Home

  • Banner

  • Sold-out
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh
  • Big Easy Driver - Stepper Motor Driver Robotics Bangladesh
  • Big Easy Driver - Stepper Motor Driver Robotics Bangladesh
  • Big Easy Driver - Stepper Motor Driver Robotics Bangladesh
  • Big Easy Driver - Stepper Motor Driver Robotics Bangladesh

Big Easy Driver - Stepper Motor Driver

RBD-0267

  • Bi-polar Microstepping Driver
  • 2A/Phase Max
  • 1.4-1.7A/Phase w/o Heatsink
  • Max Motor Drive Voltage: 30V
  • On-board 5V/3.3V Regulation
  • Low RDS(ON) outputs
  • Automatic current decay mode detection/selection
  • Mixed and Slow current decay modes
  • Synchronous rectification for low power dissipation
  • Internal UVLO
  • Crossover-current protection
  • 3.3 and 5 V compatible logic supply
  • Thermal shutdown circuitry
  • Short-to-ground protection
  • Shorted load protection
  • Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16
BDT 1,600
BDT 1,600 BDT 1,600 BDT 1,600 BDT 1,600
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 1,600 Tax excluded
BDT 1,600 Tax included
BDT 0 Tax
BDT 1,600 Tax excluded
BDT 0 Tax
BDT 1,600 Tax included
Quantity
Sold-out

4 people have purchased this item
There are not enough products in stock
Description

The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It's the next version of the popular Easy Driver board.

Each Big Easy Driver can drive up to a max of 2A per phase of a bi-polar stepper motor. It is a chopper microstepping driver which defaults to 16 step microstepping mode. It can take a maximum motor drive voltage of around 30V, and includes on-board 5V/3.3V regulation, so only one supply is necessary. Although this board should be able to run most systems without active cooling while operating at 1.4-1.7A/phase, a heatsink is required for loads approaching 2A/phase. You can find the recommended heatsink in the related items below.Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Feature:

  1. Bi-polar Microstepping Driver
  2. 2A/Phase Max
  3. 1.4-1.7A/Phase w/o Heatsink
  4. Max Motor Drive Voltage: 30V
  5. On-board 5V/3.3V Regulation

Specification:

  1. Low RDS(ON) outputs
  2. Automatic current decay mode detection/selection
  3. Mixed and Slow current decay modes
  4. Synchronous rectification for low power dissipation
  5. Internal UVLO
  6. Crossover-current protection
  7. 3.3 and 5 V compatible logic supply
  8. Thermal shutdown circuitry
  9. Short-to-ground protection
  10. Shorted load protection
  11. Five selectable step modes: full, 1/2, 1/4, 1/8, and 1/16

Big Easy Driver Hookup Diagram

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Microstepping DriverBi-polar
Phase Current2A/Phase Max
Max Motor Drive Voltage35V
On-board Regulation5V/3.3V
Length (mm)31
Width (mm)36
Height (mm)10
Weight (gm)0.006kg
Shipment Weight0.008 kg
Shipment Dimensions12x8x2.5

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Package Includes :

  • 1 x Big Easy Driver - Stepper Motor Driver

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-0267

Specific References

EAN13
0267
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
Thermoelectric Cooler Peltier Module TEC1-12712 Robotics Bangladesh

Reference: RBD-2382

Thermoelectric Cooler Peltier Module TEC1-12712

(0)
High Efficiency: TEC1-12712 Thermoelectric Peltier Module with 127 semiconductor couples for effective cooling and heating. Versatile Applications: Suitable for cooling CPUs, CCDs, portable refrigerators, medical devices, and more. Wide Temperature Range: Operates between -55°C to 80°C with a maximum temperature differential of 80°C. Compact and Durable:...
BDT 540
BDT 540 tax incl.
BDT 540 tax excl.
BDT 540 tax excl.
BDT 540 tax incl.
BDT 540 tax incl.
BDT 0 Tax
BDT 540 tax excl.
BDT 540 tax excl.
BDT 0 Tax
BDT 540 tax incl.
More Thermoelectric Cooler Peltier Module TEC1-12712
In-Stock
In stock: 23
Thermoelectric Cooler Peltier Module TEC1-12710 Robotics Bangladesh

