Banner

ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

Reference RBD-0948

Built-in Flash: 32Mbit
Power supply: 5V
WiFi protocol: IEEE 802.11 b/g/n
Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
Logic level: 3.3V

A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the recommended cable available here: High-Quality USB Cable.

This is a ESP32 Third Party Board. If you need the orignal Espressif Development Board Click Here >
1. Espressif ESP32 DevKitC WROOM 32E Development Board
2. Espressif ESP32-DevKitC ESP32-WROOM-32UE
3. Espressif ESP32-DEVKITC-VE Development Board ESP32-WROVER-E

Description
Product Details

Description

The core of this module is the ESP32 chip, which is scalable and adaptive. Two CPU cores can be individually controlled. The clock frequency is adjustable from 80 MHz to 240 MHz and supports RTOS. RoboticsBD

It is a general-purpose Wi-Fi+BT+BLE MCU module.ESP-WROOM-32s The module integrates traditional Bluetooth, Bluetooth low energy and Wi-Fi. Wide range of uses: Wi-Fi supports a wide range of communication connections, as well as a direct connection to the Internet via a router; Bluetooth allows users to connect to a mobile phone or broadcast a BLE Beacon for signal detection. RoboticsBD

Please be aware that ESP32-P, ESP32-S, and ESP32-X are third-party naming conventions commonly used to identify generic ESP32 development boards. These names do not refer to different models or hardware variations.

All of these designations refer to boards based on the ESP32-WROOM-32 module — the standard and widely used version of the ESP32.

The module supports data rates up to 150 Mbps and antenna output power of 20dBm for maximum wireless communication. As a result, this module has industry-leading specifications and performs well in terms of high integration, wireless transmission distance, power consumption, and network connectivity Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Features:

802.11b/g/n （802.11n，speed up to 150Mbps）
WIFI Frequency Range 2.4GHz ~ 2.5GHz
Clock frequency adjustment range from 80 MHz to 240 MHz, support for
RTOS
Built-in 2-channel 12-bit high-precision ADC with up to 18 channels
Support UART/GPIO/ADC/DAC/SDIO/SD card/PWM/I2C/I2S interface
Support multiple sleep modes, ESP32 chip sleep current is less than 5 μA
Embedded Lwip protocol stack
Supports STA/AP/STA + AP operation mode
Supports remote firmware upgrade (FOTA)
General AT commands can be used quickly
Support secondary development, integrated Windows, Linux development

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

General Specification
Module model	ESP-WROOM-32s
SPI Flash	32Mbit(default)
Support interface	UART/GPIO/ADC/DAC/SDIO/SD card /PWM/I2C/I2S
Integrated crystal oscillator	40MHz Crystal oscillator
IO Port	38
Antenna	Onboard antenna
Power Supply	Voltage 3.0V ~ 3.6V，Typical 3.3V，Current >500mA
Operating Temperature	-40 ℃ ~ 85 ℃
Storage Environment	-40 ℃ ~ 120 ℃
Length(mm)	25.4
Width(mm)	48.26
Height(mm)	3
Weight(g)	10
Shipment Weight	0.015 kg
Shipment Dimensions	12 × 8 × 2 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Documentation:

Github Library

Package includes:

1 x ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

Product Details

Reference RBD-0948

In stock 406 Items

Specific References

EAN13: 0948

Comments (0)

Grade

No customer reviews for the moment.

16 other products in the same category:

STM32 NUCLEO-L476RG Development Board – STM32L476RGT6 ARM Cortex-M4, 1MB Flash, 128KB SRAM Robotics Bangladesh

Reference: RBD-3718

Brand: ST Microelectronics

STM32 NUCLEO-L476RG Development Board – STM32L476RGT6 ARM Cortex-M4, 1MB Flash, 128KB SRAM

(0)

The STM32 NUCLEO-L476RG is a feature-rich development board based on the STM32L476RGT6 microcontroller, equipped with an ARM Cortex-M4 core running at 80 MHz. With 1 MB Flash memory and 128 KB SRAM, this board provides the power and flexibility needed for advanced embedded projects, while also offering ultra-low power performance.

