: 3.7v Dimension (Appro.): 76x20x20xmm Weight: 8gm High-quality plastic material
    BDT 40
    BDT 40 tax incl.
    BDT 40 tax excl.
    BDT 40 tax excl.
    BDT 40 tax incl.
    BDT 40 tax incl.
    BDT 0 Tax
    BDT 40 tax excl.
    BDT 40 tax excl.
    BDT 0 Tax
    BDT 40 tax incl.
    More 18650 Battery Holder – 1 Cell
    In-Stock
    In stock: 133
    18650 Li-ion Rechargeable Battery Robotics Bangladesh

    Reference: RBD-0837

    18650 Li-ion Rechargeable Battery

    (0)
    Capacity (mAh): 960-1500 Output Voltage: 3.7V High energy density High working voltage for single battery cells. Pollution-free Long cycle life ***It's a clone battery so the ampere couldn't be guaranteed. RoboticsBD
    BDT 95
    BDT 95 tax incl.
    BDT 95 tax excl.
    BDT 95 tax excl.
    BDT 95 tax incl.
    BDT 95 tax incl.
    BDT 0 Tax
    BDT 95 tax excl.
    BDT 95 tax excl.
    BDT 0 Tax
    BDT 95 tax incl.
    More 18650 Li-ion Rechargeable Battery
    In-Stock
    In stock: 258
    TP4056 1A Li-ion lithium Battery Charging Module With Current Protection - Type C Robotics Bangladesh

    Reference: RBD-1822

    TP4056 1A Li-ion lithium Battery Charging Module With Current Protection - Type C

    (0)
    Input interface: Type C Current Protection: Yes Charging mode: Linear charging. Current: 1A adjustable. Charge precision: 1.5%. Input voltage: 4.5V-5.5V. Full charge voltage: 4.2V.
    BDT 40
    BDT 40 tax incl.
    BDT 40 tax excl.
    BDT 40 tax excl.
    BDT 40 tax incl.
    BDT 40 tax incl.
    BDT 0 Tax
    BDT 40 tax excl.
    BDT 40 tax excl.
    BDT 0 Tax
    BDT 40 tax incl.
    More TP4056 1A Li-ion lithium Battery Charging Module With Current Protection - Type C
    In-Stock
    In stock: 651
    Sold-out TP4056 Li-Ion Battery Charger with Protection Robotics Bangladesh TP4056 Li-Ion Battery Charger with Protection Robotics Bangladesh

    Reference: RBD-1334

    TP4056 Li-Ion Battery Charger with Protection

    (0)
    Charging current: 1A (maximum) Maximum charging voltage: 4.2V (1.5% accuracy) Input voltage: 4.5V-5.5V
    BDT 350
    BDT 350 tax incl.
    BDT 350 tax excl.
    BDT 350 tax excl.
    BDT 350 tax incl.
    BDT 350 tax incl.
    BDT 0 Tax
    BDT 350 tax excl.
    BDT 350 tax excl.
    BDT 0 Tax
    BDT 350 tax incl.
    More TP4056 Li-Ion Battery Charger with Protection
    Sold-out
    In stock: 0

    Follow us on Facebook