Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 1,600,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Display
  • Categories: Learning Kit
  • Categories: Programmer
  • Categories: Robotics Parts
  • Categories: Robots
  • Categories: Solar Panel

Reference: RBD-0034

Servo Motor MG996R 180 Degree Rotation

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 165

Reference: RBD-2633

SteerEase Obstacle Avoiding Robot - Plug and Play

(0)
Plug-and-play obstacle avoiding robot Ultrasonic sensor detects and avoids obstacles Up to 3 hours runtime on a full charge Compact and portable design Ideal for beginners and hobbyists
BDT 6,500.00
BDT 6,500.00 tax incl.
BDT 6,500.00 tax excl.
BDT 6,500.00 tax excl.
BDT 6,500.00 tax incl.
BDT 6,500.00 tax incl.
BDT 0.00 Tax
BDT 6,500.00 tax excl.
BDT 6,500.00 tax excl.
BDT 0.00 Tax
BDT 6,500.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2311

USB To Serial Cable TTL 4 Pin Rs 232 UART Converter Adapter Programming Module

(0)
USB 4 Pin TTL RS 232 UART Serial Converter Adapter Programming Module Cable. The PL-2303HX USB to TTL RS232 Serial converter is a low-cost USB to Serial Adapter.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-1109

10 Digit LED Bar Graph Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 98

Reference: RBD-0796

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

(0)
Three DOF (degree of freedom) leg  Can walk in any direction.  Maximum torque of 13kg for the legs.
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0670

Brand: RoboticsBD

Electric Mini Drill

(0)
Color: Grey Speed: 8500 RPM Collet Size: 0.5-3.0mm Full Accessories Set (14 pcs) 
BDT 1,060.00
BDT 1,060.00 tax incl.
BDT 1,060.00 tax excl.
BDT 1,060.00 tax excl.
BDT 1,060.00 tax incl.
BDT 1,060.00 tax incl.
BDT 0.00 Tax
BDT 1,060.00 tax excl.
BDT 1,060.00 tax excl.
BDT 0.00 Tax
BDT 1,060.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-2315

Pogo Pin Probe Clip - 6 Pins with 2.54mm

(0)
Pin Pitch: 2.54mm Probe model: P75-E2 (pointed tip) Needle diameter: 1.3mm Needle sleeve model R75-3W Row pin number: 6Pin Row Number: Single row space between: 2.54mm
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-1701

Brand: SparkFun Electronics

Capacitance Meter DIY Kit

(0)
Capacitance Meter DIY Kit Sparkfun Electronics
BDT 1,300.00
BDT 1,300.00 tax incl.
BDT 1,300.00 tax excl.
BDT 1,300.00 tax excl.
BDT 1,300.00 tax incl.
BDT 1,300.00 tax incl.
BDT 0.00 Tax
BDT 1,300.00 tax excl.
BDT 1,300.00 tax excl.
BDT 0.00 Tax
BDT 1,300.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1164

LCD Display 16X2 with Header

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0299

SteerEase Arduino Based Fire Fighting Robot - Plug and Play

(0)
Assemble & Fight Fires: Learn and combat simulated fires with this complete Arduino-based fire-fighting robot kit. Plug-and-Play Simplicity: Pre-assembled components and clear instructions make building and programming your robot a breeze (no soldering required). Educational & Engaging: Explore robotics, coding, and fire safety principles through...
BDT 5,500.00
BDT 5,500.00 tax incl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax incl.
BDT 5,500.00 tax incl.
BDT 0.00 Tax
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 0.00 Tax
BDT 5,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0020

Servo Motor Micro SG90 180 Degree Rotation

(0)
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
BDT 149.00
BDT 149.00 tax incl.
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 149.00 tax incl.
BDT 149.00 tax incl.
BDT 0.00 Tax
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 0.00 Tax
BDT 149.00 tax incl.
More
In-Stock
In stock: 417

Reference: RBD-2362

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

(0)
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit...
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 18

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

(0)
Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
BDT 3,099.00
BDT 3,099.00 tax incl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax incl.
BDT 3,099.00 tax incl.
BDT 0.00 Tax
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 0.00 Tax
BDT 3,099.00 tax incl.
More
In-Stock
In stock: 15