BDT 4,889

BDT 4,889 tax incl.

BDT 4,889 tax excl.

BDT 4,889 tax incl.

BDT 0 Tax

BDT 4,889 tax excl.

BDT 0 Tax

BDT 4,889 tax incl.

Last items in stock

In stock: 2

Reference: RBD-2131

S2 Mini V1.0.0 ESP32-S2 4MB FLASH 2MB PSRAM WIFI Development Board

(0)

ESP32-S2 based WIFI development board Features S2FN4R2 WIFI IC Equipped with 4MB FLASH and 2MB PSRAM Type-C USB connectivity 27 digital input/output pins with support for interrupt/pwm/I2C/single wire ADC, DAC, I2C, SPI, UART, USB OTG

BDT 690

BDT 690 tax incl.

BDT 690 tax excl.

BDT 690 tax incl.

BDT 0 Tax

BDT 690 tax excl.

BDT 0 Tax

BDT 690 tax incl.

In stock

In stock: 21

Reference: RBD-3008

STM32F103C8T6 Development Board with 0.96 OLED Display

(0)

STM32F103C8T6 microcontroller for versatile development 0.96-inch OLED display for real-time data visualization Multiple communication interfaces including Serial, CAN, Ethernet, and Wi-Fi Includes various sensors such as MPU6050 and LD3320 Ideal for IoT, robotics, data logging, and educational projects

BDT 2,895

BDT 2,895 tax incl.

BDT 2,895 tax excl.

BDT 2,895 tax incl.

BDT 0 Tax

BDT 2,895 tax excl.

BDT 0 Tax

BDT 2,895 tax incl.

In-Stock

In stock: 4

Reference: RBD-3173

Arduino Uno SMD CH340G with Type-C Interface

(0)

Arduino UNO SMD CH340G with Type-C Interface – upgraded UNO R3 for modern connectivity. Features Type-C USB port for reliable data communication and easy connection with laptops. Powered by the Atmega328 microcontroller for stable and consistent performance. CH340G USB-to-serial chip ensures compatibility with Arduino IDE on all major OS. Fully compatible...

BDT 490

BDT 490 tax incl.

BDT 490 tax excl.

BDT 490 tax incl.

BDT 0 Tax

BDT 490 tax excl.

BDT 0 Tax

BDT 490 tax incl.

In-Stock

In stock: 90

MicroPython Board R3 ATmega328P+ESP8266, 8Mb flash, USB-TTL CH340G, Micro-USB Robotics Bangladesh

Reference: RBD-1603

MicroPython Board R3 ATmega328P+ESP8266, 4Mb flash, USB-TTL CH340G, Micro-USB

(0)

USB-TTL converter. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6. The board color, shape, and parts may differ from the pictures due to rotating stock.

BDT 1,199

BDT 1,199 tax incl.

BDT 1,199 tax excl.

BDT 1,199 tax incl.

BDT 0 Tax

BDT 1,199 tax excl.

BDT 0 Tax

BDT 1,199 tax incl.

In-Stock

In stock: 10

Genuine Arduino Nano ESP32 with headers Robotics Bangladesh

Reference: RBD-2499

Brand: Arduino Official

Genuine Arduino Nano ESP32 with headers

(0)

Made in ITALY Powerful and versatile Arduino board based on ESP32-S3 Compatible with Arduino and MicroPython programming Easy to use and ideal for beginners and advanced users alike Perfect for IoT and MicroPython projects

BDT 5,320

BDT 5,320 tax incl.

BDT 5,320 tax excl.

BDT 5,320 tax incl.

BDT 0 Tax

BDT 5,320 tax excl.

BDT 0 Tax

BDT 5,320 tax incl.

In-Stock

In stock: 5

Reference: RBD-2267

ESP32 Dev Board CP2102

(0)

Integrated Wi-Fi and Bluetooth connectivity make this board a great choice for IoT projects and robotics. The ESP32 chip on the board is a dual-core microcontroller that operates at up to 240 MHz, providing ample processing power for complex projects. With 520 KB of SRAM and 4 MB of flash memory, the board has plenty of memory for storing and running...

BDT 650

BDT 650 tax incl.

