• Banner

Full Color LED Module SCM Light Water 5050 LED Module For Arduino Robotics Bangladesh
  • Full Color LED Module SCM Light Water 5050 LED Module For Arduino Robotics Bangladesh

Full Color LED Module SCM Light Water 5050 LED Module For Arduino

RBD-2220

  • Good PRINT PACK design, very beautiful.
  • 8 world of the three primary colors (red-green-blue) LED color, scanning control mode.
  • Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
BDT 250.00
BDT 250.00 BDT 250.00 BDT 250.00 BDT 250.00
Tax included Tax excluded Tax included Tax excluded
BDT 250.00 Tax excluded
BDT 250.00 Tax included
BDT 0.00 Tax
BDT 250.00 Tax excluded
BDT 0.00 Tax
BDT 250.00 Tax included
Quantity
In-Stock
30 Items

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Description

This is Full-Color LED Module / RGB V2 light water for Arduino.

D0-D7 This 8-pin respectively to control 8 LED, so long as the number corresponding with pin connected just fine (as long as we turn this experiment received 2 to 9 pin on OK). Also, next three pin RGB, the need connected with GND, connected with R on the bright red, bright green on connecting with the G, B is connected with the bright blue, while even up on all three lights.

As same as the digital handset control mode, a little selection of control corresponds to LED lighting, the color selection control segment through various procedures can produce a variety of color effect changes. Featured By RoboticsBD.

Connection

  • Vcc ↔ Arduino 5v
  • D0 – D7 ↔ Connect these to Arduino pins 2 to 9
  • R, G, B ↔ Connect these to Arduino pins 10 to 12 

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features:

  1. Full color LED module SCM light water 5050 LED module for Arduino
  2. Uses high-quality RGB 5050 SMD LED chips for bright and vivid colors
  3. Waterproof design with silicone sealant for outdoor and indoor use
  4. Easy to use with Arduino microcontroller boards
  5. Can be controlled via PWM for brightness and color adjustment
  6. Compact design for easy installation and integration into various types of electronic systems

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Applications:

  1. This LED module is ideal for use in various types of lighting and display applications, including signs, billboards, art installations, and decorative lighting.
  2. It can be used to create dynamic and colorful lighting effects, and can be synchronized with music or other external triggers for enhanced visual impact.
  3. This module is suitable for use in hobbyist and DIY electronics projects, as well as for commercial product development.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Length (mm) 62
Width (mm) 35
Height (mm) 8
Shipment Weight 0.02 kg
Shipment Dimensions 7 × 4 × 2 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation:

  1. Sample Code

Package Includes:

1 x Full Color LED Module SCM Light Water 5050 LED Module For Arduino

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-2220
30 Items

Specific References

EAN13
2220
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: RBD-2295

CC2530+CC2591 Zigbee Module Wireless Power Amplification Development Board with SMA Antenna

(0)
The CC2530 ZigBee series wireless module launched by BEE Iot Technology is a ZigBee RADIO frequency module developed based on TI's CC2530F256 chip. The module can complete ZigBee learning, project application, and industrial production, and can be widely used in the field of short-distance wireless communication networking. It can build powerful network...
BDT 1,190.00
BDT 1,190.00 tax incl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax incl.
BDT 1,190.00 tax incl.
BDT 0.00 Tax
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 0.00 Tax
BDT 1,190.00 tax incl.
More
In stock
In stock: 13

Reference: RBD-2219

ESP32-IO Shield Expansion Board for Arduino WIFI ESP32

(0)
ESP32-IO shield Compatible with RoboticsBD ESP32 Core board Brings out all the pins of RoboticsBD ESP32 Core board 2 rows of 2.54mm pin headers for connecting other sensors Power supply circuit for RoboticsBD ESP32 Core board DC 7-12V voltage input DIP switch for controlling the power
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 72

Reference: RBD-1367

RGB Full color LED SMD Module

(0)
RGB trichromatic limiting resistor to prevent burnout PWM adjusted color mixing Working voltage: 5V LED drive mode: Common cathode driver
BDT 55.00
BDT 55.00 tax incl.
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 55.00 tax incl.
BDT 55.00 tax incl.
BDT 0.00 Tax
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 0.00 Tax
BDT 55.00 tax incl.
More
In-Stock
In stock: 193

Reference: RBD-2457

LM317 Adjustable Voltage Regulator Module

(0)
Regulates 4.5 – 40V input to a 1.25 – 37V output @ up to 1.5A
BDT 99.00
BDT 99.00 tax incl.
BDT 99.00 tax excl.
BDT 99.00 tax excl.
BDT 99.00 tax incl.
BDT 99.00 tax incl.
BDT 0.00 Tax
BDT 99.00 tax excl.
BDT 99.00 tax excl.
BDT 0.00 Tax
BDT 99.00 tax incl.
More
In stock
In stock: 88

Reference: RBD-0702

1 Channel 5V Relay Board Module

(0)
It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red) Relay control interface by single-chip IO. Low-level suction close, high-level release. Easy to use, simple 3 line structure. Note: Relay might be different from the picture as per stock
BDT 88.00
BDT 88.00 tax incl.
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 88.00 tax incl.
BDT 88.00 tax incl.
BDT 0.00 Tax
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 0.00 Tax
BDT 88.00 tax incl.
More
In-Stock
In stock: 63