Reference: 0031

Jumper Wire 40 Pcs Set 20cm

(0)
3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female
BDT 100.00
BDT 100.00 tax incl.
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 100.00 tax incl.
BDT 100.00 tax incl.
BDT 0.00 Tax
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 0.00 Tax
BDT 100.00 tax incl.
More
In-Stock
In stock: 215

Reference: RBD-2412

USB ASP AVR Programming Device for ATMEL Processors Arduino

(0)
Compatible Chips:ATMega Series Tiny Series Classic Series CAN Series PWM Series You can also use this to recover your Arduino Bootloader
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1721

HL-K18 PIC18F4520 Microcontroller Development Board Integrated Kit Emulator

(0)
PIC Development Board PIC18F4520 MCU Learning Board HL-K18 Experiment Board Integrated Kit2 Emulator
BDT 8,899.00
BDT 8,899.00 tax incl.
BDT 8,899.00 tax excl.
BDT 8,899.00 tax excl.
BDT 8,899.00 tax incl.
BDT 8,899.00 tax incl.
BDT 0.00 Tax
BDT 8,899.00 tax excl.
BDT 8,899.00 tax excl.
BDT 0.00 Tax
BDT 8,899.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

(0)
Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)
BDT 10,590.00
BDT 10,590.00 tax incl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax incl.
BDT 10,590.00 tax incl.
BDT 0.00 Tax
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 0.00 Tax
BDT 10,590.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0041

Smart Speed Detecting Sensor for Arduino

(0)
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In Stock
In stock: 16

Reference: RBD-2413

FTDI Basic Breakout USBTTL 6PIN 5V Module Fio/Pro/RGB/Lilypad Programmer

(0)
Upgrade your Arduino Pro Mini, Lilypad and drone or RC aircraft with the ultimate ease and precision offered by our latest MWC MultiWii Lite/SE Flight Control Board Config Uploader. This innovative device comes packed with features designed to simplify the uploading and modification process. Save time and effort with the board's MINIUSB FTDI Basic USB...
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-1748

80W Soldering Iron Kit Set Multimeter with PU Bag

(0)
80W Soldering Iron Soldering Iron Kit Set with Multimeter PU Bag
BDT 4,250.00
BDT 4,250.00 tax incl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax incl.
BDT 4,250.00 tax incl.
BDT 0.00 Tax
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 0.00 Tax
BDT 4,250.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-1219

3.5inch LCD Display Shield for Arduino

(0)
Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...
BDT 1,680.00
BDT 1,680.00 tax incl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax incl.
BDT 1,680.00 tax incl.
BDT 0.00 Tax
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 0.00 Tax
BDT 1,680.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0102

Fingerprint Scanner - 5V TTL (GT-511C1)

(0)
Description: Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they're usually unreliable or difficult to implement. Well not anymore! We've found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed it into your next project.
BDT 3,300.00
BDT 3,300.00 tax incl.
BDT 3,300.00 tax excl.
BDT 3,300.00 tax excl.
BDT 3,300.00 tax incl.
BDT 3,300.00 tax incl.
BDT 0.00 Tax
BDT 3,300.00 tax excl.
BDT 3,300.00 tax excl.
BDT 0.00 Tax
BDT 3,300.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2416

WEMOS CH340G Breakout 5V 3.3V USB to Serial Module

(0)
5V (The max current depends on your USB port, usually 500mA) 3.3V (Using LDO, 300mA MAX) Use CH340G with stable performance. Driver: 1. CH340G USB to UART driver
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-1762

Mini BD243 Bubble 9-12V Tesla Coil Electronics Wireless PCB Module

(0)
Input voltage(V): 9-12 It can produce high-temperature PCB board size(cm):  3.1 x 4 It is convenient for fans to install high efficiency Weight(g): 20This product is shipped as unassembled and requires soldering to be completed. You will need to do the soldering yourself.
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1251

7 Inch TFT IPS Monitor for Raspberry Pi

(0)
Input Voltage: DC 7.4~35V. Input Current: DC 0.5A-1.5A. Power Consumption: ≤8W Watts. Resolution: 1024 x 600. Aspect Ratio: 16:9 & 4:3. Contrast Ratio: 500:1. Monitor Mount is not Available.
BDT 6,390.00
BDT 6,390.00 tax incl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax incl.
BDT 6,390.00 tax incl.
BDT 0.00 Tax
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 0.00 Tax
BDT 6,390.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0103

M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module

(0)
This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01...
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 102

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Follow us on Facebook