BDT 650 tax excl.

BDT 650 tax incl.

BDT 0 Tax

BDT 650 tax excl.

BDT 0 Tax

BDT 650 tax incl.

In-Stock

In stock: 130

STM32 NUCLEO-F103RB Development Board – STM32F103RBT6, ARM Cortex-M3, 128KB Flash, 20KB SRAM Robotics Bangladesh

Reference: RBD-3721

Brand: ST Microelectronics

STM32 NUCLEO-F103RB Development Board – STM32F103RBT6, ARM Cortex-M3, 128KB Flash, 20KB SRAM

(0)

The STM32 NUCLEO-F103RB is a versatile development board based on the STM32F103RBT6 microcontroller, featuring a 32-bit ARM Cortex-M3 core running at 72 MHz. With 128 KB Flash memory and 20 KB SRAM, this board delivers solid performance for a wide range of embedded applications.

BDT 3,698

BDT 3,698 tax incl.

BDT 3,698 tax excl.

BDT 3,698 tax incl.

BDT 0 Tax

BDT 3,698 tax excl.

BDT 0 Tax

BDT 3,698 tax incl.

Last items in stock

In stock: 3

Reference: RBD-3420

STM32F103C6T6 Micro-B Imported Microcontroller Blue Pill Board

(0)

STM32F103C6T6 Micro-B Blue Pill with original imported STMicroelectronics chipset ARM Cortex-M3 32-bit MCU running at 72MHz 32KB Flash & 10KB SRAM for real-time embedded applications Micro-B USB interface for programming and power Multiple communication interfaces: USART, SPI, I2C, CAN, USB Ideal for industrial control, robotics, IoT, and automation...

BDT 350

BDT 350 tax incl.

BDT 350 tax excl.

BDT 350 tax incl.

BDT 0 Tax

BDT 350 tax excl.

BDT 0 Tax

BDT 350 tax incl.

In-Stock

In stock: 39

Seeed Studio XIAO ESP32-S3 – Ultra-Compact Dual-Core WiFi + BLE 5.

Reference: RBD-3611

Brand: Seeed Studio

Seeed Studio XIAO ESP32-S3 – Ultra-Compact Dual-Core WiFi + BLE 5.0 Development Board

(0)

The Seeed Studio XIAO ESP32-S3 is a powerful, thumb-sized microcontroller development board built around the ESP32-S3 dual-core Xtensa LX7 processor. Running at up to 240MHz, this board delivers high performance while maintaining exceptional energy efficiency. Supporting both 2.4GHz WiFi and Bluetooth 5.0 (BLE), it is ideal for a broad range of wireless...

BDT 2,080

BDT 2,080 tax incl.

BDT 2,080 tax excl.

BDT 2,080 tax incl.

BDT 0 Tax

BDT 2,080 tax excl.

BDT 0 Tax

BDT 2,080 tax incl.

Last items in stock

In stock: 3

Reference: RBD-3261

ESP8266 Witty Cloud ESP-12F WiFi Module

(0)

ESP8266 Witty Cloud ESP-12F WiFi module featuring integrated RGB LED, LDR sensor, and pushbutton. Powered by ESP8266 32-bit microcontroller with 4MB flash and 80/160MHz clock speed. Supports Arduino IDE, NodeMCU, and AT command programming via CH340 USB interface. Includes dual-board design with detachable USB interface for flexible use Built-in 802.11...

BDT 490

BDT 490 tax incl.

BDT 490 tax excl.

BDT 490 tax incl.

BDT 0 Tax

BDT 490 tax excl.

BDT 0 Tax

BDT 490 tax incl.

In-Stock

In stock: 27

Reference: RBD-3597

ESP32 WROOM-32U CP2102 Development Board Micro USB

(0)

The ESP32-WROOM-32U Development Board with Micro USB is a versatile, compact solution ideal for developers looking to leverage the full power of the ESP32 in a breadboard-friendly format. With a CP2102 USB-to-Serial chip and support for external antennas via the U.FL connector, this board is well-suited for wireless communication, IoT projects, and remote...

BDT 682

BDT 682 tax incl.

BDT 682 tax excl.

