Banner

3.5inch LCD Display Shield for Arduino with Touch

Reference RBD-2551

Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring
Arduino IL9486 Driver
480X320 resolution, clear display
Support 16-bit RGB 65K color display, display rich colors
8-bit parallel bus, faster than serial SPI refresh
On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage
Easy to expand the experiment with SD card slot
Provides an Arduino library with a rich sample program
Military-grade process standards, long-term stable work
Provide underlying driver technical support

Description
Product Details

Description

The 3.5 inch TFT LCD Display Shield for Arduino Uno is fully assembled, tested and ready to go, no soldering! Simply plug it in and load up a library – you’ll have it running in under 10 minutes! Works best with any classic Arduino ATMEGA328 Board. RoboticsBD

So spice up your Arduino UNO project with a beautiful large screen display shield with a built-in microSD card connection. This TFT display is big (3.5″ diagonal) bright (4 white-LED backlights) and colorful (18-bit 262,000 different shades)!

The Display comes with 480×320 pixels with individual pixel control. It has way more resolution than a black and white 128×64 display. Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Features:

3.5″ diagonal LCD TFT display, with bright 4 white-LED backlights, default state: on
It can control the backlight to connect the transistor to a digital pin
480×320 Pixels, with colorful and 18-bit, 262,000 different kinds of shade
8-bit digital interface, plus 4 control lines
IL9486 Driver
With Tocuh

Connect to Arduino:

Interface Definition
Number	Pin Label	Pin Description
1	LCD_RST	LCD bus reset signal, low level reset
2	LCD_CS	LCD bus chip select signal, low level enable
3	LCD_RS	LCD bus command / data selection signal,low level: command, high level: data
4	LCD_WR	LCD bus write signal
5	LCD_RD	LCD bus read signal
6	GND	Power ground
7	5V	5V power input
8	3V3	3.3V power input, this pin can be disconnected
9	LCD_D0	LCD 8-bit data Bit0
10	LCD_D1	LCD 8-bit data Bit1
11	LCD_D2	LCD 8-bit data Bit2
12	LCD_D3	LCD 8-bit data Bit3
13	LCD_D4	LCD 8-bit data Bit4
14	LCD_D5	LCD 8-bit data Bit5
15	LCD_D6	LCD 8-bit data Bit6
16	LCD_D7	LCD 8-bit data Bit7
17	SD_SS	SD card SPI bus chip select signal, low level enable
18	SD_DI	SD card SPI bus MOSI signal
19	SD_DO	SD card SPI bus MISO signal
20	SD_SCK	SD card SPI bus clock signal

Interfacing with Arduino:

Program Download (3.5inch_Arduino_8BIT_Module_ILI9486_MAR3501_V1.1)

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

General Specification
Display Color	RGB 65K color
SKU	MAR3501 Touch Screen
Screen Size	3.5(inch)
Type	TFT
Driver IC	ILI9486
Resolution	480*320 (Pixel)
Module Interface	8-bit parallel interface
Active Area	73.44*48.96(mm)
Module PCB Size	85.49*55.63(mm)
Operating Temperature	-20℃~70℃
Storage Temperature	-40℃~70℃
Operating Voltage	5V/3.3V
Power Consumption	TBD
Product Weight(Package containing)
Shipment Weight	0.053 kg
Shipment Dimensions	14 × 10 × 3 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Documentation:

Package Includes:

1 x 3.5inch Arduino Display-UNO

1 x Stylus.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Product Details

Reference RBD-2551

In stock 19 Items

Specific References

EAN13: 2551

Comments (0)

Grade

No customer reviews for the moment.

16 other products in the same category:

Reference: RBD-2949

STM32 Mini V2.0 STM32F103RCT6 Development Board

(0)

STM32 Mini V2.0 STM32F103RCT6 Part STM32F103RCT6 Manufacturer ST-Microelectronics Core Arm Cortex-M3 Max. Clock Speed 72MHz Package UFQFPN 64 pinsWarning: The +5V pins on this board are directly connected to the +5V pin of the USB connector. There is no protection in place. Do not power this board through USB and an external power supply at the same time.

