Home

  • Banner

    PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module Robotics Bangladesh
    • PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module Robotics Bangladesh
    • PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module Robotics Bangladesh
    • PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module Robotics Bangladesh

    PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module

    RBD-1716

    • Working Voltage: 5.0V
    • Maximum Working Current: 100mA
    • Data Interface Level: L＜0.8V, H>2.7V, maximum voltage level 3.3V
    • Particle Measurement Range: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm

    Note: Please purchase this adapter board to use it with Arduino and Raspberry Pi. 

    BDT 2,990
    BDT 2,990 BDT 2,990 BDT 2,990 BDT 2,990
    Tax excluded Tax includedTax excludedTax includedTax excluded
    BDT 2,990 Tax excluded
    BDT 2,990 Tax included
    BDT 0 Tax
    BDT 2,990 Tax excluded
    BDT 0 Tax
    BDT 2,990 Tax included
    Quantity
    Last items in stock
    2 Items

    65 people have purchased this item
    Only 2 items left in stock
    Description

    The PMS5003 is a low-cost laser particle counter, one of a range of sensors by Plantower that also include the PMS1003, PMS3003, and PMS7003. PMS5003 is a kind of digital and universal particle concentration sensor, which can be used to obtain the number of suspended particles in the air, i.e. the concentration of particles, and output them in the form of a digital interface. This sensor can be inserted into variable instruments related to the concentration of suspended particles in the air or other environmental improvement equipment to provide correct concentration data in time. RoboticsBD

    The voltage on the signal lines RX, TX, RESET, SET must not exceed 3.3 V. When controlling the module with a higher voltage, we recommend using a voltage converter. otherwise the sensor will burnout

    Air Quality Sensor that can measure particulate matter like PM2.5, PM1.0, PM10.

    Plantower PMS5003 is a laser dust sensor. Sensor uses laser light scattering principle to measure value of dust particles suspended in the air. Sensor provides precise and reliable reading of PM2.5 value. If you are looking for PM2.5 and PM10 please look at Nova Fitness SDS011. RoboticsBD

    WITNESS real-time, reliable measurement of PM2.5 dust concentrations! (PM2.5 refers to particles that are 2.5 microns or smaller in diameter.) This sensor uses laser scattering to radiate suspending particles in the air, then collects scattering light to obtain the curve of scattering light change with time. The microprocessor calculates equivalent particle diameter and the number of particles with different diameter per unit volume. RoboticsBD

    Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck while scavenging the dusty desert wilderness of post-apocalyptic Australia. And for those of us not living in an Outback dystopia, this sensor + adapter kit is great for monitoring air quality, and super easy to use! Featured By RoboticsBD.

    Product Images are shown for illustrative purposes only and may differ from the actual product.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    How does this Sensor work?

    Well, This sensor works on the principle of laser scattering, which entails irradiating suspended particles in the air with a laser to cause scattering, collecting the scattered light at a specific angle, and calculating the intensity of the scattered light over time. Furthermore, the microprocessor calculates the equivalent particle size of the particles and the number of particles of various particle sizes per unit volume using the MIE theory algorithm.

    Pin Description:

    1. VCC Supply voltage 5V 4.5 - 5.5V 
    2. GND Ground 
    3. SET HIGH or SUSPENDED - work mode LOW - sleep mode 3.3V logic 
    4. RXD UART/TTL data recieve 3.3V logic 
    5. TXD UART/TTL data transmit 3.3V logic
    6. Reset LOW to reset 3.3V logic 
    7. NC Not connected 
    8. NC Not connected

    Note:

    Some of the PM2.5 pins are numbered from left to right as 1, 2, 3……8. But in case of PM5003, the pins are named from right to left. Be careful while connecting PM5003 pins as you might connect it reversely. 

    Features:

    1. Laser scattering principle, accurate measurement
    2. Zero false alarm rate
    3. Real-time response
    4. Correct data
    5. Minimum distinguishable particle diameter :0.3 micrometer 
    6. High anti-interference performance because of the patent structure of six sides shielding 
    7. Optional direction of air inlet and outlet in order to adapt the different design

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    General Specification
    Supply voltage:4.5 V to 5.5 V// Logic-3.3V
    Power consumption (work):below 100 mA
    Power consumption (standby):below 200 μ
    Sensitivity50% - 0.3 μm
    98% - 0.5 μm and larger
    Resolution:1 μg/m³
    Work temperature: -10 °C to 60 °C (Outdoor)
    Humidity (work):0-99%
    Size:50 x 38 x 21 mm
    Shipment Weight0.040 kg
    Shipment Dimensions7 × 5 × 3 cm

    Please allow 5% measuring deviation due to manual measurement.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Installation Note:

    1. The metal shell is connected to the internal power ground. Be careful not to short-circuit it with other external board circuit or chassis shell.
    2. The best installation method is to connect the plane with air inlet and outlet holes with the user’s machine’s inner wall (where there are gas holes connect with the outside). If this method is impossible to use, make sure there is no obstacles within 2cm of the air outlets, and there should be a structure between the air inlet and the air outlet to isolate the airflow and avoid the airflow from the air outlet to the air inlet directly inside the user machine.
    3. The vent opening on the inner wall of the user machine for the air inlet should not be smaller than the size of the air inlet.
    4. When applied to purifier products, try to avoid placing the sensor directly in the air duct of the purifier. If it is unavoidable, set up a separate structural space and place the sensor in it to isolate it from the air duct of the purifier.
    5. When used with purifiers or fixed detection equipment, the sensor position should be more than 20cm above the ground. Otherwise, it may be contaminated by large dust particles or even flocs near the ground, causing the fan to wind and block rotation.
    6. When the sensor is applied to outdoor fixed equipment, the protection against sandstorms, rain and snow, and willow catkins, etc. should be completed by the equipment.
    7. The sensor should be an integral component, the user should not disassemble it, including the metal shielding shell, to prevent irreversible damage.

    Important Note
    1. This sensor data ensures the consistency between the factory individuals, and does not use third-party testing equipment or data as a comparison standard. If the user wants the final measurement result to be consistent with a third-party testing equipment, the user can perform data fitting based on the actual collected results.
    2. This sensor is suitable for ordinary indoor environment. If the user equipment is used in the following actual environments, corresponding protective measures should be added to the sensor, otherwise the data consistency may decrease due to excessive dust, oil, and water ingress:
      • Places where more than 50% of the time, the dust concentration is greater than 300mg/m^3 or more than 20% of the time, the dust concentration is greater than 500mg/m^3, for example a smoking room.
      • Oily fume environment, such as kitchen
      • High vapour environment, such as hot spring, bathroom
      • Outdoor

    Documentation:

    1. Digital universal particle concentration sensor (PMS5003 series data manual)
    2. The Plantower PMS5003 and PMS7003 Air Quality Sensor experiment
    3. PM2.5 Air Quality Sensor Manual Created by lady ada
    4. Learn from Adafruit
    5. Interfacing PMS5003 PM2.5 Air Quality Sensor with Arduino
    6. Wiki from DFrobot

    Package Includes:

    1 x PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Product Details
    RBD-1716
    2 Items

    Specific References

    EAN13
    1716
    Comments (0)
    Grade
    No customer reviews for the moment.
    16 other products in the same category:
    BMP585 Ported I2C / SPI Temperature and Pressure Sensor – STEMMA QT / Qwiic Compatible Robotics Bangladesh BMP585 Ported I2C / SPI Temperature and Pressure Sensor – STEMMA QT / Qwiic Compatible Robotics Bangladesh

    Reference: RBD-4122

    BMP585 Ported I2C / SPI Temperature and Pressure Sensor – STEMMA QT / Qwiic Compatible

    (0)
    The BMP585 is a next-generation high-precision barometric pressure and temperature sensor from Bosch Sensortec, designed for accurate altitude and environmental measurements. It is an upgrade over earlier BMP series sensors (BMP280, BMP388, BMP390) and offers improved resolution, low noise performance, and fast conversion time.
    BDT 3,900
    BDT 3,900 tax incl.
    BDT 3,900 tax excl.
    BDT 3,900 tax excl.
    BDT 3,900 tax incl.
    BDT 3,900 tax incl.
    BDT 0 Tax
    BDT 3,900 tax excl.
    BDT 3,900 tax excl.
    BDT 0 Tax
    BDT 3,900 tax incl.
    More BMP585 Ported I2C / SPI Temperature and Pressure Sensor – STEMMA QT / Qwiic Compatible
    Last items in stock
    In stock: 1
    DHT21 AM2301 Temperature & Humidity Sensor Robotics Bangladesh

    Reference: RBD-1374

    DHT21 AM2301 Temperature & Humidity Sensor

    (0)
    Model: AM2301. Supply voltage: 3.3 ~ 5.2 V DC. Signal output form: Digital signal output. Temperature measurement range: -40 ~ +80 ºC. Temperature measurement precision: ± 0.5ºC Humidity range: 10%~90%RH. Humidity measurement precision: ±3%RH.
    BDT 550
    BDT 550 tax incl.
    BDT 550 tax excl.
    BDT 550 tax excl.
    BDT 550 tax incl.
    BDT 550 tax incl.
    BDT 0 Tax
    BDT 550 tax excl.
    BDT 550 tax excl.
    BDT 0 Tax
    BDT 550 tax incl.
    More DHT21 AM2301 Temperature & Humidity Sensor
    In-Stock
    In stock: 141
    TSOP1736 IR Infrared Receiver Robotics Bangladesh