BDT 682 tax incl.

BDT 0 Tax

BDT 682 tax excl.

BDT 0 Tax

BDT 682 tax incl.

In stock

In stock: 132

Reference: RBD-2764

ESP32-S3-WROOM-1-N16R8 UNO Development Board For DevKitC-1

(0)

ESP32-S3-WROOM-1-N16R8 Wi-Fi + Bluetooth 5 (LE) UNO development board Dual-core 32-bit LX7 processor, up to 240MHz with AI acceleration Integrated 16MB Flash and 8MB PSRAM for complex applications Rich peripheral interfaces: SPI, UART, I2C, I2S, LCD, camera, IR, USB 1.1 OTG Supports IoT, AIoT, and smart device development with secure encryption Compact,...

BDT 1,250

BDT 1,250 tax incl.

BDT 1,250 tax excl.

BDT 1,250 tax incl.

BDT 0 Tax

BDT 1,250 tax excl.

BDT 0 Tax

BDT 1,250 tax incl.

In-Stock

In stock: 17

Reference: RBD-2160

1 Meter Micro USB Cable for Arduino, Node MCU and Flight Controllers

(0)

Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.

BDT 250

BDT 250 tax incl.

BDT 250 tax excl.

BDT 250 tax incl.

BDT 0 Tax

BDT 250 tax excl.

BDT 0 Tax

BDT 250 tax incl.

In-Stock

In stock: 120

New

Reference: RBD-4185

ESP32-WROVER-E ESP32-DEVKITC Core Board

(0)

The ESP32-WROVER-E ESP32-DEVKITC Core Board is a powerful development board based on the ESP32-WROVER-E module, designed for Wi-Fi and Bluetooth–enabled embedded applications. With a dual-core ESP32 MCU and onboard PSRAM support, this board is well suited for memory-intensive projects such as IoT gateways, data logging, display-based systems, and wireless...

BDT 950

BDT 950 tax incl.

BDT 950 tax excl.

BDT 950 tax incl.

BDT 0 Tax

BDT 950 tax excl.

BDT 0 Tax

BDT 950 tax incl.

In stock

In stock: 29

Reference: RBD-1820

ESP-32S ESP-WROOM-32 Development Board 38P NodeMCU

(0)

38 Pin version 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN Ultra-Low power consumption works perfectly with the IDE A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the...

BDT 493

BDT 493 tax incl.

BDT 493 tax excl.

BDT 493 tax incl.

BDT 0 Tax

BDT 493 tax excl.

BDT 0 Tax

BDT 493 tax incl.

In-Stock

In stock: 56

Frequently purchased together
Products from the same category

- BDT 14 Reduced price

Reference: RBD-0133

Breadboard Full Size Bare 830 Tie Points

(0)

830 Solder-less Points Ideal for Experimenting With Circuit Design In Labs Compatible with resistance, diodes, transistors, LED’s, Capacitors and other types of electronic components Colored coordinates for easy components placement. Accept a variety of wire sizes 20-29 AWG

BDT 145 BDT 159

BDT 159 BDT 145 tax incl.

BDT 159 BDT 145 tax excl.

BDT 159 BDT 145 tax incl.

BDT 0 BDT 0 Tax

BDT 159 BDT 145 tax excl.

BDT 0 BDT 0 Tax

BDT 159 BDT 145 tax incl.

In-Stock

In stock: 163

Reference: RBD-2640

Male to Female Jumper Wires 20 Pcs 20cm

(0)

Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-female connector design for flexible connections. Colorful for easy identification and organization.

BDT 55

BDT 55 tax incl.

BDT 55 tax excl.

BDT 55 tax incl.

BDT 0 Tax

BDT 55 tax excl.

BDT 0 Tax

BDT 55 tax incl.

In-Stock

In stock: 158

Breadboard (Medium Size) Robotics Bangladesh

Reference: RBD-0120

Breadboard Half Size Bare 400 Tie Points

(0)

400 tie points 2 Power lanes, Total 100 tie points in power lanes 1 Double strip, Total 300 tie points Perfect for Arduino shield prototyping and testing Plastic housing, metal contact clips

BDT 88

BDT 88 tax incl.

