Home

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: HMI
  • Categories: Orange Pi
  • Categories: RFID/ NFC
  • Categories: Solar Panel
  • Condition: New
Mini Solar Panel 80*60mm with Wire Robotics Bangladesh Quick view

Reference: RBD-2931

Mini Solar Panel 80*60mm with Wire

(0)
The Mini Solar Panel 80*60mm with Wire for DIY Projects is ready to use without requiring a frame or special modifications. We have chosen to sell these Polycrystalline solar cells because they are Laser cut to the proper size and encapsulated in the special sun and weather-resistant materials which give them unique characteristics. RoboticsBD
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In stock
In stock: 50
13.56MHz RFID IC Key Tag Robotics Bangladesh Quick view

Reference: RBD-2281

13.56MHz RFID IC Key Tag

(0)
Material: ABS Dimension(LxWxH): 43.7×30.5×5.3mm Response Frequency: 13.56MHz Chip type: FM1108 Fudan Chip Memory capacity: 8 kbit Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 149
Out-of-Stock Flexible TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,540.00
BDT 3,540.00 tax incl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax incl.
BDT 3,540.00 tax incl.
BDT 0.00 Tax
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 0.00 Tax
BDT 3,540.00 tax incl.
More
Out-of-Stock
In stock: -10
Red White
RFID Reader Module 125KHz TK4100 RF UART IO Output Board For Access Control Robotics Bangladesh Quick view

Reference: RBD-2372

RFID Reader Module 125KHz TK4100 RF UART IO Output Board For Access Control

(0)
This product is an ID card decoding module. After sensing the ID card, it will actively decode and output the 10-digit card number. It also has an output port that can output high and low levels, which can meet the requirements of general ID cards, such as reading, deleting, and registering. Card operation!
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In stock
In stock: 27
Out-of-Stock PETG Filament Plastic For 3D Printer 1. Quick view

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640.00
BDT 3,640.00 tax incl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax incl.
BDT 3,640.00 tax incl.
BDT 0.00 Tax
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 0.00 Tax
BDT 3,640.00 tax incl.
More
Out-of-Stock
In stock: 0
Red Black Blue White
ZKTeco JC-880 Face Recognition Attendance Machine Robotics Bangladesh Quick view

Reference: RBD-2535

ZKTeco JC-880 Face Recognition Attendance Machine

(0)
Face recognition attendance machine Fingerprint recognition attendance machine Access control system Multi-language 2.8-inch color screen
BDT 19,799.00
BDT 19,799.00 tax incl.
BDT 19,799.00 tax excl.
BDT 19,799.00 tax excl.
BDT 19,799.00 tax incl.
BDT 19,799.00 tax incl.
BDT 0.00 Tax
BDT 19,799.00 tax excl.
BDT 19,799.00 tax excl.
BDT 0.00 Tax
BDT 19,799.00 tax incl.
More
Last items in stock
In stock: 2
Out-of-Stock TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9
Black White
Out-of-Stock Colored UV Resin 500mL Black Robotics Bangladesh Quick view

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0
3D Scanner Laser Desktop- DIY Red Robotics Bangladesh Quick view

Reference: RBD-1227

3D Scanner Laser Desktop- DIY Red

(0)
Object Scanning Device with USB 2.0 Interface / CMOS Sensor
BDT 18,999.00
BDT 18,999.00 tax incl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax incl.
BDT 18,999.00 tax incl.
BDT 0.00 Tax
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 0.00 Tax
BDT 18,999.00 tax incl.
More
Last items in stock
In stock: 2
3D Pen 2nd Generation LED Display Screen with (6 Color Filament) Robotics Bangladesh Quick view

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

(0)
Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
Last items in stock
In stock: 1
PLA Filament for 3D Pen Robotics Bangladesh Quick view

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 175
Mini Cooling Fan 12V DC Quick view

Reference: RBD-0727

12V Mini Cooling Fan 40x40x10mm

(0)
Operating Voltage: 12VDC Power Consumption: 1.42 W Body and Blade Constructed from Thermoplastic PBT of UL 94V-0 Single Phase 4 Pole Brushless DC Motor Precise Vapo Bearing Counterclockwise Rotation Direction if Viewed from front of Fan Blade
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 95
3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA Quick view

Reference: RBD-0436

3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA

(0)
Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 2
DRV8825 Stepper Motor Driver Module Quick view

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2
A4988 StepStick Stepper Motor Driver Module Quick view

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65
5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Quick view

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
In-Stock
In stock: 11
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5
Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh Quick view

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43
Micro Limit Switches Robotics Bangladesh Quick view

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28
Out-of-Stock Makeblock XY-Plotter Robot Kit V2 Robotics Bangladesh Quick view

