Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 5.00 - BDT 204,035.00

Categories

Categories

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Communication Module
  • Categories: Mini Computer/ PC
  • Categories: Orange Pi
  • Categories: Raspberry Pi
  • Categories: Sensors

Reference: RBD-0443

GPRS GSM SIM900 Arduino Shield

(0)
Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
BDT 2,400.00
BDT 2,400.00 tax incl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax incl.
BDT 2,400.00 tax incl.
BDT 0.00 Tax
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 0.00 Tax
BDT 2,400.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)
Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In-Stock
In stock: 239

Reference: RBD-1971

Brand: DFRobot

Gravity: Expansion Board for Raspberry Pi Pico

(0)
Gravity Expansion Board Designed for Raspberry Pi Pico Compatible with a variety of Gravity sensors and modules. Gravity Expansion Board for Pico All pins brought out, no soldering required Additional Communication Ports: Digital IO, Analog IO, I2C, SPI, UART, GDI Note: The product not include Raspberry Pi Pico. Buy Raspberry Pi Pico here. Buy Raspberry...
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1685

5050 12V RGB LED Strip For Computer Case 5x.05m Waterproof

(0)
5050 12V RGB Led Strip light 4pin LED Headers For PC, Computer Case  RGB Strip Mainboard Control Panel RGB-Header (+12V,G,R,B) 5x0.5m Waterproof
BDT 1,199.00 BDT 1,690.00
BDT 1,690.00 BDT 1,199.00 tax incl.
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 1,690.00 BDT 1,199.00 tax incl.
BDT 1,690.00 BDT 1,199.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 1,690.00 BDT 1,199.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,690.00 BDT 1,199.00 tax incl.
More
In-Stock
In stock: 21

Reference: RBD-0552

A6 Pro Serial GPRS GSM Module Core Development Board

(0)
Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz Working voltage: 4.8-9VDC(On-board voltage regulator circuit supply power for A6 module) Working Current: maximum of 2A. RoboticsBD
BDT 1,100.00
BDT 1,100.00 tax incl.
BDT 1,100.00 tax excl.
BDT 1,100.00 tax excl.
BDT 1,100.00 tax incl.
BDT 1,100.00 tax incl.
BDT 0.00 Tax
BDT 1,100.00 tax excl.
BDT 1,100.00 tax excl.
BDT 0.00 Tax
BDT 1,100.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0436

3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA

(0)
Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0318

SIM900A Mini Module 5V

(0)
This module is intended for advanced users who require moderate knowledge of GSM systems and microcontrollers. It needs wiring and firmware updates to unlock the country lock.  Dual-Band 900/ 1800 MHz GPRS multi-slot class 10/8GPRS mobile station class B Compliant to GSM phase 2/2+ Dimensions: 24*24*3 mm Weight: 3.4g Control via AT commands (GSM 07.07...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0272

Brand: Waveshare

Logic Level Converter

(0)
Voltage level: 1.8V-6V Dimension: 38mm x 31.6mm Conversion  level  range:  1.8 V-6 V Instructions for use:  (3.3 V,  5 V  to  each other) 4 pairs of power supply interfaces, supports more situation Use tantalum capacitors for power filter, provides more stability VCCB 5V  power supply  (can  be an external  5V power supply)
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
Out-of-Stock
In stock: -1

Reference: RBD-1961

Raspberry Pi Compatible 160° FOV 5MP Fisheye Lens Wide Angle Camera Module

(0)
Wide-angle fish-eye lens Manual Adjustable Focus Field of View Angle: 160° Easy to install and Use Useful for real-time Photography and Videos
BDT 1,490.00
BDT 1,490.00 tax incl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 1,490.00 tax incl.
BDT 1,490.00 tax incl.
BDT 0.00 Tax
BDT 1,490.00 tax excl.
BDT 1,490.00 tax excl.
BDT 0.00 Tax
BDT 1,490.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0288

GY-801 - Multi Sensor Board

(0)
Three selectable full scales (250/500/2000dps) Factor in all g-ranges, up to 13-bit resolution at ±16 g 12-Bit ADC Coupled with Low Noise ARM Sensors Achieves 5 milli-gauss Resolution in ±8 Gauss Fields Pressure range:300 to1100hPa (+9000m to -500m above sea level) I2C interfaces Power supply: 3-5v
BDT 2,200.00
BDT 2,200.00 tax incl.
BDT 2,200.00 tax excl.
BDT 2,200.00 tax excl.
BDT 2,200.00 tax incl.
BDT 2,200.00 tax incl.
BDT 0.00 Tax
BDT 2,200.00 tax excl.
BDT 2,200.00 tax excl.
BDT 0.00 Tax
BDT 2,200.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0311

YF-S201 Hall Effect Water Flow Meter / Sensor

(0)
Working Voltage: 5 to 18V DC (min tested working voltage 4.5V). RoboticsBD Max current draw: 15mA @ 5V. Working Flow Rate: 1 to 30 Liters/Minute. Maximum water pressure: 2.0 MPa. Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min). RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 40

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-0875

Windows 10 Mini PC Intel® Celeron J1900

(0)
Windows 10 Mini PC Intel® Celeron J1900 Processor: Intel Celeron J1900 Motherboard: PB-1900-A Chipset: Intel Bay Trail Host Bridge RAM: DDR3 8 GBytes Wireless Connectivity: WiFi, Bluetooth
BDT 15,000.00
BDT 15,000.00 tax incl.
BDT 15,000.00 tax excl.
BDT 15,000.00 tax excl.
BDT 15,000.00 tax incl.
BDT 15,000.00 tax incl.
BDT 0.00 Tax
BDT 15,000.00 tax excl.
BDT 15,000.00 tax excl.
BDT 0.00 Tax
BDT 15,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0430