    Reference: RBD-1195

    TSOP1736 IR Infrared Receiver

    (0)
    Temperature Coefficient Type: NTC Thermal Time Constant: 10s Resistance  10kΩ Tolerance: ±1%
    BDT 65
    BDT 65 tax incl.
    BDT 65 tax excl.
    BDT 65 tax excl.
    BDT 65 tax incl.
    BDT 65 tax incl.
    BDT 0 Tax
    BDT 65 tax excl.
    BDT 65 tax excl.
    BDT 0 Tax
    BDT 65 tax incl.
    More TSOP1736 IR Infrared Receiver
    In-Stock
    In stock: 7
    SGP30 TVOC/eCO₂ Air Quality Sensor Module Formaldehyde, CO₂ Multi Gas Sensor with Case Robotics Bangladesh SGP30 TVOC/eCO₂ Air Quality Sensor Module Formaldehyde, CO₂ Multi Gas Sensor with Case Robotics Bangladesh

    Reference: RBD-3846

    SGP30 TVOC/eCO₂ Air Quality Sensor Module Formaldehyde, CO₂ Multi Gas Sensor with Case

    (0)
    The SGP30 Air Quality Sensor Module is a high-precision digital multi-pixel gas sensor designed to measure total volatile organic compounds (TVOC) and equivalent CO₂ (eCO₂) concentrations in the air. Built using Sensirion’s CMOSens® technology, the SGP30 offers superior long-term stability, low drift, and high sensitivity — ideal for applications like air...
    BDT 2,550
    BDT 2,550 tax incl.
    BDT 2,550 tax excl.
    BDT 2,550 tax excl.
    BDT 2,550 tax incl.
    BDT 2,550 tax incl.
    BDT 0 Tax
    BDT 2,550 tax excl.
    BDT 2,550 tax excl.
    BDT 0 Tax
    BDT 2,550 tax incl.
    More SGP30 TVOC/eCO₂ Air Quality Sensor Module Formaldehyde, CO₂ Multi Gas Sensor with Case
    Last items in stock
    In stock: 2
    52mm PP Liquid Water Level Sensor Horizontal Float Switch Down Robotics Bangladesh

    Reference: RBD-1677

    52mm PP Liquid Water Level Sensor Horizontal Float Switch Down

    (0)
    Contact Rating: 10 W. Switching Voltage: 220 V. Switching Current: 0.5 A. Breakdown Voltage: 220 VDC. Carry Current: 1 A. Contact Resistance: 100 mΩ.
    BDT 299
    BDT 299 tax incl.
    BDT 299 tax excl.
    BDT 299 tax excl.
    BDT 299 tax incl.
    BDT 299 tax incl.
    BDT 0 Tax
    BDT 299 tax excl.
    BDT 299 tax excl.
    BDT 0 Tax
    BDT 299 tax incl.
    More 52mm PP Liquid Water Level Sensor Horizontal Float Switch Down
    In-Stock
    In stock: 168
    DHT11 Temperature And Humidity Sensor Module Robotics Bangladesh

    Reference: RBD-2654

    DHT11 Temperature And Humidity Sensor Module

    (0)
     Digital temperature & humidity sensor for Arduino, Raspberry Pi & microcontrollers  Temperature range: 0°C to 60°C with ±2°C accuracy  Humidity range: 20%RH to 90%RH with ±5%RH accuracy  Operates at 5V with stable digital output  Compact design (28×12×8mm) with mounting hole for easy installation  High reliability & long-term stability for...
    BDT 120
    BDT 120 tax incl.
    BDT 120 tax excl.
    BDT 120 tax excl.
    BDT 120 tax incl.
    BDT 120 tax incl.
    BDT 0 Tax
    BDT 120 tax excl.
    BDT 120 tax excl.
    BDT 0 Tax
    BDT 120 tax incl.
    More DHT11 Temperature And Humidity Sensor Module
    In-Stock
    In stock: 274
    - BDT 5 Reduced price Water Flow Sensor (Sea) YFS401 Flowmeter 0.3-6L/min3.