BDT 2,100

BDT 2,100 tax incl.

BDT 2,100 tax excl.

BDT 2,100 tax incl.

BDT 0 Tax

BDT 2,100 tax excl.

BDT 0 Tax

BDT 2,100 tax incl.

In stock

In stock: 7

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)

Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.

BDT 490

BDT 490 tax incl.

BDT 490 tax excl.

BDT 490 tax incl.

BDT 0 Tax

BDT 490 tax excl.

BDT 0 Tax

BDT 490 tax incl.

In-Stock

In stock: 119

Reference: RBD-3615

YwRobot Nano Multifunctional Electronic Piano Expansion Board Compatible with Arduino Nano

(0)

The YwRobot Mini Piano Expansion Board is an all-in-one learning and development platform designed for use with the Arduino Nano. It combines sound, input, visual feedback, and display functions in one compact module—ideal for music-themed electronics projects, STEM education, and prototyping. Note: Arduino Nano, OLED display, and other modules shown in...

BDT 2,250

BDT 2,250 tax incl.

BDT 2,250 tax excl.

BDT 2,250 tax incl.

BDT 0 Tax

BDT 2,250 tax excl.

BDT 0 Tax

BDT 2,250 tax incl.

Last items in stock

In stock: 1

Reference: RBD-3725

ESP32 Lite V1.0.0 Development Board – Type-C, WiFi + Bluetooth, ESP32 Rev1, 4MB Flash

(0)

The ESP32 Lite V1.0.0 Development Board is a compact and cost-effective WiFi + Bluetooth solution based on the ESP32 Rev1 chip. With 4MB Flash memory, integrated RF antenna, and dual-mode Bluetooth, this board delivers strong wireless performance for IoT, smart home, and embedded projects.

BDT 515

BDT 515 tax incl.

BDT 515 tax excl.

BDT 515 tax incl.

BDT 0 Tax

BDT 515 tax excl.

BDT 0 Tax

BDT 515 tax incl.

In stock

In stock: 8

Reference: RBD-2752

Arduino Uno R4 Minima

(0)

Arduino Uno R4 Minima (Clone) powered by Renesas RA4M1 Arm® Cortex®-M4 microcontroller 32-bit architecture with 48 MHz clock, 256 KB Flash, and 32 KB RAM Fully compatible with UNO R3 shields, accessories, and 5V operating voltage On-board peripherals: 12-bit DAC, CAN BUS, OP AMP, RTC, HID support Wider input voltage range: 6–24V with USB-C or barrel jack...

BDT 1,650

BDT 1,650 tax incl.

BDT 1,650 tax excl.

BDT 1,650 tax incl.

BDT 0 Tax

BDT 1,650 tax excl.

BDT 0 Tax

BDT 1,650 tax incl.

In-Stock

In stock: 30

- BDT 10 Reduced price

Reference: RBD-1809

Digispark Pro - ATtiny167 with Micro USB

(0)

Digispark Pro ATtiny167 Micro USB 16MHz

BDT 539 BDT 549

BDT 549 BDT 539 tax incl.

BDT 549 BDT 539 tax excl.

BDT 549 BDT 539 tax incl.

BDT 0 BDT 0 Tax

BDT 549 BDT 539 tax excl.

BDT 0 BDT 0 Tax

BDT 549 BDT 539 tax incl.

In-Stock

In stock: 24

Reference: RBD-3710

LGT8F328P Development Board- CH340- Type-C

(0)

The LGT8F328P Development Board – CH340 – Type-C is a powerful and cost-effective alternative to the Arduino Nano, offering enhanced performance while maintaining full compatibility with the Arduino IDE. Built around the LGT8F328P microcontroller, this board provides higher speed, a 12-bit ADC for more precise analog measurements, and an integrated DAC...

BDT 390

BDT 390 tax incl.

BDT 390 tax excl.

BDT 390 tax incl.

