Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 0.00 - BDT 204,035.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 28,800 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Communication Module
  • Categories: Components
  • Categories: Connector
  • Categories: Orange Pi
  • Categories: Programmer
  • Categories: Solar Panel

Reference: RBD-0318

SIM900A Mini Module 5V

(0)
This module is intended for advanced users who require moderate knowledge of GSM systems and microcontrollers. It needs wiring and firmware updates to unlock the country lock.  Dual-Band 900/ 1800 MHz GPRS multi-slot class 10/8GPRS mobile station class B Compliant to GSM phase 2/2+ Dimensions: 24*24*3 mm Weight: 3.4g Control via AT commands (GSM 07.07...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0280

Mini Breadboard

(0)
Tie-points: 170 (10×17) Size: 48 x 35 x 10 mm(LxWxH). Use: experimental, testing, robot Matching jumper, diameter 0.8mm Phosphor bronze nickel plated spring clips Accepts a variety of wire sizes (29-20 the AWG) **1 pcs Random Color
BDT 45.00
BDT 45.00 tax incl.
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 45.00 tax incl.
BDT 45.00 tax incl.
BDT 0.00 Tax
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 0.00 Tax
BDT 45.00 tax incl.
More
In-Stock
In stock: 633

Reference: RBD-2311

USB To Serial Cable TTL 4 Pin Rs 232 UART Converter Adapter Programming Module

(0)
USB 4 Pin TTL RS 232 UART Serial Converter Adapter Programming Module Cable. The PL-2303HX USB to TTL RS232 Serial converter is a low-cost USB to Serial Adapter.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-0989

18650 Battery Holder – 1 Cell

(0)
Hold A standard 18650 batteries Wire : 15cm Output: 3.7v Dimension (Appro.): 76x20x20xmm Weight: 8gm High-quality plastic material
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In-Stock
In stock: 135

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0314

Double-ended 50cm Cable Crocodile Clips

(0)
Colour: Red, Green, Yellow, White, and Black, etc. Cable length: 40 cm. RoboticsBD Net weight: 50 gm. They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends. RoboticsBD *You will receive 1 pcs cable of random color.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2315

Pogo Pin Probe Clip - 6 Pins with 2.54mm

(0)
Pin Pitch: 2.54mm Probe model: P75-E2 (pointed tip) Needle diameter: 1.3mm Needle sleeve model R75-3W Row pin number: 6Pin Row Number: Single row space between: 2.54mm
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-0942

XT60 Connector 3.5mm Male and Female pair

(0)
Manufacturer: AMASS Type of connector:  DC supply Connector series:  XT60H Kind of connector:  Female Number of pins:  2
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

(0)
Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-2362

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

(0)
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit...
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 18

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0999

AA Battery Holder 4S with Barrel Jack Connector

(0)
Holds 4 AA batteries The standard 5.5×2.1mm barrel jack at the output. Easy install, convenient to use. Dimensions mm (LxWxH): 62 x 58 x 15 Weight: 15 gm Material: Plastic Internal Connection: Series
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0343

Thermoelectric Cooler Peltier Module TEC1-12706

(0)
Model number: TEC1-12706 Operating Voltage: 12V Maximum Voltage Umax (V) : 15.4V Maximum Current Imax (A) : 6A Maximum Power: 92 W Maximum Temperature: 138°C Power Cord: 200mm.RoboticsBD
BDT 298.00
BDT 298.00 tax incl.
BDT 298.00 tax excl.
BDT 298.00 tax excl.
BDT 298.00 tax incl.
BDT 298.00 tax incl.
BDT 0.00 Tax
BDT 298.00 tax excl.
BDT 298.00 tax excl.
BDT 0.00 Tax
BDT 298.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-2412

USB ASP AVR Programming Device for ATMEL Processors Arduino

(0)
Compatible Chips:ATMega Series Tiny Series Classic Series CAN Series PWM Series You can also use this to recover your Arduino Bootloader
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-0344

Weighing Sensor 24 Bit Load Cell Amplifier HX711

(0)
Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit. RoboticsBD
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-2413