    Reference: RBD-2987

    Water Flow Sensor (Sea) YFS401 Flowmeter 0.3-6L/min3.5mm White

    (0)
    YFS401 water flow sensor with 0.3–6 L/min flow range Operating voltage: 3.5–24V DC, low current consumption (15mA) 1/8″ nozzle size (3.5mm) for compact integration Hall effect pulse output for easy microcontroller interfacing Ideal for coffee machines, sprinklers, water dispensers, and automation systems
    BDT 525 BDT 530
    BDT 530 BDT 525 tax incl.
    BDT 530 BDT 525 tax excl.
    BDT 530 BDT 525 tax excl.
    BDT 530 BDT 525 tax incl.
    BDT 530 BDT 525 tax incl.
    BDT 0 BDT 0 Tax
    BDT 530 BDT 525 tax excl.
    BDT 530 BDT 525 tax excl.
    BDT 0 BDT 0 Tax
    BDT 530 BDT 525 tax incl.
    More Water Flow Sensor (Sea) YFS401 Flowmeter 0.3-6L/min3.5mm White
    In-Stock
    In stock: 23
    Sold-out Raspberry Pi Camera 5MP Robotics Bangladesh

    Reference: RBD-0738

    Raspberry Pi Camera 5MP

    (0)
    Resolution: 5 MP Interface Type: CSI(Camera Serial Interface) Dimensions: 25x23x8 (LxWxH) mm Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video Fully Compatible with Raspberry Pi 3 and 4 Model B Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
    BDT 740
    BDT 740 tax incl.
    BDT 740 tax excl.
    BDT 740 tax excl.
    BDT 740 tax incl.
    BDT 740 tax incl.
    BDT 0 Tax
    BDT 740 tax excl.
    BDT 740 tax excl.
    BDT 0 Tax
    BDT 740 tax incl.
    More Raspberry Pi Camera 5MP
    Sold-out
    In stock: 0
    GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module Robotics Bangladesh GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module Robotics Bangladesh

    Reference: RBD-1645

    GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module

    (0)
    Voltage operation: 2.7V-5V Measuring distance: 4 to 50 cm Output: Digital (I/C) / Analog Output Sensor: Infrared LED and CMOS image sensor
    BDT 990
    BDT 990 tax incl.
    BDT 990 tax excl.
    BDT 990 tax excl.
    BDT 990 tax incl.
    BDT 990 tax incl.
    BDT 0 Tax
    BDT 990 tax excl.
    BDT 990 tax excl.
    BDT 0 Tax
    BDT 990 tax incl.
    More GP2Y0E03 4-50CM Distance Sensor Module Infrared Ranging Sensor Module
    In-Stock
    In stock: 5
    E18-D80NK Proximity Sensor Module Mounting Bracket Robotics Bangladesh E18-D80NK Proximity Sensor Module Mounting Bracket Robotics Bangladesh

    Reference: RBD-2723

    E18-D80NK Proximity Sensor Module Mounting Bracket

    (0)
    Acrylic mounting bracket designed for E18-D80NK Infrared Proximity Sensor 19mm sensor mounting hole with dual-sided insertion option Includes mounting hardware for quick and secure installation Allows easy attachment to robotic vehicle chassis or other surfaces Lightweight and durable construction for long-term use Compact size ensures compatibility with...
    BDT 90
    BDT 90 tax incl.
    BDT 90 tax excl.
    BDT 90 tax excl.
    BDT 90 tax incl.
    BDT 90 tax incl.
    BDT 0 Tax
    BDT 90 tax excl.
    BDT 90 tax excl.
    BDT 0 Tax
    BDT 90 tax incl.
    More E18-D80NK Proximity Sensor Module Mounting Bracket
    In-Stock
    In stock: 85
    RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module Robotics Bangladesh RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module Robotics Bangladesh

    Reference: RBD-0622

    RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module

    (0)
    Transmission signal processing control chip RCWL-9196 Wide operating voltage range 4.0V to 28.0V Penetrating detection capability, compared with the traditional infrared feeling PIR Adjustable Block time and distance Operating Current: 2.8mA (typical); 3mA (max) Detection Distance: 5-9m Transmitting Power: 20mW (typical); 30mW (max) RoboticsBD
    BDT 144
    BDT 144 tax incl.
    BDT 144 tax excl.
    BDT 144 tax excl.
    BDT 144 tax incl.
    BDT 144 tax incl.
    BDT 0 Tax
    BDT 144 tax excl.
    BDT 144 tax excl.
    BDT 0 Tax
    BDT 144 tax incl.
    More RCWL-0516 Microwave Radar Sensor Module Human Body Induction Switch Module
    In-Stock
    In stock: 29
    Slamtec RPLIDAR A1 2D 360 Degree 12 Meters LIDAR Sensor Robotics Bangladesh Slamtec RPLIDAR A1 2D 360 Degree 12 Meters LIDAR Sensor Robotics Bangladesh