Reference: RBD-0400

NRF24L01+PA+LNA 2.4GHz SMA Antenna Wireless Transceiver communication module 1pcs

(0)
Voltage: 3-3.6V (recommended 3.3V) V. Maximum output power: +20dBm. Power-down mode current: 4.2uA. Operating Range: 1Km Antenna Gain (peak): 2Dbi. 2MB rate (Open area): 520m. 1MB rate (Open area): 750m. 250Kb rate (Open area): 1100m. It uses 2.4GHz global open ISM band, with license free. SPI interface facilitates the communication with MCU I/O port....
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 32

Reference: RBD-0443

GPRS GSM SIM900 Arduino Shield

(0)
Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
BDT 2,400.00
BDT 2,400.00 tax incl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax incl.
BDT 2,400.00 tax incl.
BDT 0.00 Tax
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 0.00 Tax
BDT 2,400.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-1929

3.5inch HDMI Display-B

(0)
General-purpose HDMI display, Connecting computers, TV boxes, Microsoft Xbox360, SONY PS4, Nintendo Switch and so on Can be used as Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, Win10 IOT, single-touch, free drive Can be used as PC monitor, support Win7, Win8, Win10 system (No touch Function)
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-2230

NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator

(0)
Main chip: NE555 Input Voltage: 5V-15V DC. Generate an adjustable pulse for MCU. Generate an adjustable pulse, to control circuitry associated.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 36

Reference: RBD-2307

Stereo Enclosed Speaker 3W 8Ω

(0)
This speaker is a great addition to any audio project where you need 8 ohm impedance and 3W or less of power. We particularly like this speaker as it is small and enclosed for good audio volume and quality. It has a handy JST 2PH input cable to add audio to your displays and other projects (this connector is part of the JST-PH series which is ~2.0mm...
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-1180

4 Channel 5V Relay Shield for Arduino

(0)
Standard For Shield interfaces and shape Can continue to stack other For  expansion boards 3 M3 screw positioning holes for easy installation High Drive (5V or 3.3V) normally open contact closure Onboard relay indicator (red) Note: Relay might be different from the picture as per stock
BDT 425.00
BDT 425.00 tax incl.
BDT 425.00 tax excl.
BDT 425.00 tax excl.
BDT 425.00 tax incl.
BDT 425.00 tax incl.
BDT 0.00 Tax
BDT 425.00 tax excl.
BDT 425.00 tax excl.
BDT 0.00 Tax
BDT 425.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-2084

Digital Temperature Module

(0)
Power supply: 3 – 5V Good sensitivity The output format: Digital switching output (0 and 1) The comparator output signal is clean, good waveform, driving ability, more than 15mA. A fixed bolt holes for easy installation. Using a wide voltage LM393 comparator.
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 158

Reference: RBD-2680

Arcade Joystick 360 Ball Top- Short Handle

(0)
4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel! ABS plastic and solid alloy construction Uses 4 microswitches to detect on/off position Unique handle design Spring return to center Very rugged construction Rated 5A @ 125V, 3A @ 250V* Overall height: 101mm Base: 97x65mm Joystick height: 60mm 4-way, large...
BDT 1,250.00
BDT 1,250.00 tax incl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax incl.
BDT 1,250.00 tax incl.
BDT 0.00 Tax
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 0.00 Tax
BDT 1,250.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-2328

SIM A7670C R2 4G LTE GSM Module Compatible with STM32 Raspberry Pi

(0)
The A7670 series is the LTE Cat 1 module that supports wireless communication modes of LTE-TDD/LTE-FDD/GSM/GPRS/EDGE. It supports a maximum 10Mbps downlink rate and a 5Mbps uplink rate. The A7670 series supports multiple built-in network protocols, which are suitable for main IOT applications such as telematics, surveillance devices, POS, industrial...
BDT 3,350.00
BDT 3,350.00 tax incl.
BDT 3,350.00 tax excl.
BDT 3,350.00 tax excl.
BDT 3,350.00 tax incl.
BDT 3,350.00 tax incl.
BDT 0.00 Tax
BDT 3,350.00 tax excl.
BDT 3,350.00 tax excl.
BDT 0.00 Tax
BDT 3,350.00 tax incl.
More
In stock
In stock: 6

Reference: RBD-2671

W25Q64 64Mbit 8MByte Data Flash module SPI Interface BV/FVinter

(0)
IC: 25Q64FVSIG-1935 Capacity: 64M-bit / 8M-byte Clock frequency: <104MHz Working voltage: 2.7V ~ 3.6V Current: 4mA Dimensions (LxWxH): 15.5 x 14.5 x 3.7 mm
BDT 145.00
BDT 145.00 tax incl.
BDT 145.00 tax excl.
BDT 145.00 tax excl.
BDT 145.00 tax incl.
BDT 145.00 tax incl.
BDT 0.00 Tax
BDT 145.00 tax excl.
BDT 145.00 tax excl.
BDT 0.00 Tax
BDT 145.00 tax incl.
More
In stock
In stock: 20

Reference: RBD-1840

DS1302 Real Time Clock Module

(0)
The DS1302 trickle-charge timekeeping chip module with battery backup  A real-time clock/calendar and 31 bytes of static RAM. Communicates with a microprocessor via a simple serial interface. Real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year information. Note: Batteries not included.
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 38

Follow us on Facebook