Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 5.00 - BDT 1,600,000.00

Categories

Categories

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 4,000 kg

  • Banner

Active filters
  • Categories: Arduino Boards
  • Categories: Power Module & Adapter
  • Categories: Programmer
  • Categories: Robots
  • Categories: Sensors
  • Categories: Solar Panel

Reference: RBD-1646

AC-DC 5V 700mA 3.5W Precision Buck Converter AC 220V to 5v DC Step Down Transformer Power Supply Module

(0)
Input Voltage: 220VAC Output Voltage: 5 VDC. Output Power: 3.5W. Output overload and short circuit protection.
BDT 119.00
BDT 119.00 tax incl.
BDT 119.00 tax excl.
BDT 119.00 tax excl.
BDT 119.00 tax incl.
BDT 119.00 tax incl.
BDT 0.00 Tax
BDT 119.00 tax excl.
BDT 119.00 tax excl.
BDT 0.00 Tax
BDT 119.00 tax incl.
More
In-Stock
In stock: 39

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

(0)
Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-2655

ST-LINK/V2 CN In-Circuit Debugger/Programmer for STM8 and STM32

(0)
5V power supplied by a USB connector USB 2.0 full speed compatible interface USB standard A to mini B cable 1.65V to 5.5V application voltage supported on SWIM interface SWIM low speed and high-speed modes supported Made in China To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might...
BDT 1,750.00
BDT 1,750.00 tax incl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax incl.
BDT 1,750.00 tax incl.
BDT 0.00 Tax
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 0.00 Tax
BDT 1,750.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1653

12V DC Switching Power Supply Mean Well RS-50-12

(0)
Input Voltage: 88~264V/47~63Hz Output Voltage: 12V/4.2A DC Output Power: 50W
BDT 2,250.00
BDT 2,250.00 tax incl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax incl.
BDT 2,250.00 tax incl.
BDT 0.00 Tax
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 0.00 Tax
BDT 2,250.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0694

ESP8266 CH340 NodeMCU Wifi Module Lua V3

(0)
Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 275

Reference: RBD-0344

Weighing Sensor 24 Bit Load Cell Amplifier HX711

(0)
Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit. RoboticsBD
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-2714

ST-LINK V2.1 Emulator Debugger Programmer for STM32

(0)
The ST-LINK V2.1 emulator offers comprehensive support for all STM32 models, providing versatile functionality for development and debugging tasks. This product is a clone and might not support STM32Cube.
BDT 1,690.00
BDT 1,690.00 tax incl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax incl.
BDT 1,690.00 tax incl.
BDT 0.00 Tax
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 0.00 Tax
BDT 1,690.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-1655

5V 4000mA AC/DC Power Adapter

(0)
Input Voltage (V): 100 ~ 270 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 5V 4A. Load regulation (%): ±5. Input Plug: 2-Pin US type. Output Plug: DC Jack 5.5mm.
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-1255

NodeMCU ESP8266 with 0.96 Inch OLED Module Development Board

(0)
Integrated 0.96″ OLED Micro USB connection Compatible with Arduino Compatible with NodeMCU(Lua for ESP8266) Input Power 5V Compatible for Arduino Compatible with NodeMCU(Lua for ESP8266)A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please...
BDT 1,250.00
BDT 1,250.00 tax incl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax incl.
BDT 1,250.00 tax incl.
BDT 0.00 Tax
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 0.00 Tax
BDT 1,250.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 309.00
BDT 309.00 tax incl.
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 309.00 tax incl.
BDT 309.00 tax incl.
BDT 0.00 Tax
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 0.00 Tax
BDT 309.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-2746

QL2006 USB & RS232 PIC ICSP Programmer Emulator for Microchip MCU Programming

(0)
QL-2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.QL-2006 is applicable for almost all...
BDT 13,900.00
BDT 13,900.00 tax incl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax incl.
BDT 13,900.00 tax incl.
BDT 0.00 Tax
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 0.00 Tax
BDT 13,900.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-1821

NodeMcu Lua WIFI Board Based on ESP8266 CP2102 Module

(0)
Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled Arduino-like hardware IO Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units Onboard USB to serial chip to easily program and upload codes from the Arduino IDE Easy to use breadboard friendly form...
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-1673

IP5328P Charging Treasure Two-way Fast Charging Module Power Bank Controller

(0)
Supports Qualcomm Quick Charge 3.0 fast charging protocol Has both "USB type C" and "Micro USB" port for charging power bank battery Power bank battery can be fast-charged (up to 15 watts) with QC 3.0 supported fast chargers  Two "USB A" ports with maximum 18-watt power delivery from the power bank  Power bank battery level indicator LEDs and power on/off...
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0352