FTDI Basic Breakout USBTTL 6PIN 5V Module Fio/Pro/RGB/Lilypad Programmer

(0)
Upgrade your Arduino Pro Mini, Lilypad and drone or RC aircraft with the ultimate ease and precision offered by our latest MWC MultiWii Lite/SE Flight Control Board Config Uploader. This innovative device comes packed with features designed to simplify the uploading and modification process. Save time and effort with the board's MINIUSB FTDI Basic USB...
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-1185

2Pin 8.5mm PCB Screw Terminal Connector

(0)
Rated Voltage: 300V Rated Current: 20A Withstanding Voltage: AC2000V/1Min Wire Range: 22-12 AWG
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
In-Stock
In stock: 52

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
BDT 3,450.00
BDT 3,450.00 tax incl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax incl.
BDT 3,450.00 tax incl.
BDT 0.00 Tax
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 0.00 Tax
BDT 3,450.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 309.00
BDT 309.00 tax incl.
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 309.00 tax incl.
BDT 309.00 tax incl.
BDT 0.00 Tax
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 0.00 Tax
BDT 309.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-2416

WEMOS CH340G Breakout 5V 3.3V USB to Serial Module

(0)
5V (The max current depends on your USB port, usually 500mA) 3.3V (Using LDO, 300mA MAX) Use CH340G with stable performance. Driver: 1. CH340G USB to UART driver
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1184

2 Pin Pitch 5.0mm Straight Pin Screw PCB Terminal Block Connector

(0)
5.08mm pitch. Pin header: Tin plated brass. Contacts: Nickel plated brass. Strong, compact, lightweight. Heat resistant.
BDT 10.00
BDT 10.00 tax incl.
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 10.00 tax incl.
BDT 10.00 tax incl.
BDT 0.00 Tax
BDT 10.00 tax excl.
BDT 10.00 tax excl.
BDT 0.00 Tax
BDT 10.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-0688

RF Transmitter Receiver Pair 433 MHz

(0)
Wide input supply (2.5 V to 12V) Easy to integrate (V+, GND, and Data) The device in deep sleep mode when Data pin is grounded Very small dimension.
BDT 117.00
BDT 117.00 tax incl.
BDT 117.00 tax excl.
BDT 117.00 tax excl.
BDT 117.00 tax incl.
BDT 117.00 tax incl.
BDT 0.00 Tax
BDT 117.00 tax excl.
BDT 117.00 tax excl.
BDT 0.00 Tax
BDT 117.00 tax incl.
More
In-Stock
In stock: 145

Reference: RBD-0397

MCP2515 CAN Bus Module TJA1050 Receiver SPI Module For Arduino

(0)
Support CAN V2.0B technical standard, communication rate 1Mb / S. Module 5V DC power supply, SPI interface protocol control 0 to 8 bytes long data field. 8MHZ crystal oscillator 120Ω terminal resistance Use High-speed CAN transceiver TJA1050 Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation The...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-0349

Digispark Kickstarter ATTINY85 Arduino General Micro USB Development Board

(0)
Support for the Arduino IDE 1.0 + (OSX/Windows/Linux). Power via USB or External Source or 7-16 v to 5 v (automatic selection).RoboticsBD The Onboard, 150 ma 5 v Regulator. Built-in USB and serial were debugging). 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming...
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 157

Reference: RBD-0282

XBee USB Adapter

(0)
Specifications: - 3.3V and 5V dual power output- 3.3V and 5V IO compatible- USB2.0 protocol- BitBang mode ready- Easily connected to PC via mini USB cable- Support XBee-setting with software X-CTU
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0201

FlySky 2.4Ghz 9CH RC Transmitter FS-TH9X (Upgrade)

(0)
QUICK OVERVIEW Transmitter: FS-TH9X Upgrade with FS-RM003 2.4GHz Module Receiver: FS-IA10B Default Mode: Mode-2 Input Power: 12V DC (1.5V x 8  AAA Battery) Bidirectional System Frequencies-Hopping Omni-directional High Gain Antenna Low Power Consumption
BDT 6,950.00
BDT 6,950.00 tax incl.
BDT 6,950.00 tax excl.
BDT 6,950.00 tax excl.
BDT 6,950.00 tax incl.
BDT 6,950.00 tax incl.
BDT 0.00 Tax
BDT 6,950.00 tax excl.
BDT 6,950.00 tax excl.
BDT 0.00 Tax
BDT 6,950.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Follow us on Facebook