BDT 88 tax excl.

BDT 88 tax incl.

BDT 0 Tax

BDT 88 tax excl.

BDT 0 Tax

BDT 88 tax incl.

In-Stock

In stock: 248

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)

Choose your desire Resistor value from below:

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 771

Reference: RBD-2639

Male to Male Jumper Wires 20 Pcs 20cm

(0)

Connect components on breadboards and PCBs easily. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-male connector design for simple use. Colorful for easy identification and organization.

BDT 55

BDT 55 tax incl.

BDT 55 tax excl.

BDT 55 tax incl.

BDT 0 Tax

BDT 55 tax excl.

BDT 0 Tax

BDT 55 tax incl.

Last items in stock

In stock: 2

Reference: RBD-0768

5 mm Red LED (Pack of 5)

(0)

Size: 5mm Color: RED Head Shape: Round Lens Appearance: Transparent

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 909

Reference: 0766

Ohm (Ω) 1/4w Resistors - Pack of 5

(0)

Choose your desire Resistor value from below:

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 4518

Reference: RBD-1875

Cable For Arduino Leonardo/ DUE (USB A to Micro B)-30cm

(0)

BDT 185

BDT 185 tax incl.

BDT 185 tax excl.

BDT 185 tax incl.

BDT 0 Tax

BDT 185 tax excl.

BDT 0 Tax

BDT 185 tax incl.

In-Stock

In stock: 167

ESP32 DHT11 WIFI Bluetooth Temperature Humidity Soil Moisture Sensor Module for Arduino

(0)

ESP32 Bluetooth Wi-Fi development board, support NodeMCU / Arduino DHT11 temperature and humidity sensor CP2104 communication chip USB TO TTL Micro USB port Soil probe (long) soil temperature and humidity detection module 18650 Lithium Battery Holder Powered (Battery is not included)

BDT 2,499

BDT 2,499 tax incl.

BDT 2,499 tax excl.

BDT 2,499 tax incl.

BDT 0 Tax

BDT 2,499 tax excl.

BDT 0 Tax

BDT 2,499 tax incl.

In-Stock

In stock: 20

Reference: RBD-0948

ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

(0)

Built-in Flash: 32Mbit Power supply: 5V WiFi protocol: IEEE 802.11 b/g/n Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S Logic level: 3.3V A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and...

BDT 427

BDT 427 tax incl.

BDT 427 tax excl.

BDT 427 tax incl.

BDT 0 Tax

BDT 427 tax excl.

BDT 0 Tax

BDT 427 tax incl.

In-Stock

In stock: 406

Reference: RBD-1407

ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera

(0)

Setup Instructions: 1. Do not upload any code initially—the board we’ve provided already comes with default firmware preloaded. 2. To test the ESP32-CAM, first connect the camera ribbon cable to the board. (Important) 3. Insert an SD Card. (Important) 4. Use an MB programmer board and power the setup with a high-quality USB cable. (Important) 5. Then, on...

BDT 940

BDT 940 tax incl.

BDT 940 tax excl.

BDT 940 tax incl.

BDT 0 Tax

BDT 940 tax excl.

BDT 0 Tax

BDT 940 tax incl.

In-Stock

In stock: 165

Reference: RBD-0694

ESP8266 CH340 NodeMCU Wifi Module Lua V3

(0)

Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...

BDT 350

BDT 350 tax incl.

BDT 350 tax excl.

BDT 350 tax incl.

BDT 0 Tax

BDT 350 tax excl.

BDT 0 Tax

BDT 350 tax incl.

In-Stock

In stock: 401

Reference: RBD-1810

L293D Shield for NodeMCU V2

(0)

Motor Power Range: 4.5V ~ 36V Control supply range: 4.5V ~ 9V Logical operating current Iss: ≤60mA Driving part of the work current Io: ≤1.2A Maximum power dissipation: 4W (T = 90 ℃) Operating temperature : -25 ℃ ~ + 125 ℃ Drive Type: Dual high-power H-bridge driver

BDT 185

BDT 185 tax incl.

BDT 185 tax excl.

BDT 185 tax incl.