Knock Sensor Module KY-031

(0)
Detect shocks with the spring and send a signal to Controller Board Operating voltage: 3.3V-5V Digital output Bolt holes for easy installation. RoboticsBD
BDT 69.00
BDT 69.00 tax incl.
BDT 69.00 tax excl.
BDT 69.00 tax excl.
BDT 69.00 tax incl.
BDT 69.00 tax incl.
BDT 0.00 Tax
BDT 69.00 tax excl.
BDT 69.00 tax excl.
BDT 0.00 Tax
BDT 69.00 tax incl.
More
In-Stock
In stock: 62

Reference: RBD-1421

3S 20A 12.6V Cell 18650 Li-ion Lithium Battery Charger BMS Protection PCB Board

(0)
3S 11.1V 12.6V 20A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery). Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery). Continuous discharge current (upper limit): 20A (if the cooling environment is not good, please reduce the load current use). Continuous...
BDT 300.00
BDT 300.00 tax incl.
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 300.00 tax incl.
BDT 300.00 tax incl.
BDT 0.00 Tax
BDT 300.00 tax excl.
BDT 300.00 tax excl.
BDT 0.00 Tax
BDT 300.00 tax incl.
More
In-Stock
In stock: 137

Reference: RBD-1402

NodeMCU ESP8266 Expansion Base Board

(0)
The perfect solution for breaking out the pins from Lua V3 Nodemcu. Lead-out all the IO ports of the ESP-12E development board Lead out the pins of 5V and 3.3V power supply Convenient to connect with peripheral modules Onboard 5V / 1A DC-DC step-down converter circuit Onboard power indicator With DC power jack 6-24V.
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
In-Stock
In stock: 51

Reference: RBD-0354

TSL2561 Luminosity & Infrared Light integrating sensor

(0)
Approximates Human eye Response Extremely wide dynamic range 1 to 600,000,000 Counts Lux Range: 188u Lux sensitivity, up to 88,000 Lux input measurements Voltage range: 3.3-5V into the onboard regulator This board/chip uses I2C 7-bit addresses 0x29 and 0x28. RoboticsBD
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1690

Raspberry Pi 4 Power Supply 5V 3A USB Type C

(0)
ON/OFF switch button on the power adapter.  Very convenient for use. 5V 3A standard power supply for Raspberry Pi 4 Model B. There is CE certification for the power adapter. Best Adapter for Raspberry Pi 4
BDT 700.00
BDT 700.00 tax incl.
BDT 700.00 tax excl.
BDT 700.00 tax excl.
BDT 700.00 tax incl.
BDT 700.00 tax incl.
BDT 0.00 Tax
BDT 700.00 tax excl.
BDT 700.00 tax excl.
BDT 0.00 Tax
BDT 700.00 tax incl.
In-Stock
In stock: 14

Reference: RBD-0948

ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

(0)
Built-in Flash: 32Mbit Power supply: 5V WiFi protocol: IEEE 802.11 b/g/n Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S Logic level: 3.3V A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and...
BDT 470.00
BDT 470.00 tax incl.
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 470.00 tax incl.
BDT 470.00 tax incl.
BDT 0.00 Tax
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 0.00 Tax
BDT 470.00 tax incl.
More
In-Stock
In stock: 195

Reference: RBD-0355

HC-020K Speed Measuring Module With Speed Encoder Kit

(0)
Description:Working voltage: 4.5V to 5.5 V.Transmit tube pressure drop: Vf = 1.6 VTransmit tube current: 20 mASignal output: A, B two way; The TTL levelDistinguish precision: 0.01 mmMeasurement frequency, 100 KHZEncoder diameter: 24 mmEncoder type D hole diameter: 4 mmThe encoder resolution: 20 line
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-2271

ESP32 30P Development Expansion board

(0)
Wide compatibility with ESP32-DevKitC(30P) series boards Safe and reliable with stable power and signal transmission Extended GVS interface for easy connection to various electronic modules and sensors JUMP interface for easy reuse of all pins, making it ideal for DIY projects Versatile and reliable option suitable for a wide range of projects
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-1697

Brand: DFRobot

Breadboard Power Supply 5V/3.3V

(0)
Takes a 6-12V input voltage. Outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard. Powered from 6-12 DC2.1 power jack or from USB power.   The maximum current it can provide is 500mA. 
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0357