    Reference: RBD-1205

    SLAMTEC RPLiDAR A1M8 360 Degree Laser Range Finder 12m Lidar Sensor

    (0)
    Distance Range (Radius): 0.15m to 6m, white objects (Diameter Range – 12m) Angular Range: 0 ~ 360º Distance Resolution: < 0.5mm Angular Resolution: <= 1 º Sample Duration: 0.5 ms Sample Frequency: >=8000 Hz Scan Rate: 1 ~ 10Hz, Typical 5.5HzNote: The range of this RPLiDAR is 6-meter if we are considering radius and 12-meter if we are considering...
    BDT 16,750
    BDT 16,750 tax incl.
    BDT 16,750 tax excl.
    BDT 16,750 tax excl.
    BDT 16,750 tax incl.
    BDT 16,750 tax incl.
    BDT 0 Tax
    BDT 16,750 tax excl.
    BDT 16,750 tax excl.
    BDT 0 Tax
    BDT 16,750 tax incl.
    More SLAMTEC RPLiDAR A1M8 360 Degree Laser Range Finder 12m Lidar Sensor
    In-Stock
    In stock: 7
    AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino Robotics Bangladesh AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino Robotics Bangladesh

    Reference: RBD-0564

    AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

    (0)
    Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
    BDT 455
    BDT 455 tax incl.
    BDT 455 tax excl.
    BDT 455 tax excl.
    BDT 455 tax incl.
    BDT 455 tax incl.
    BDT 0 Tax
    BDT 455 tax excl.
    BDT 455 tax excl.
    BDT 0 Tax
    BDT 455 tax incl.
    More AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino
    In-Stock
    In stock: 14
    Photoelectric Switch DC6-36V E3F-DS30C4 NPN NO Proximity Sensor Switch 10-30cm Robotics Bangladesh Photoelectric Switch DC6-36V E3F-DS30C4 NPN NO Proximity Sensor Switch 10-30cm Robotics Bangladesh

    Reference: RBD-2210

    Photoelectric Switch DC6-36V E3F-DS30C4 NPN NO Proximity Sensor Switch 10-30cm

    (0)
    Photoelectric switch sensor DC 10-30V power supply Working current: 200mA Induction distance: 5-30cm Response time: 1ms Output form: DC three-wire normally open NPN NO Detection object: Transparent / opaque object
    BDT 850
    BDT 850 tax incl.
    BDT 850 tax excl.
    BDT 850 tax excl.
    BDT 850 tax incl.
    BDT 850 tax incl.
    BDT 0 Tax
    BDT 850 tax excl.
    BDT 850 tax excl.
    BDT 0 Tax
    BDT 850 tax incl.
    More Photoelectric Switch DC6-36V E3F-DS30C4 NPN NO Proximity Sensor Switch 10-30cm
    In-Stock
    In stock: 45
    - BDT 45 Reduced price Smart Speed Detecting Sensor for Arduino Robotics Bangladesh

    Reference: RBD-0041

    Smart Speed Detecting Sensor for Arduino

    (0)
    Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
    BDT 105 BDT 150
    BDT 150 BDT 105 tax incl.
    BDT 150 BDT 105 tax excl.
    BDT 150 BDT 105 tax excl.
    BDT 150 BDT 105 tax incl.
    BDT 150 BDT 105 tax incl.
    BDT 0 BDT 0 Tax
    BDT 150 BDT 105 tax excl.
    BDT 150 BDT 105 tax excl.
    BDT 0 BDT 0 Tax
    BDT 150 BDT 105 tax incl.
    More Smart Speed Detecting Sensor for Arduino
    In Stock
    In stock: 61
    50kg Half-bridge Experiments Body Scale Load Cell Sensor Robotics Bangladesh

    Reference: RBD-2149

    50kg Half-bridge Experiments Body Scale Load Cell Sensor

    (0)
    Capacity (Kg): 50. Output Sensitivity (mv/v): 1.0±0.1. Nonlinearity (%FS): 0.03. Repeatability (%FS): 0.03. Input Resistance (Ω): 1000. Insulation Resistance (MΩ): ≥5000.
    BDT 164
    BDT 164 tax incl.
    BDT 164 tax excl.
    BDT 164 tax excl.
    BDT 164 tax incl.
    BDT 164 tax incl.
    BDT 0 Tax
    BDT 164 tax excl.
    BDT 164 tax excl.
    BDT 0 Tax
    BDT 164 tax incl.
    More 50kg Half-bridge Experiments Body Scale Load Cell Sensor
    In-Stock
    In stock: 6
    1.25mm to 2.54mm 6pin Adapter for PMS Sensors Robotics Bangladesh 1.25mm to 2.54mm 6pin Adapter for PMS Sensors Robotics Bangladesh

    Reference: RBD-2608

    1.25mm to 2.54mm 6pin Adapter for PMS Sensors

    (0)
    Connects your PMS5003 air quality sensor to standard 2.54mm headers Simplifies integration with Arduino, Raspberry Pi, and other microcontrollers No soldering or custom connections required Easy to use and ensures compatibility Ideal for air quality monitoring and environmental sensing projects
    BDT 210
    BDT 210 tax incl.
    BDT 210 tax excl.
    BDT 210 tax excl.
    BDT 210 tax incl.
    BDT 210 tax incl.
    BDT 0 Tax
    BDT 210 tax excl.
    BDT 210 tax excl.
    BDT 0 Tax
    BDT 210 tax incl.
    More 1.25mm to 2.54mm 6pin Adapter for PMS Sensors
    In-Stock
    In stock: 23
    DHT22 Original AM2302 Digital Temperature Humidity Sensor Module Robotics Bangladesh DHT22 Original AM2302 Digital Temperature Humidity Sensor Module Robotics Bangladesh