Line Follower Sensor- 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Output format: 8 Analog and Digital voltages. Optimal sensing distance: 0.125″ (3 mm). RoboticsBD
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-2538

All-In-One Windows 10 PC Intel® Core™ i5 - 23.8 inch Touch Screen Kiosk PC

(0)
A kiosk PC Enhancing customer service Providing information Streamlining various processes in public spaces. Intel Core i5 - 3470 CPU at 3.20 GHz, 8GB DDR3 RAM Immersive 23.8-inch full-touch 1920x1080 display monitor Versatile connectivity with Wi-Fi and Bluetooth Streamlined design for a clean and futuristic look This kiosk PC has a user-friendly design...
BDT 49,599.00
BDT 49,599.00 tax incl.
BDT 49,599.00 tax excl.
BDT 49,599.00 tax excl.
BDT 49,599.00 tax incl.
BDT 49,599.00 tax incl.
BDT 0.00 Tax
BDT 49,599.00 tax excl.
BDT 49,599.00 tax excl.
BDT 0.00 Tax
BDT 49,599.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0932

10.1 Inch IPS TFT Monitor HD 1280x800 Portable Color Display Screen

(0)
10.1 inch HD resolution(1280x800) IPS Monitor,Clear and colorful Screen. Multifunctional Monitor Screen: HDMI/VGA/BNC/USB/AV Input, Dual High-quality Built-in Speakers Support Raspberry Pi & Windows PC Automatically. Built-in Media Player with Remote.
BDT 10,990.00
BDT 10,990.00 tax incl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 10,990.00 tax incl.
BDT 10,990.00 tax incl.
BDT 0.00 Tax
BDT 10,990.00 tax excl.
BDT 10,990.00 tax excl.
BDT 0.00 Tax
BDT 10,990.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
BDT 3,450.00
BDT 3,450.00 tax incl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax incl.
BDT 3,450.00 tax incl.
BDT 0.00 Tax
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 0.00 Tax
BDT 3,450.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0315

US-015 Ultrasonic Module Distance Measuring Transducer Sensor

(0)
Working voltage: DC 5 V Static current: 3 mA Working temperature: 0 ~ + 70° Output way: GPIO Induction Angle: Less than 15° Detection range:2 cm to 400 cm Detecting precision: 0.3 cm + 1% Sensor size: Approx. 45 x 20 x 1.6mm Hole diameter: Approx. 1mm. RoboticsBD
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 47

Reference: RBD-1735

Brand: Waveshare

Waveshare 10.1 Inch Capacitive Touch Screen LCD (B) with Case 1280×800 HDMI-Compatible IPS display

(0)
Original Waveshare IPS screen,1280x800 high resolution Capacitive touch control supports up to ten-points touch When works with Raspberry Pi, supports Raspbian, Ubuntu, single touch, and driver free When working as a computer monitor, supports Windows 10/8.1/8/7, ten-points touch, and driver free Supports Banana Pi, Banana Pro, comes with Lubuntu,...
BDT 14,590.00
BDT 14,590.00 tax incl.
BDT 14,590.00 tax excl.
BDT 14,590.00 tax excl.
BDT 14,590.00 tax incl.
BDT 14,590.00 tax incl.
BDT 0.00 Tax
BDT 14,590.00 tax excl.
BDT 14,590.00 tax excl.
BDT 0.00 Tax
BDT 14,590.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0320

MAX6675 Module + K Type Thermocouple Sensor (Arduino compatiable)

(0)
Internal integrated cold junction compensation circuit. RoboticsBD With a simple three serial SPI interface; Temperature signal can be converted into 12-bit digital Embedded thermocouple break detection circuitry. High impedance differential inputs. Operating Voltage(VDC): 3 to 5.5 Temperature Range(°C): 0 to +1024 Cold Junction Compensation Range(°C):...
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 14

Reference: RBD-0282

XBee USB Adapter

(0)
Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0201

FlySky 2.4Ghz 9CH RC Transmitter FS-TH9X (Upgrade)

(0)
QUICK OVERVIEW Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module Receiver: FS-IA10B Default Mode: Mode-2 Input Power: 12V DC (1.5V x 8  AAA Battery) Bidirectional System Frequencies-Hopping Omni-directional High Gain Antenna Low Power Consumption
BDT 6,950.00
BDT 6,950.00 tax incl.
BDT 6,950.00 tax excl.
BDT 6,950.00 tax excl.
BDT 6,950.00 tax incl.
BDT 6,950.00 tax incl.
BDT 0.00 Tax
BDT 6,950.00 tax excl.
BDT 6,950.00 tax excl.
BDT 0.00 Tax
BDT 6,950.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2118

27 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit

(0)
Interface Type: USB Glass: With Glass Response Time: less than 15ms Size: 27 inch, 10 Touch Point **The product is only available for in-store pickup, we do not ship this product as it is a fragile item. **Product Images are shown for illustrative purposes only and may differ from the actual product.
BDT 14,520.00
BDT 14,520.00 tax incl.
BDT 14,520.00 tax excl.
BDT 14,520.00 tax excl.
BDT 14,520.00 tax incl.
BDT 14,520.00 tax incl.
BDT 0.00 Tax
BDT 14,520.00 tax excl.
BDT 14,520.00 tax excl.
BDT 0.00 Tax
BDT 14,520.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

(0)
XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving
BDT 25,800.00
BDT 25,800.00 tax incl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax incl.
BDT 25,800.00 tax incl.
BDT 0.00 Tax
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 0.00 Tax
BDT 25,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Follow us on Facebook