Reference: RBD-2383

Thermoelectric Cooler Peltier Module TEC1-12710

(0)
Model number: TEC1-12710 Operating Voltage: 12V Maximum Voltage- Umax (V) : 15V Maximum Current- Imax (A) : 10A Maximum Power : 120 W Power Cord: 25 cm.
BDT 559
BDT 559 tax incl.
BDT 559 tax excl.
BDT 559 tax excl.
BDT 559 tax incl.
BDT 559 tax incl.
BDT 0 Tax
BDT 559 tax excl.
BDT 559 tax excl.
BDT 0 Tax
BDT 559 tax incl.
More Thermoelectric Cooler Peltier Module TEC1-12710
In-Stock
In stock: 13
Ball Roller Caster Wheel - 32x49mm Robotics Bangladesh

Reference: RBD-3536

Ball Roller Caster Wheel - 32x49mm

(0)
A caster (or castor) is an undriven wheel that is designed to be attached to the bottom of a larger object (the "vehicle") to enable that object to be moved. The castor wheel is used for places where we need balance.
BDT 110
BDT 110 tax incl.
BDT 110 tax excl.
BDT 110 tax excl.
BDT 110 tax incl.
BDT 110 tax incl.
BDT 0 Tax
BDT 110 tax excl.
BDT 110 tax excl.
BDT 0 Tax
BDT 110 tax incl.
More Ball Roller Caster Wheel - 32x49mm
In stock
In stock: 55
N20 DC Gear Motor Wheel 3PI miniQ Car wheel Tyre Robotics Bangladesh N20 DC Gear Motor Wheel 3PI miniQ Car wheel Tyre Robotics Bangladesh

Reference: RBD-1069

N20 DC Gear Motor Wheel 3PI miniQ Car wheel Tyre

(0)
Wheel Outer Diameter: 44MM Wheel width: 18 mm Tire material: Rubber Color: Black & White Weight: 18 gm Coder Accuracy: 12 pulses per revolution Wheel weight: 19.4 gm.
BDT 80
BDT 80 tax incl.
BDT 80 tax excl.
BDT 80 tax excl.
BDT 80 tax incl.
BDT 80 tax incl.
BDT 0 Tax
BDT 80 tax excl.
BDT 80 tax excl.
BDT 0 Tax
BDT 80 tax incl.
More N20 DC Gear Motor Wheel 3PI miniQ Car wheel Tyre
In-Stock
In stock: 284
Sold-out GY-ML8511 Ultraviolet Light UV Sensor Module Robotics Bangladesh GY-ML8511 Ultraviolet Light UV Sensor Module Robotics Bangladesh

Reference: RBD-0357

GY-ML8511 Ultraviolet Light UV Sensor Module

(0)
Operating voltage (VCC): 3 V to 5V Operating current: 120μA (typical) 190μA (max) Operating Temperature: -40°C ~ +85°C Photodiode sensitive to UV-A and UV-B Embedded operational amplifier Analog voltage output Low supply current (300uA type) and low standby current (0.1uA type) RoboticsBD
BDT 1,700
BDT 1,700 tax incl.
BDT 1,700 tax excl.
BDT 1,700 tax excl.
BDT 1,700 tax incl.
BDT 1,700 tax incl.
BDT 0 Tax
BDT 1,700 tax excl.
BDT 1,700 tax excl.
BDT 0 Tax
BDT 1,700 tax incl.
More GY-ML8511 Ultraviolet Light UV Sensor Module
Sold-out
In stock: 0
One Word Frame Servo Bracket Robotics Bangladesh