BDT 0 Tax

BDT 390 tax excl.

BDT 0 Tax

BDT 390 tax incl.

In stock

In stock: 25

Reference: RBD-4185

ESP32-WROVER-E ESP32-DEVKITC Core Board

(0)

The ESP32-WROVER-E ESP32-DEVKITC Core Board is a powerful development board based on the ESP32-WROVER-E module, designed for Wi-Fi and Bluetooth–enabled embedded applications. With a dual-core ESP32 MCU and onboard PSRAM support, this board is well suited for memory-intensive projects such as IoT gateways, data logging, display-based systems, and wireless...

BDT 950

BDT 950 tax incl.

BDT 950 tax excl.

BDT 950 tax incl.

BDT 0 Tax

BDT 950 tax excl.

BDT 0 Tax

BDT 950 tax incl.

In stock

In stock: 29

Reference: RBD-3422

STM32F103C8T6 Type-C Imported Microcontroller Blue Pill Board

(0)

STM32F103C8T6 Type-C Imported Blue Pill original STMicroelectronics MCU 72MHz ARM Cortex-M3 with 64KB Flash & 20KB SRAM USB Type-C interface for modern programming & power Supports USART, SPI, I2C, CAN, USB communication Dual 12-bit ADC with up to 16 channels Ideal for IoT, robotics, automation & embedded projects

BDT 480

BDT 480 tax incl.

BDT 480 tax excl.

BDT 480 tax incl.

BDT 0 Tax

BDT 480 tax excl.

BDT 0 Tax

BDT 480 tax incl.

In-Stock

In stock: 30

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)

Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...

BDT 350

BDT 350 tax incl.

BDT 350 tax excl.

BDT 350 tax incl.

BDT 0 Tax

BDT 350 tax excl.

BDT 0 Tax

BDT 350 tax incl.

In-Stock

In stock: 12

Arduino Nano Every Original Robotics Bangladesh

Reference: RBD-3986

Brand: Arduino Official

Arduino Nano Every Original

(0)

The Arduino Nano is the preferred board for many projects requiring a small and easy to use microcontroller board. The small footprint and low price, make the Nano Every particularly suited for wearable inventions, low cost robotics, electronic musical instruments, and general use to control smaller parts of a larger projects.Imported from DFrobotMade in...

BDT 4,150

BDT 4,150 tax incl.

BDT 4,150 tax excl.

BDT 4,150 tax incl.

BDT 0 Tax

BDT 4,150 tax excl.

BDT 0 Tax

BDT 4,150 tax incl.

In stock

In stock: 5

Reference: RBD-0948

ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

(0)

Built-in Flash: 32Mbit Power supply: 5V WiFi protocol: IEEE 802.11 b/g/n Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S Logic level: 3.3V A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and...

BDT 427

BDT 427 tax incl.

BDT 427 tax excl.

BDT 427 tax incl.

BDT 0 Tax

BDT 427 tax excl.

BDT 0 Tax

BDT 427 tax incl.

In-Stock

In stock: 406

STM32F411E Discovery Kit with STM32F411VET6 Cortex-M4F Microcontroller Robotics Bangladesh

Reference: RBD-3170

Brand: ST Microelectronics

STM32F411E Discovery Kit with STM32F411VET6 Cortex-M4F Microcontroller

(0)

STM32F411E Discovery Kit featuring the powerful STM32F411VET6 Cortex-M4F microcontroller. 100 MHz ARM Cortex-M4F core with 512 KB Flash and 128 KB RAM for advanced embedded projects. Integrated motion sensors (accelerometer + gyroscope) for robotics and motion applications. Onboard audio system with MEMS microphone and DAC audio converter for multimedia...

BDT 4,966

BDT 4,966 tax incl.

BDT 4,966 tax excl.

BDT 4,966 tax incl.

BDT 0 Tax

BDT 4,966 tax excl.

BDT 0 Tax

BDT 4,966 tax incl.

