• Banner

Active filters
  • Categories: 3D Printed
  • Categories: Enclosure
  • Categories: Keypad /Touch/ Human Interface

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1347

TTP223 Capacitive Touch switch Digital Touch Sensor Module For Arduino

(0)
TTP223 Capacitive Touch switch Digital Touch Sensor Module for Arduino UNO DUE MEGA TTP223 capacitive touch single IC. Onboard level indicator. Working voltage: 2.0V to 5.5V.
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 53

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

(0)
Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)
BDT 10,590.00
BDT 10,590.00 tax incl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax incl.
BDT 10,590.00 tax incl.
BDT 0.00 Tax
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 0.00 Tax
BDT 10,590.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

(0)
Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
BDT 3,099.00
BDT 3,099.00 tax incl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax incl.
BDT 3,099.00 tax incl.
BDT 0.00 Tax
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 0.00 Tax
BDT 3,099.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1167

Brand: Waveshare

Raspberry Pi 7inch HDMI Touchscreen LCD with Case

(0)
Resolution:1024 x 600 Display Port: HDMI Touch Type: Capacitive Touch Points:5 points 7-inch IPS screen with a hardware resolution of 1024×600. 5-points capacitive touch control. Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
BDT 7,990.00
BDT 7,990.00 tax incl.
BDT 7,990.00 tax excl.
BDT 7,990.00 tax excl.
BDT 7,990.00 tax incl.
BDT 7,990.00 tax incl.
BDT 0.00 Tax
BDT 7,990.00 tax excl.
BDT 7,990.00 tax excl.
BDT 0.00 Tax
BDT 7,990.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0947

Raspberry Pi HDMI Touch Display 5 Inch 800x480

(0)
5-inch LCD display. 800×480 screen resolution. 170º viewing angle. HDMI interface for displaying. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch. Raspberry Pi, Windows, Jetson Nano, BB Black, Banana Pi device & system support.
BDT 4,250.00
BDT 4,250.00 tax incl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax incl.
BDT 4,250.00 tax incl.
BDT 0.00 Tax
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 0.00 Tax
BDT 4,250.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0939

Mini Wireless 2.4GHz Keyboard with Mouse Touchpad Remote Control, Backlight

(0)
RGB Backlight Keys Onboard trackpad with all mouse function Left+Right click Gaming keys Operate on inbuilt Rechargeable battery Navigation, Volume Rockers and Home key Portable Pocket Size Plug and Play operation, No drivers needed to install Compatible with all Devices and operating Systems
BDT 899.00
BDT 899.00 tax incl.
BDT 899.00 tax excl.
BDT 899.00 tax excl.
BDT 899.00 tax incl.
BDT 899.00 tax incl.
BDT 0.00 Tax
BDT 899.00 tax excl.
BDT 899.00 tax excl.
BDT 0.00 Tax
BDT 899.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-2696

HC-SR04 Ultrasonic Sensor Housing

(0)
Custom 3D-printed enclosure designed specifically for the HC-SR04 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. For convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 85.00
BDT 85.00 tax incl.
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 85.00 tax incl.
BDT 85.00 tax incl.
BDT 0.00 Tax
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 0.00 Tax
BDT 85.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0752

Mini Wireless Keyboard with Touchpad Mouse for Raspberry pi and windows

(0)
Onboard trackpad with all mouse function Left+Right click Gaming keys Operate on inbuilt Rechargeable battery Navigation, Volume Rockers and Home key Portable Pocket Size Plug and Play operation, No drivers needed to install Compatible with all Devices and operating Systems. RoboticsBD
BDT 900.00
BDT 900.00 tax incl.
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 900.00 tax incl.
BDT 900.00 tax incl.
BDT 0.00 Tax
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 0.00 Tax
BDT 900.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0663

TTP223B Digital Touch Sensor Capacitive Touch

(0)
Power supply voltage(VCC): 2.0, 3, 5.5 V. Output high VOH: 0.8VCC V Output low VOL: 0.3VCC V Response time (touch mode) : 60 mS Response time (low power mode) : 220 mS Can replace the traditional touch of a button Four M2 screws positioning holes for easy installation RoboticsBD
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 471

Reference: RBD-0416

TTP229 8 Channel Digital Capacitive Switch Touch Sensor Module for Arduino

(0)
Onboard 8 key TTP226 capacitive touch induction IC. RoboticsBD Onboard 8-way level indicator. Working voltage: 2.4 to 5.5 V. Modules, you can set the output mode, key output mode, the longest time and fast/low power output
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0340

Brand: Waveshare

5inch HDMI Touch Screen (B) + Bicolor Case (Original Waveshare)

(0)
Size: 5″ Resolution: 800×480 Display Port: HDMI Resistive touch control. Support backlight control, more power saving. RoboticsBD
BDT 6,300.00
BDT 6,300.00 tax incl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax incl.
BDT 6,300.00 tax incl.
BDT 0.00 Tax
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 0.00 Tax
BDT 6,300.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0339

Brand: Waveshare

3.5inch Resistive Touch Display (B) for Raspberry Pi

(0)
3.5inch Resistive Touch Display (B) For Raspberry Pi 480×320 IPS Screen SPI Check out New Product 3.5inch HDMI Display-B
BDT 3,900.00
BDT 3,900.00 tax incl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax incl.
BDT 3,900.00 tax incl.
BDT 0.00 Tax
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 0.00 Tax
BDT 3,900.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0274

