• Banner

Active filters
  • Availability: In stock
  • Categories: 3D Printer
  • Categories: Display
  • Categories: Motor Driver
  • Categories: Orange Pi
  • Categories: Programmer
  • Categories: Raspberry Pi

Reference: RBD-2198

CH341 USB Programmer

(0)
Model: CH341 Series Main Chip: CH341B Dimensions in mm (LxWxH): 85 x 28 x 12 Weight (gm): 20 8-bit parallel in EPP or MEM mode
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 26

Reference: RBD-1724

DC-5V-35V 5A PWM Motor Speed Controller

(0)
Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 74

Reference: RBD-1423

Brand: Raspberry Pi Official

Raspberry Pi High Quality Camera with 6mm Lens

(0)
Sony IMX477R stacked, back-illuminated sensor. Resolution: 12.3 megapixels. Compatible with Raspberry Pi 1/2/3/4 boards Output: RAW12/10/8, COMP8 Back focus: Adjustable (12.5 mm–22.4 mm) Lens standards: C-mount, CS-mount (C-CS adapter included) IR cut filter: Integrated Wide Field of View suitable for CCTV applications Suitable for macro photography...
BDT 16,990.00
BDT 16,990.00 tax incl.
BDT 16,990.00 tax excl.
BDT 16,990.00 tax excl.
BDT 16,990.00 tax incl.
BDT 16,990.00 tax incl.
BDT 0.00 Tax
BDT 16,990.00 tax excl.
BDT 16,990.00 tax excl.
BDT 0.00 Tax
BDT 16,990.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1107

0.56 Inch 4 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 12 Low Current Consumption High Brightness Easy to Use with PCB Mounting as well as on Breadboard
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 77

Reference: RBD-2311

USB To Serial Cable TTL 4 Pin Rs 232 UART Converter Adapter Programming Module

(0)
USB 4 Pin TTL RS 232 UART Serial Converter Adapter Programming Module Cable. The PL-2303HX USB to TTL RS232 Serial converter is a low-cost USB to Serial Adapter.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-1961

Raspberry Pi Compatible 160° FOV 5MP Fisheye Lens Wide Angle Camera Module

(0)
Wide-angle fish-eye lens Manual Adjustable Focus Field of View Angle: 160° Easy to install and Use Useful for real-time Photography and Videos
BDT 1,490.00
BDT 1,490.00 tax incl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax incl.
BDT 1,490.00 tax incl.
BDT 0.00 Tax
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 0.00 Tax
BDT 1,490.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1810

L293D Shield for NodeMCU V2

(0)
Motor Power Range: 4.5V ~ 36V Control supply range: 4.5V ~ 9V Logical operating current Iss: ≤60mA Driving part of the work current Io: ≤1.2A Maximum power dissipation: 4W (T = 90 ℃) Operating temperature : -25 ℃ ~ + 125 ℃ Drive Type: Dual high-power H-bridge driver
BDT 185.00
BDT 185.00 tax incl.
BDT 185.00 tax excl.
BDT 185.00 tax excl.
BDT 185.00 tax incl.
BDT 185.00 tax incl.
BDT 0.00 Tax
BDT 185.00 tax excl.
BDT 185.00 tax excl.
BDT 0.00 Tax
BDT 185.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-1109

10 Digit LED Bar Graph Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 98

Reference: RBD-2315

Pogo Pin Probe Clip - 6 Pins with 2.54mm

(0)
Pin Pitch: 2.54mm Probe model: P75-E2 (pointed tip) Needle diameter: 1.3mm Needle sleeve model R75-3W Row pin number: 6Pin Row Number: Single row space between: 2.54mm
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-1912

L293D Motor Driver Module

(0)
New L293D motor shield, the input voltage DC4.5-25V 600mA output current capability per channel 1.2A peak output current(non-repetitive) per channel Enable facility Overtemperature protection Logical “0” input voltage up to 1.5V(High noise immunity)
BDT 215.00
BDT 215.00 tax incl.
BDT 215.00 tax excl.
BDT 215.00 tax excl.
BDT 215.00 tax incl.
BDT 215.00 tax incl.
BDT 0.00 Tax
BDT 215.00 tax excl.
BDT 215.00 tax excl.
BDT 0.00 Tax
BDT 215.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-1164

LCD Display 16X2 with Header

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-2362

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

(0)
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit...
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 18

Reference: RBD-2145

L298P Motor Driver Shield for Arduino

(0)
L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

(0)
Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
BDT 3,099.00
BDT 3,099.00 tax incl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax incl.
BDT 3,099.00 tax incl.
BDT 0.00 Tax
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 0.00 Tax
BDT 3,099.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0568

Brand: Raspberry Pi Official

Raspberry Pi Camera Module V2 - 8 Megapixel,1080p

(0)
Fixed focus lens on-board Improved resolution – 8-Megapixel native resolution sensor-capable of 3280 x 2464 pixel static images Supports 1080p30, 720p60 and 640x480p90 video Size 25mm x 23mm x 9mm Weight just over 3g Connects to the Raspberry Pi board via a short ribbon cable (supplied) Camera v2 is supported in the latest version of Raspbian, Raspberry...
BDT 4,690.00
BDT 4,690.00 tax incl.
BDT 4,690.00 tax excl.
BDT 4,690.00 tax excl.
BDT 4,690.00 tax incl.
BDT 4,690.00 tax incl.
BDT 0.00 Tax
BDT 4,690.00 tax excl.
BDT 4,690.00 tax excl.
BDT 0.00 Tax
BDT 4,690.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2412

USB ASP AVR Programming Device for ATMEL Processors Arduino

(0)
Compatible Chips:ATMega Series Tiny Series Classic Series CAN Series PWM Series You can also use this to recover your Arduino Bootloader
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-2158