BDT 0 Tax

BDT 185 tax excl.

BDT 0 Tax

BDT 185 tax incl.

In-Stock

In stock: 19

LILYGO TTGO LoRa32 915Mhz ESP32 OLED 0.96 Inch Wireless Module Robotics Bangladesh

Reference: RBD-1765

LILYGO TTGO LoRa32 433/470Mhz ESP32 OLED 0.96 Inch Wireless Module

(0)

LILYGO TTGO Model: 433MHZ CH9102F T3_V1.6.1 LoRa32 V2.1_1.6 Version 433Mhz ESP32 LoRa OLED 0.96 Inch SD Card Bluetooth WIFI Wireless Module ESP-32 SMA

BDT 4,400

BDT 4,400 tax incl.

BDT 4,400 tax excl.

BDT 4,400 tax incl.

BDT 0 Tax

BDT 4,400 tax excl.

BDT 0 Tax

BDT 4,400 tax incl.

In-Stock

In stock: 11

Reference: RBD-1806

LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

(0)

Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA

BDT 2,750

BDT 2,750 tax incl.

BDT 2,750 tax excl.

BDT 2,750 tax incl.

BDT 0 Tax

BDT 2,750 tax excl.

BDT 0 Tax

BDT 2,750 tax incl.

In-Stock

In stock: 13

Reference: RBD-1402

NodeMCU ESP8266 Expansion Base Board

(0)

The perfect solution for breaking out the pins from Lua V3 Nodemcu. Lead-out all the IO ports of the ESP-12E development board Lead out the pins of 5V and 3.3V power supply Convenient to connect with peripheral modules Onboard 5V / 1A DC-DC step-down converter circuit Onboard power indicator With DC power jack 6-24V.

BDT 260

BDT 260 tax incl.

BDT 260 tax excl.

BDT 260 tax incl.

BDT 0 Tax

BDT 260 tax excl.

BDT 0 Tax

BDT 260 tax incl.

In-Stock

In stock: 6

Reference: RBD-1255

NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board

(0)

Integrated 0.96″ OLED Micro USB connection Compatible with Arduino Compatible with NodeMCU(Lua for ESP8266) Input Power 5V Compatible for Arduino Compatible with NodeMCU(Lua for ESP8266)A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please...

BDT 1,250

BDT 1,250 tax incl.

BDT 1,250 tax excl.

BDT 1,250 tax incl.

BDT 0 Tax

BDT 1,250 tax excl.

BDT 0 Tax

BDT 1,250 tax incl.

In-Stock

In stock: 14

Reference: RBD-1558

TTGO Meshtastic T-Beam V1.1 ESP32 WiFi Bluetooth GPS with OLED

(0)

TTGO Meshtastic T-Beam V1.1 ESP32 915Mhz or 433Mhz (Ships Random) WiFi Bluetooth ESP32 GPS NEO-6M SMA 18650 Battery Holder OLED (915Mhz OLED)

BDT 7,290

BDT 7,290 tax incl.

BDT 7,290 tax excl.

BDT 7,290 tax incl.

BDT 0 Tax

BDT 7,290 tax excl.

BDT 0 Tax

BDT 7,290 tax incl.

In-Stock

In stock: 14

TTGO T-Call ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board Robotics Bangladesh

Reference: RBD-1412

TTGO T-Call AM-036 ESP32 Wireless Module GPRS Antenna SIM Card SIM800L Board

(0)

Chipset :ESPRESSIF-ESP32 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor FLASH: QSPI flash 4MB / PSRAM 8MB SRAM:520 kB SRAM Button: Reset USB to TTL: CP2104 Modular interface: UART,SPI,SDIO,I2C,PWM,TV PWM,I2S,IRGPIO On-board clock:40MHz crystal oscillator Working voltage:2.7V-3.6V Working current: About 70mANote : AM-036 printed on board...

BDT 2,295

BDT 2,295 tax incl.

BDT 2,295 tax excl.

BDT 2,295 tax incl.

BDT 0 Tax

BDT 2,295 tax excl.

BDT 0 Tax

BDT 2,295 tax incl.

In-Stock

In stock: 13

Follow us on Facebook

Facebook