Last items in stock

In stock: 3

Raspberry Pi Pico 2W Robotics Bangladesh

Reference: RBD-3207

Brand: Raspberry Pi Official

Raspberry Pi Pico 2W

(0)

Raspberry Pi Pico 2W – next-generation wireless microcontroller powered by RP2350 dual-core processor (Arm Cortex-M33 or RISC-V Hazard3). Features 2.4GHz Wi-Fi 802.11n and Bluetooth 5 (BLE + Classic) for wireless IoT applications. Includes 520KB SRAM and 4MB QSPI Flash for larger, more complex projects. Supports C/C++, CircuitPython, and MicroPython, with...

BDT 1,745

BDT 1,745 tax incl.

BDT 1,745 tax excl.

BDT 1,745 tax incl.

BDT 0 Tax

BDT 1,745 tax excl.

BDT 0 Tax

BDT 1,745 tax incl.

In-Stock

In stock: 75

Reference: RBD-1131

Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm

(0)

Up to 480 Mbps data transfer rate. USB Type: Type-A to Mini-B Weight: 15 gm Length: 30 cm Exclusively designed for Arduino boards.

BDT 90

BDT 90 tax incl.

BDT 90 tax excl.

BDT 90 tax incl.

BDT 0 Tax

BDT 90 tax excl.

BDT 0 Tax

BDT 90 tax incl.

In-Stock

In stock: 166

Reference: RBD-3421

STM32F103C6T6 Micro-B Domestic Microcontroller Blue Pill Board

(0)

STM32F103C6T6 Blue Pill Micro-B Domestic 32-bit ARM Cortex-M3 MCU 72MHz clock speed with 32KB Flash & 10KB SRAM Micro-B USB interface for easy programming & communication Dual 12-bit ADC with up to 16 channels Supports CAN, SPI, I2C, USART, USB interfaces Cost-effective solution for embedded, IoT & automation projects

BDT 320

BDT 320 tax incl.

BDT 320 tax excl.

BDT 320 tax incl.

BDT 0 Tax

BDT 320 tax excl.

BDT 0 Tax

BDT 320 tax incl.

In-Stock

In stock: 39

Frequently purchased together
Products from the same category

- BDT 100 Reduced price

Reference: RBD-0009

Arduino Mega 2560 R3

(0)

54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.

BDT 1,788 BDT 1,888

BDT 1,888 BDT 1,788 tax incl.

BDT 1,888 BDT 1,788 tax excl.

BDT 1,888 BDT 1,788 tax incl.

BDT 0 BDT 0 Tax

BDT 1,888 BDT 1,788 tax excl.

BDT 0 BDT 0 Tax

BDT 1,888 BDT 1,788 tax incl.

In-Stock

In stock: 6

- BDT 20 Reduced price

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)

3D Printed Bumper: Designed for Arduino Uno R3 boards Short Circuit Protection: Prevents accidental short circuits on conductive surfaces Secure Press-Fit: Ensures a snug fit while allowing easy removal Scratch Protection: Protects surfaces from scratches caused by the board Arduino Uno R3 is not included.

BDT 30 BDT 50

BDT 50 BDT 30 tax incl.

BDT 50 BDT 30 tax excl.

BDT 50 BDT 30 tax incl.

BDT 0 BDT 0 Tax

BDT 50 BDT 30 tax excl.

BDT 0 BDT 0 Tax

BDT 50 BDT 30 tax incl.

In-Stock

In stock: 29

Reference: RBD-0995

LDR 5 mm Light Depending Resistor

(0)

Diameter: 5mm No. of Pins: 2 Type of Mounting: PCB Through Hole Maximum Operating Temperature: +800°C (Approx.) Dark resistance:1-20 Mohm

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 1101

Reference: RBD-1153

Breadboard Jumper Wire Set

(0)

135 quality jumper Color: red, orange, yellow, green, blue, purple, gray, brown, white. Box size: 165 × 55 × 10 (LxWxH) mm. 140 pcs of 22 AWG solid wires

BDT 190

BDT 190 tax incl.

BDT 190 tax excl.