    Reference: RBD-0923

    DHT22 Original AM2302 Digital Temperature Humidity Sensor Module

    (0)
    Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH) Resolution: temperature: 0.1 ℃, humidity: 0.1%RH Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years High precision Capacitive type Full range temperature compensated Relative humidity and...
    BDT 626
    BDT 626 tax incl.
    BDT 626 tax excl.
    BDT 626 tax excl.
    BDT 626 tax incl.
    BDT 626 tax incl.
    BDT 0 Tax
    BDT 626 tax excl.
    BDT 626 tax excl.
    BDT 0 Tax
    BDT 626 tax incl.
    More DHT22 Original AM2302 Digital Temperature Humidity Sensor Module
    In-Stock
    In stock: 59
    - BDT 14 On sale! Reduced price MQ-135 Gas Sensor Robotics Bangladesh

    Reference: RBD-0679

    MQ-135 Gas Sensor

    (0)
    Sensitivity to Ammonia, Sulfide and Benzene steam Sensitive for benzene, alcohol, smoke Fast response and recovery Adjustable sensitivity. RoboticsBD Signal output indicator Output voltage boosts along with the concentration of the measured gases increases.
    BDT 174 BDT 188
    BDT 188 BDT 174 tax incl.
    BDT 188 BDT 174 tax excl.
    BDT 188 BDT 174 tax excl.
    BDT 188 BDT 174 tax incl.
    BDT 188 BDT 174 tax incl.
    BDT 0 BDT 0 Tax
    BDT 188 BDT 174 tax excl.
    BDT 188 BDT 174 tax excl.
    BDT 0 BDT 0 Tax
    BDT 188 BDT 174 tax incl.
    More MQ-135 Gas Sensor
    In-Stock
    In stock: 108
    ENS160 AHT21 Carbon Dioxide CO2 eCO2 TVOC Air Quality Temperature & Humidity Sensor Robotics Bangladesh

    Reference: RBD-2508

    ENS160 AHT21 Carbon Dioxide CO2 eCO2 TVOC Air Quality Temperature & Humidity Sensor

    (0)
    ENS160 + AHT21 integrated sensor for CO₂, eCO₂, TVOC, temperature & humidity monitoring Detects multiple harmful gases including toluene, hydrogen, ethanol, NO₂, and ozone High-performance digital output for accurate indoor air quality analysis Ideal for smart home, building automation, and air purification systems Compact and lightweight module for...
    BDT 990
    BDT 990 tax incl.
    BDT 990 tax excl.
    BDT 990 tax excl.
    BDT 990 tax incl.
    BDT 990 tax incl.
    BDT 0 Tax
    BDT 990 tax excl.
    BDT 990 tax excl.
    BDT 0 Tax
    BDT 990 tax incl.
    More ENS160 AHT21 Carbon Dioxide CO2 eCO2 TVOC Air Quality Temperature & Humidity Sensor
    In-Stock
    In stock: 6
    Male to Female Jumper Wires 20 Pcs 20cm Robotics Bangladesh Male to Female Jumper Wires 20 Pcs 20cm Robotics Bangladesh

    Reference: RBD-2640

    Male to Female Jumper Wires 20 Pcs 20cm

    (0)
    Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-female connector design for flexible connections. Colorful for easy identification and organization.
    BDT 55
    BDT 55 tax incl.
    BDT 55 tax excl.
    BDT 55 tax excl.
    BDT 55 tax incl.
    BDT 55 tax incl.
    BDT 0 Tax
    BDT 55 tax excl.
    BDT 55 tax excl.
    BDT 0 Tax
    BDT 55 tax incl.
    More Male to Female Jumper Wires 20 Pcs 20cm
    In-Stock
    In stock: 158
    Precision Real Time Clock Module DS3231 AT24C32 I2C Robotics Bangladesh

    Reference: RBD-0386

    Precision Real Time Clock Module DS3231 AT24C32 I2C

    (0)
    1 Hz output pin SQW. 32 KHz output pin 32K. RoboticsBD Voltage Supply: 2.2 V ~ 5.5 V (for RTC). Time Format: HH: MM: SS (12/24 hr). Date Format: YY-MM-DD-dd. DS 3231 based RTC with 2032 Battery Holder. RoboticsBD Battery is not includedNote: Batteries not included. (Comes without Battery)
    BDT 244
    BDT 244 tax incl.
    BDT 244 tax excl.
    BDT 244 tax excl.
    BDT 244 tax incl.
    BDT 244 tax incl.
    BDT 0 Tax
    BDT 244 tax excl.
    BDT 244 tax excl.
    BDT 0 Tax
    BDT 244 tax incl.
    More Precision Real Time Clock Module DS3231 AT24C32 I2C
    In-Stock
    In stock: 74
    ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi Robotics Bangladesh ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi Robotics Bangladesh