Brand: Waveshare

Raspberry Pi 5inch Resistive Touch HDMI LCD

(0)
5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch :  Raspbian 5 inch HDMI with Touch Download Link    
BDT 4,850.00
BDT 4,850.00 tax incl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax incl.
BDT 4,850.00 tax incl.
BDT 0.00 Tax
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 0.00 Tax
BDT 4,850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0922

Slide Potentiometer 10K Linear Module Dual Output for Arduino

(0)
Dimensions: 91 x 21 x 30 mm(LxWxH) Weight: 18 gm. Voltage: 3.3V or 5V. Port: Analog. Resistance: 10K. Appn: Raspberry-Pi projects. DIY projects., Arduino projects.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 21

Reference: RBD-1370

Rotary Potentiometer with limit switch

(0)
Name: PTV09A-4020F-B103 Package/Case: POT
BDT 30.00
BDT 30.00 tax incl.
BDT 30.00 tax excl.
BDT 30.00 tax excl.
BDT 30.00 tax incl.
BDT 30.00 tax incl.
BDT 0.00 Tax
BDT 30.00 tax excl.
BDT 30.00 tax excl.
BDT 0.00 Tax
BDT 30.00 tax incl.
More
In-Stock
In stock: 96

Reference: RBD-2157

4×3 Matrix 12 Keyboard Keypad

(0)
Easy communication with any microcontroller. Tactile type switches. Over 1,000,000 operations per key. Contact rated for 12V dc @ 20mA. Over 1,000,000 operations per key.
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In-Stock
In stock: 92

Reference: RBD-2086

Momentary Tactile Push Button Module DC 5V Switch

(0)
Operating Voltage: 5V Contact Resistance : 50mΩ max (initial) Electrically Life:100,000 cycles Environment temperature: -25°C to +105°C Operating Force: 180/230(±20gf) Seal temperature:250ºC-280ºC I/O pins: 3 pins
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 140

Reference: RBD-2166

Nextion 7" Display NX8048K070 Resistive Touch Screen HMI Display

(0)
Nextion 7" Display NX8048K070 Resistive Touch Screen HMI Display High-quality touch screen panel with 800x480 resolution UART communication interface for easy integration with Arduino and Raspberry Pi Enhanced version with additional features like built-in RTC, data saving to Flash, GPIO support, larger flash capacity, and faster CPU Includes both...
BDT 14,450.00
BDT 14,450.00 tax incl.
BDT 14,450.00 tax excl.
BDT 14,450.00 tax excl.
BDT 14,450.00 tax incl.
BDT 14,450.00 tax incl.
BDT 0.00 Tax
BDT 14,450.00 tax excl.
BDT 14,450.00 tax excl.
BDT 0.00 Tax
BDT 14,450.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-2243

LilyPad Button Board

(0)
Wearable e-textile technology.  Designed with large sew tabs Button Board
BDT 30.00
BDT 30.00 tax incl.
BDT 30.00 tax excl.
BDT 30.00 tax excl.
BDT 30.00 tax incl.
BDT 30.00 tax incl.
BDT 0.00 Tax
BDT 30.00 tax excl.
BDT 30.00 tax excl.
BDT 0.00 Tax
BDT 30.00 tax incl.
More
In-Stock
In stock: 81

Reference: RBD-2244

LilyPad Slide Switch

(0)
Wearable e-textile technology.  Designed with large sew tabs Slide Switch
BDT 48.00
BDT 48.00 tax incl.
BDT 48.00 tax excl.
BDT 48.00 tax excl.
BDT 48.00 tax incl.
BDT 48.00 tax incl.
BDT 0.00 Tax
BDT 48.00 tax excl.
BDT 48.00 tax excl.
BDT 0.00 Tax
BDT 48.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-2290

PS2 Game Rocker Push Button Module for Arduino

(0)
X, Y axis output is two potentiometers, can read the twist angle through AD conversion. Press the rocker downward, you can move a touch switch, for digital output, has been pulled up. The original OMRON button has long life and good handle. It is suitable for two degrees of freedom steering gear pan tilt control or other remote control proportional...
BDT 795.00
BDT 795.00 tax incl.
BDT 795.00 tax excl.
BDT 795.00 tax excl.
BDT 795.00 tax incl.
BDT 795.00 tax incl.
BDT 0.00 Tax
BDT 795.00 tax excl.
BDT 795.00 tax excl.
BDT 0.00 Tax
BDT 795.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-2291

2 Channel PS2 Game Rocker Push Button Module For Arduino

(0)
Functional configuration: 2 PS2 game joysticks (2 analog voltages per channel) 1 digital level) 2 independent buttons (original button)   Product Features: The X and Y axes output are two potentiometers, and the twist angle can be read by AD conversion. Press the rocker down to send a touch switch, for digital output, has been pulled up Original Omron...
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-2317

5-way Tactile Navigation Switch

(0)
The  is a 4 way navigation switch (north, south, east, west) with a center push. Think of it as a mini joystick. Whilst the pins don’t align perfectly to a 2.54mm grid, it can be made to fit into a breadboard or perfboard by bending the pins.
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-2327

Brand: DFRobot

Self-powered Wireless Switch 433Mhz

(0)
In life, remote controllers can be seen everywhere, and most of them are inseparable from the battery. However, we often encounter problems when using the battery, for instance, it is troublesome to replace the battery, batteries are easy to corrode in a humid environment, or the waste batteries may cause serious environmental pollution. Do you know that...
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In stock
In stock: 5

Follow us on Facebook