BDT 190 tax incl.

BDT 0 Tax

BDT 190 tax excl.

BDT 0 Tax

BDT 190 tax incl.

In-Stock

In stock: 384

Reference: RBD-1162

15G Solid Rosin Welding Soldering Flux Paste High Purity

(0)

Net Content: 15g Paste Color: Brown Does not create High Smoke Does not create Foul/Bad Smell No Residual Waste High-Quality Soldering Additives & Activators for effective soldering Useful for general purpose soldering, electrical wires, components, and cables etc

BDT 10

BDT 10 tax incl.

BDT 10 tax excl.

BDT 10 tax incl.

BDT 0 Tax

BDT 10 tax excl.

BDT 0 Tax

BDT 10 tax incl.

In-Stock

In stock: 130

Reference: RBD-1171

Solder Sucker- desoldering pump.

(0)

New Solder Sucker Desoldering Pump Tool Removal Vacuum Soldering Iron Desolver Metal Body, high sucting power, light weight. RoboticsBD Back pull pattern for the inner spring instantaneous suction is strong. Slimline outlook, airtight structure allow one-headed operation. All metal construction is ideal for heavy use including production re-work and...

BDT 85

BDT 85 tax incl.

BDT 85 tax excl.

BDT 85 tax incl.

BDT 0 Tax

BDT 85 tax excl.

BDT 0 Tax

BDT 85 tax incl.

In-Stock

In stock: 30

Reference: RBD-2040

LCD Graphic 128x64 Display KS0108 12864A

(0)

Blue background with 128 x 64 'monochrome' white pixels Low power white LED backlight The LCD is driven by onboard 5V parallel interface chipset KS0108 and KS0107. They are extremely common and well documented

BDT 1,080

BDT 1,080 tax incl.

BDT 1,080 tax excl.

BDT 1,080 tax incl.

BDT 0 Tax

BDT 1,080 tax excl.

BDT 0 Tax

BDT 1,080 tax incl.

In-Stock

In stock: 11

Reference: RBD-0094

Arduino Uno R3

(0)

The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

BDT 988

BDT 988 tax incl.

BDT 988 tax excl.

BDT 988 tax incl.

BDT 0 Tax

BDT 988 tax excl.

BDT 0 Tax

BDT 988 tax incl.

In-Stock

In stock: 480

3.5inch LCD Display Shield for Arduino

(0)

Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...

BDT 1,680

BDT 1,680 tax incl.

BDT 1,680 tax excl.

BDT 1,680 tax incl.

BDT 0 Tax

BDT 1,680 tax excl.

BDT 0 Tax

BDT 1,680 tax incl.

In-Stock

In stock: 9

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

(0)

Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.

BDT 3,099

BDT 3,099 tax incl.

BDT 3,099 tax excl.

BDT 3,099 tax incl.

BDT 0 Tax

BDT 3,099 tax excl.

BDT 0 Tax

BDT 3,099 tax incl.

In-Stock

In stock: 8

Sold-out

Reference: RBD-2465

TFT LCD 2.8″ 240×320 RGB SPI Display with Touchscreen

(0)

2.8″ TFT LCD with 240×320 full-color RGB resolution Integrated resistive touchscreen for interactive projects SPI interface for fast communication and smooth graphics Compatible with Arduino, ESP32, STM32, Raspberry Pi, and more Supports popular libraries like Adafruit GFX, TFT_eSPI Ideal for GUIs, menus, control panels, robotics & DIY devices

BDT 1,140

BDT 1,140 tax incl.

BDT 1,140 tax excl.

BDT 1,140 tax incl.

BDT 0 Tax

BDT 1,140 tax excl.

BDT 0 Tax

BDT 1,140 tax incl.

Sold-out

In stock: 0

Follow us on Facebook

Facebook

3.5inch LCD Display Shield for Arduino with Touch

Features:

Connect to Arduino:

Interfacing with Arduino:

Documentation:

Package Includes:

Subscribe To When In Stock

Follow us on Facebook