    Reference: RBD-0948

    ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

    (0)
    Built-in Flash: 32Mbit Power supply: 5V WiFi protocol: IEEE 802.11 b/g/n Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S Logic level: 3.3V A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and...
    BDT 427
    BDT 427 tax incl.
    BDT 427 tax excl.
    BDT 427 tax excl.
    BDT 427 tax incl.
    BDT 427 tax incl.
    BDT 0 Tax
    BDT 427 tax excl.
    BDT 427 tax excl.
    BDT 0 Tax
    BDT 427 tax incl.
    More ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi
    In-Stock
    In stock: 406
    MP-135 MP503 Air Quality Sensor Module Robotics Bangladesh

    Reference: RBD-1751

    MP-135 MP503 Air Quality Sensor Module

    (0)
    Detection Gas: H2, Alcohol, CO, VOC  Detection Range: 10～500ppmH2 5～500ppm Alcohol 10～500ppm CO Air Quality Sensor Module
    BDT 590
    BDT 590 tax incl.
    BDT 590 tax excl.
    BDT 590 tax excl.
    BDT 590 tax incl.
    BDT 590 tax incl.
    BDT 0 Tax
    BDT 590 tax excl.
    BDT 590 tax excl.
    BDT 0 Tax
    BDT 590 tax incl.
    More MP-135 MP503 Air Quality Sensor Module
    In-Stock
    In stock: 21
    You might also like
    1.25mm to 2.54mm 6pin Adapter for PMS Sensors Robotics Bangladesh 1.25mm to 2.54mm 6pin Adapter for PMS Sensors Robotics Bangladesh

    Reference: RBD-2608

    1.25mm to 2.54mm 6pin Adapter for PMS Sensors

    (0)
    Connects your PMS5003 air quality sensor to standard 2.54mm headers Simplifies integration with Arduino, Raspberry Pi, and other microcontrollers No soldering or custom connections required Easy to use and ensures compatibility Ideal for air quality monitoring and environmental sensing projects
    BDT 210
    BDT 210 tax incl.
    BDT 210 tax excl.
    BDT 210 tax excl.
    BDT 210 tax incl.
    BDT 210 tax incl.
    BDT 0 Tax
    BDT 210 tax excl.
    BDT 210 tax excl.
    BDT 0 Tax
    BDT 210 tax incl.
    More 1.25mm to 2.54mm 6pin Adapter for PMS Sensors
    In-Stock
    In stock: 23
    Sold-out 5 In 1 Portable CO2 Detector Air Quality Detector Intelligent Air Detector Robotics Bangladesh

    Reference: RBD-1654

    5 In 1 Portable CO2 Detector Air Quality Detector Intelligent Air Detector

    (0)
    5 In 1 Portable  CO2 Detector Air Quality Detector Intelligent Air Detector Temperature and Humidity Sensor Carbon Dioxide Monitor TVOC Formaldehyde Detection HCHO Detector  Color Black
    BDT 3,950
    BDT 3,950 tax incl.
    BDT 3,950 tax excl.
    BDT 3,950 tax excl.
    BDT 3,950 tax incl.
    BDT 3,950 tax incl.
    BDT 0 Tax
    BDT 3,950 tax excl.
    BDT 3,950 tax excl.
    BDT 0 Tax
    BDT 3,950 tax incl.
    More 5 In 1 Portable CO2 Detector Air Quality Detector Intelligent Air Detector
    Sold-out
    In stock: 0
    Air Quality Breakout - CCS811 Robotics Bangladesh

    Reference: RBD-0958

    Air Quality Breakout - CCS811

    (0)
    Five Operating Modes Integrated MCU Onboard Processing Standard I2C Digital Interface Optimized Low-Power Modes Optional NTC Thermistor Pins
    BDT 2,099
    BDT 2,099 tax incl.
    BDT 2,099 tax excl.
    BDT 2,099 tax excl.
    BDT 2,099 tax incl.
    BDT 2,099 tax incl.
    BDT 0 Tax
    BDT 2,099 tax excl.
    BDT 2,099 tax excl.
    BDT 0 Tax
    BDT 2,099 tax incl.
    More Air Quality Breakout - CCS811
    In-Stock
    In stock: 16
    - BDT 100 Reduced price Arduino Mega 2560 R3 Robotics Bangladesh Arduino Mega 2560 R3 Robotics Bangladesh