GY-ML8511 Ultraviolet Light UV Sensor Module

(0)
Operating voltage (VCC): 3 V to 5V Operating current: 120μA (typical) 190μA (max) Operating Temperature: -40°C ~ +85°C Photodiode sensitive to UV-A and UV-B Embedded operational amplifier Analog voltage output Low supply current (300uA type) and low standby current (0.1uA type) RoboticsBD
BDT 1,700.00
BDT 1,700.00 tax incl.
BDT 1,700.00 tax excl.
BDT 1,700.00 tax excl.
BDT 1,700.00 tax incl.
BDT 1,700.00 tax incl.
BDT 0.00 Tax
BDT 1,700.00 tax excl.
BDT 1,700.00 tax excl.
BDT 0.00 Tax
BDT 1,700.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1702

Raspberry Pi 4 Power Adapter Type C

(0)
Very convenient for use. 5V 1.5A standard power supply for Raspberry Pi 4 Model B. There is CE certification for the power adapter. Best Adapter for Raspberry Pi 4
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
Out-of-Stock
In stock: -11

Reference: RBD-1407

ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640

(0)
Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min. Programmer: ESP32-CAM-MB MICRO USB Download Module The ESP32 CAM does not come pre-assembled with the camera. You'll need to connect the camera ribbon cable to the board, a task which can be...
BDT 848.00
BDT 848.00 tax incl.
BDT 848.00 tax excl.
BDT 848.00 tax excl.
BDT 848.00 tax incl.
BDT 848.00 tax incl.
BDT 0.00 Tax
BDT 848.00 tax excl.
BDT 848.00 tax excl.
BDT 0.00 Tax
BDT 848.00 tax incl.
More
In-Stock
In stock: 110

Reference: RBD-0358

I2C Bi-Directional Logic Level Converter- 2 Channel

(0)
Dimensions: 11×15 x 2 (L x W x H) mm Weight: 1gm Mutual transform between 5V TTL and 3.3V TTL Two channels of logic and high voltage low voltage logic can two-way transform Portable and lightness, with 2 rows 4 pin contact pins
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 83

Reference: RBD-1820

ESP-32S ESP-WROOM-32 Development Board 38P NodeMCU

(0)
38 Pin version 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN Ultra-Low power consumption works perfectly with the IDE A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and instead use the...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-1705

5V Fixed Output DC-DC Buck Step-down Converter

(0)
3A DC-DC Buck Step-down Converter Constant Voltage 5V  Fixed Output Module
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 33

Reference: RBD-0368

Force Sensitive Resistor 0.5"

(0)
Thickness: 0.4mm Trigger Force: 20g, triggered (default resistance<200kΩ)  Pressure Measuring Range: 20g~6kg Static Pressure & Dynamic Pressure Measurement (within the frequency of 10Hz) Initial Resistance: >10MΩ Activation Time: <0.01S Operating Temperature: -40°C~+85°C  Lifespan: >1million times Hysteresis: +10%,(RF+ -RF-)/FR+,1000g...
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-1806

LILYGO® TTGO T-Display ESP32 WiFi And Bluetooth Development Board

(0)
Based on ESP32 240MHz Xtensa dual-core 32-bit microprocessor Operating Voltage: 2.7V – 4.2V Working Current: 60mA Battery Charging Current: 500mA
BDT 2,650.00
BDT 2,650.00 tax incl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax incl.
BDT 2,650.00 tax incl.
BDT 0.00 Tax
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 0.00 Tax
BDT 2,650.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-1723

5V 2A Large Current Wireless Charger Module Wireless Power Supply Module

(0)
Model: XKT-412. Input Voltage: 12V. Output Voltage: 5V. Operating Current: 1.2-2 A. Receive Coil: 3mm, the receiver output 5V / 1A current Normal Use Distance: 2 ~ 10mm Operating Current: 1.2-2 A.
BDT 830.00
BDT 830.00 tax incl.
BDT 830.00 tax excl.
BDT 830.00 tax excl.
BDT 830.00 tax incl.
BDT 830.00 tax incl.
BDT 0.00 Tax
BDT 830.00 tax excl.
BDT 830.00 tax excl.
BDT 0.00 Tax
BDT 830.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-0382

GY-87 10DOF MPU6050 HMC5883L BMP180 Sensor Module

(0)
3-axis Gyro+Acceleration+Magnetic Fiel Air Pressure Module Power supply: 3-5V Build in ultra low noise linear LDO voltage regulator Built-in onboard filters, which reduce noise from motor and other high current electronics You can easily select two I2C address for MPU6050 by soldered jumper. RoboticsBD
BDT 2,250.00
BDT 2,250.00 tax incl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax incl.
BDT 2,250.00 tax incl.
BDT 0.00 Tax
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 0.00 Tax
BDT 2,250.00 tax incl.
More
In-Stock
In stock: 5

Follow us on Facebook