TB6560 Single Axis 3A Stepper Motor Driver Board

(0)
Driver Chip: TB6560AHQ Operating Voltage: 10-35V Nominal Voltage: 24V With the large heat sink to ensure good heat dissipation 6N137 high-speed OptoCoupler, to ensure a high speed without step out.
BDT 780.00
BDT 780.00 tax incl.
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 780.00 tax incl.
BDT 780.00 tax incl.
BDT 0.00 Tax
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 0.00 Tax
BDT 780.00 tax incl.
More
In-Stock
In stock: 21

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

(0)
Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)
BDT 10,590.00
BDT 10,590.00 tax incl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax incl.
BDT 10,590.00 tax incl.
BDT 0.00 Tax
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 0.00 Tax
BDT 10,590.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0738

Raspberry Pi Camera 5MP

(0)
Resolution: 5 MP Interface Type: CSI(Camera Serial Interface) Dimensions: 25x23x8 (LxWxH) mm Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video Fully Compatible with Raspberry Pi 3 and 4 Model B Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
BDT 880.00
BDT 880.00 tax incl.
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 880.00 tax incl.
BDT 880.00 tax incl.
BDT 0.00 Tax
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 0.00 Tax
BDT 880.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-2413

FTDI Basic Breakout USBTTL 6PIN 5V Module Fio/Pro/RGB/Lilypad Programmer

(0)
Upgrade your Arduino Pro Mini, Lilypad and drone or RC aircraft with the ultimate ease and precision offered by our latest MWC MultiWii Lite/SE Flight Control Board Config Uploader. This innovative device comes packed with features designed to simplify the uploading and modification process. Save time and effort with the board's MINIUSB FTDI Basic USB...
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-2209

Servo Motor Controller Driver Board 16 Channels High Accuracy MCU Software

(0)
16 channels PWM servo motor driver controller board module Supports USB interface, TTL serial port, and Bluetooth communication Bluetooth communication can connect to Android phone or PC software Master chip STM32 series, frequency 48MHz Size 43.5x36mmx12mm, operating voltage 5V USB, TTL3.3V, servo motor supply 5-7.2V Channel 16, PWM accuracy 0.1ms
BDT 2,490.00
BDT 2,490.00 tax incl.
BDT 2,490.00 tax excl.
BDT 2,490.00 tax excl.
BDT 2,490.00 tax incl.
BDT 2,490.00 tax incl.
BDT 0.00 Tax
BDT 2,490.00 tax excl.
BDT 2,490.00 tax excl.
BDT 0.00 Tax
BDT 2,490.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-1219

3.5inch LCD Display Shield for Arduino

(0)
Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...
BDT 1,680.00
BDT 1,680.00 tax incl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax incl.
BDT 1,680.00 tax incl.
BDT 0.00 Tax
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 0.00 Tax
BDT 1,680.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0932

10.1 Inch IPS TFT Monitor HD 1280x800 Portable Color Display Screen

(0)
10.1 inch HD resolution(1280x800) IPS Monitor,Clear and colorful Screen. Multifunctional Monitor Screen: HDMI/VGA/BNC/USB/AV Input, Dual High-quality Built-in Speakers Support Raspberry Pi & Windows PC Automatically. Built-in Media Player with Remote.
BDT 10,990.00
BDT 10,990.00 tax incl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax incl.
BDT 10,990.00 tax incl.
BDT 0.00 Tax
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 0.00 Tax
BDT 10,990.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2416

WEMOS CH340G Breakout 5V 3.3V USB to Serial Module

(0)
5V (The max current depends on your USB port, usually 500mA) 3.3V (Using LDO, 300mA MAX) Use CH340G with stable performance. Driver: 1. CH340G USB to UART driver
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-2308

DC 3V-36V 15A Dual H-Bridge DC Motor Driver

(0)
This Dual Dc motor driver focuses on high efficiency and can withstand high current load, the maximum current up to 30A. 
BDT 1,650.00
BDT 1,650.00 tax incl.
BDT 1,650.00 tax excl.
BDT 1,650.00 tax excl.
BDT 1,650.00 tax incl.
BDT 1,650.00 tax incl.
BDT 0.00 Tax
BDT 1,650.00 tax excl.
BDT 1,650.00 tax excl.
BDT 0.00 Tax
BDT 1,650.00 tax incl.
More
In stock
In stock: 16

Reference: RBD-1735

Brand: Waveshare

Waveshare 10.1 Inch Capacitive Touch Screen LCD (B) with Case 1280×800 HDMI-Compatible IPS display

(0)
Original Waveshare IPS screen,1280x800 high resolution Capacitive touch control supports up to ten-points touch When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free Supports Banana Pi, Banana Pro, comes with Lubuntu,...
BDT 14,590.00
BDT 14,590.00 tax incl.
BDT 14,590.00 tax excl.
BDT 14,590.00 tax excl.
BDT 14,590.00 tax incl.
BDT 14,590.00 tax incl.
BDT 0.00 Tax
BDT 14,590.00 tax excl.
BDT 14,590.00 tax excl.
BDT 0.00 Tax
BDT 14,590.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1251

7 Inch TFT IPS Monitor for Raspberry Pi

(0)
Input Voltage: DC 7.4~35V. Input Current: DC 0.5A-1.5A. Power Consumption: ≤8W Watts. Resolution: 1024 x 600. Aspect Ratio: 16:9 & 4:3. Contrast Ratio: 500:1. Monitor Mount is not Available.
BDT 6,390.00
BDT 6,390.00 tax incl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax incl.
BDT 6,390.00 tax incl.
BDT 0.00 Tax
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 0.00 Tax
BDT 6,390.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Follow us on Facebook