    Reference: RBD-0009

    Arduino Mega 2560 R3

    (0)
    54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
    BDT 1,788 BDT 1,888
    BDT 1,888 BDT 1,788 tax incl.
    BDT 1,888 BDT 1,788 tax excl.
    BDT 1,888 BDT 1,788 tax excl.
    BDT 1,888 BDT 1,788 tax incl.
    BDT 1,888 BDT 1,788 tax incl.
    BDT 0 BDT 0 Tax
    BDT 1,888 BDT 1,788 tax excl.
    BDT 1,888 BDT 1,788 tax excl.
    BDT 0 BDT 0 Tax
    BDT 1,888 BDT 1,788 tax incl.
    More Arduino Mega 2560 R3
    In-Stock
    In stock: 6
    Arduino Uno R3 Robotics Bangladesh Arduino Uno R3 Robotics Bangladesh

    Reference: RBD-0094

    Arduino Uno R3

    (0)
    The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
    BDT 988
    BDT 988 tax incl.
    BDT 988 tax excl.
    BDT 988 tax excl.
    BDT 988 tax incl.
    BDT 988 tax incl.
    BDT 0 Tax
    BDT 988 tax excl.
    BDT 988 tax excl.
    BDT 0 Tax
    BDT 988 tax incl.
    More Arduino Uno R3
    In-Stock
    In stock: 480
    - BDT 91 On sale! Reduced price Arduino Uno R3 SMD Robotics Bangladesh Arduino Uno R3 SMD Robotics Bangladesh

    Reference: RBD-0323

    Arduino Uno R3 SMD

    (0)
    Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
    BDT 470 BDT 561
    BDT 561 BDT 470 tax incl.
    BDT 561 BDT 470 tax excl.
    BDT 561 BDT 470 tax excl.
    BDT 561 BDT 470 tax incl.
    BDT 561 BDT 470 tax incl.
    BDT 0 BDT 0 Tax
    BDT 561 BDT 470 tax excl.
    BDT 561 BDT 470 tax excl.
    BDT 0 BDT 0 Tax
    BDT 561 BDT 470 tax incl.
    More Arduino Uno R3 SMD
    In-Stock
    In stock: 80
    MP-135 MP503 Air Quality Sensor Module Robotics Bangladesh

    Reference: RBD-1751

    MP-135 MP503 Air Quality Sensor Module

    (0)
    Detection Gas: H2, Alcohol, CO, VOC  Detection Range: 10～500ppmH2 5～500ppm Alcohol 10～500ppm CO Air Quality Sensor Module
    BDT 590
    BDT 590 tax incl.
    BDT 590 tax excl.
    BDT 590 tax excl.
    BDT 590 tax incl.
    BDT 590 tax incl.
    BDT 0 Tax
    BDT 590 tax excl.
    BDT 590 tax excl.
    BDT 0 Tax
    BDT 590 tax incl.
    More MP-135 MP503 Air Quality Sensor Module
    In-Stock
    In stock: 21
    PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module Robotics Bangladesh PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module Robotics Bangladesh

    Reference: RBD-1716

    PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module

    (0)
    Working Voltage: 5.0V Maximum Working Current: 100mA Data Interface Level: L＜0.8V, H>2.7V, maximum voltage level 3.3V Particle Measurement Range: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μmNote: Please purchase this adapter board to use it with Arduino and Raspberry Pi. 
    BDT 2,990
    BDT 2,990 tax incl.
    BDT 2,990 tax excl.
    BDT 2,990 tax excl.
    BDT 2,990 tax incl.
    BDT 2,990 tax incl.
    BDT 0 Tax
    BDT 2,990 tax excl.
    BDT 2,990 tax excl.
    BDT 0 Tax
    BDT 2,990 tax incl.
    More PM2.5 Air Quality Sensor PMS5003 High Precision Digital Output Module
    Last items in stock
    In stock: 2
    TDS Meter V1.0 Module Water Quality Sensor for Arduino Robotics Bangladesh

    Reference: RBD-1717

    TDS Meter V1.0 Module Water Quality Sensor for Arduino

    (0)
    Wide voltage operation: 3.3~5.5V 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems The excitation source is an AC signal, effectively preventing probe polarization Waterproof probe for long-term immersion in water
    BDT 1,830
    BDT 1,830 tax incl.
    BDT 1,830 tax excl.
    BDT 1,830 tax excl.
    BDT 1,830 tax incl.
    BDT 1,830 tax incl.
    BDT 0 Tax
    BDT 1,830 tax excl.
    BDT 1,830 tax excl.
    BDT 0 Tax
    BDT 1,830 tax incl.
    More TDS Meter V1.0 Module Water Quality Sensor for Arduino
    In-Stock
    In stock: 46

    Follow us on Facebook

    Facebook