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

(0)
XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving
BDT 25,800.00
BDT 25,800.00 tax incl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax incl.
BDT 25,800.00 tax incl.
BDT 0.00 Tax
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 0.00 Tax
BDT 25,800.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock mDrawbot kit Robotics Bangladesh Quick view

Reference: RBD-1311

mDrawbot kit

(0)
mDrawBot is a 4-in-1 drawing robot kit  it can be assembled into 4 different drawing robots:  mScara. mCar.  mSpider.  mEggBot.
BDT 21,300.00
BDT 21,300.00 tax incl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax incl.
BDT 21,300.00 tax incl.
BDT 0.00 Tax
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 0.00 Tax
BDT 21,300.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit Robotics Bangladesh Quick view

Reference: RBD-1752

Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit

(0)
Ortur Laser Master 2 Model: Ortur OLM2-LU1-4 20W Year: 2021 Engrave Area: 400mm x 430m Available Laser Modules: 20W Model – Laser Power: 5000-5500 MW Laser Engraver and Cutter Kit
BDT 41,000.00
BDT 41,000.00 tax incl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax incl.
BDT 41,000.00 tax incl.
BDT 0.00 Tax
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 0.00 Tax
BDT 41,000.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Anycubic I3 Mega S 3D Printer Robotics Bangladesh Quick view

Reference: 1265

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 38,999.00
BDT 38,999.00 tax incl.
BDT 38,999.00 tax excl.
BDT 38,999.00 tax excl.
BDT 38,999.00 tax incl.
BDT 38,999.00 tax incl.
BDT 0.00 Tax
BDT 38,999.00 tax excl.
BDT 38,999.00 tax excl.
BDT 0.00 Tax
BDT 38,999.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Anycubic I3 Mega 3D Printer Robotics Bangladesh Quick view

Reference: 1113

Brand: Anycubic

Anycubic I3 Mega 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 30,999.00
BDT 30,999.00 tax incl.
BDT 30,999.00 tax excl.
BDT 30,999.00 tax excl.
BDT 30,999.00 tax incl.
BDT 30,999.00 tax incl.
BDT 0.00 Tax
BDT 30,999.00 tax excl.
BDT 30,999.00 tax excl.
BDT 0.00 Tax
BDT 30,999.00 tax incl.
More
Out-of-Stock
In stock: 0
PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13
Yellow Red Black Blue Gray Cyan Orange White Green Red Copper
3D Printer Nozzle M7 Thread Brass 1. Quick view

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28
Creality K1 Max AI Fast 3D Printer Robotics Bangladesh Quick view

Reference: RBD-2526

Brand: Creality Official

Creality K1 Max AI Fast 3D Printer

(0)
 600mm/s Max Speed  20000mm/s² Acceleration  32mm³/s Max Flow Hotend  Hands-free Auto Leveling  Self-test with One Tap  Solve Ringing with G-sensor  Unibody Die-cast Frame AI-assisted Carefree Printing
BDT 173,525.00
BDT 173,525.00 tax incl.
BDT 173,525.00 tax excl.
BDT 173,525.00 tax excl.
BDT 173,525.00 tax incl.
BDT 173,525.00 tax incl.
BDT 0.00 Tax
BDT 173,525.00 tax excl.
BDT 173,525.00 tax excl.
BDT 0.00 Tax
BDT 173,525.00 tax incl.
More
Pre-Order (Delivery Time 1 month)
In stock: 0
Creality CR-M4 3D Printer Robotics Bangladesh Quick view

Reference: RBD-2525

Brand: Creality Official

Creality CR-M4 3D Printer

(0)
Large format build volume (450x450x470mm) Quasi-industrial grade construction Dual Y-axis linear rails 25-point auto-leveling Flexible PC surface
BDT 204,035.00
BDT 204,035.00 tax incl.
BDT 204,035.00 tax excl.
BDT 204,035.00 tax excl.
BDT 204,035.00 tax incl.
BDT 204,035.00 tax incl.
BDT 0.00 Tax
BDT 204,035.00 tax excl.
BDT 204,035.00 tax excl.
BDT 0.00 Tax
BDT 204,035.00 tax incl.
More
Pre-Order (Delivery Time 1 month)
In stock: 0
Roller Lever Endstop Limit Switch Module Robotics Bangladesh Quick view

Reference: RBD-2832

Roller Lever Endstop Limit Switch Module

(0)
Designed for use as an endstop for 3D printers but it can be used for other contact detection applications as well.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 30
Impact Switch Collision Switch Sensor Module Robotics Bangladesh Quick view

Reference: RBD-2833

Impact Switch Collision Switch Sensor Module

(0)
Type: Vibration Sensors Output: Switching Transducer Dimensions: 25 x 14 x 6 (LxWxH) mm Weight: 3 gm
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In stock
In stock: 50
Back to top

Follow us on Facebook

Facebook