Reference: RBD-2007

One Word Frame Servo Bracket

(0)
Head Bracket 2mm Hard aluminum  Sandblasting SurfaceMultifunctional Bracket Click here Long U Bracket Click here Short U Bracket Click here L-shaped Servo Bracket Click here Oblique U Servo Bracket Click here U Beam Servo Bracket Click here Humanoid Robot Feet Servo Bracket Click here One Word Frame Servo Bracket Click here Bearing for Servo Motor...
BDT 80
BDT 80 tax incl.
BDT 80 tax excl.
BDT 80 tax excl.
BDT 80 tax incl.
BDT 80 tax incl.
BDT 0 Tax
BDT 80 tax excl.
BDT 80 tax excl.
BDT 0 Tax
BDT 80 tax incl.
More One Word Frame Servo Bracket
In-Stock
In stock: 95
Online only N20 Motor Mounting Bracket Robotics Bangladesh N20 Motor Mounting Bracket Robotics Bangladesh

Reference: RBD-1071

N20 Motor Mounting Bracket

(0)
Height: 11mm Width : 25mm Material: high-quality plastic
BDT 70
BDT 70 tax incl.
BDT 70 tax excl.
BDT 70 tax excl.
BDT 70 tax incl.
BDT 70 tax incl.
BDT 0 Tax
BDT 70 tax excl.
BDT 70 tax excl.
BDT 0 Tax
BDT 70 tax incl.
More N20 Motor Mounting Bracket
In-Stock
In stock: 117
USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK Robotics Bangladesh

Reference: RBD-0108

USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK

(0)
Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host) Supports HID devices, such as keyboards, mice, joysticks, etc. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard...
BDT 850
BDT 850 tax incl.
BDT 850 tax excl.
BDT 850 tax excl.
BDT 850 tax incl.
BDT 850 tax incl.
BDT 0 Tax
BDT 850 tax excl.
BDT 850 tax excl.
BDT 0 Tax
BDT 850 tax incl.
More USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK
In-Stock
In stock: 33
Mini Round Double Deck Chassis Kit 2WD Robotics Bangladesh Mini Round Double Deck Chassis Kit 2WD Robotics Bangladesh

Reference: RBD-0581

Mini Round Double Deck Chassis Kit 2WD

(0)
Outline Size: 135 x 135 x 80mm The round acrylic plate diameter: 130mm Another acrylic plate size: 135 x 75mm
BDT 890
BDT 890 tax incl.
BDT 890 tax excl.
BDT 890 tax excl.
BDT 890 tax incl.
BDT 890 tax incl.
BDT 0 Tax
BDT 890 tax excl.
BDT 890 tax excl.
BDT 0 Tax
BDT 890 tax incl.
More Mini Round Double Deck Chassis Kit 2WD
In-Stock
In stock: 7
1 pcs Smart Robot Rubber Wheel Support Stepper Motor and DC Motor Robotics Bangladesh 1 pcs Smart Robot Rubber Wheel Support Stepper Motor and DC Motor Robotics Bangladesh

Reference: RBD-2394

1 pcs Smart Robot Rubber Wheel Support Stepper Motor and DC Motor

(0)
Versatile Compatibility: Designed to fit DC motors, BO motors, and stepper motors. Durable Construction: Made from robust ABS plastic and rubber for longevity. Optimal Traction: Rubberized surface ensures strong grip for robot movement. Compact Design: Ideal for mini robots and hobby kits with a diameter of 48mm. Easy Installation: Compatible with D-shaft...
BDT 250
BDT 250 tax incl.
BDT 250 tax excl.
BDT 250 tax excl.
BDT 250 tax incl.
BDT 250 tax incl.
BDT 0 Tax
BDT 250 tax excl.
BDT 250 tax excl.
BDT 0 Tax
BDT 250 tax incl.
More 1 pcs Smart Robot Rubber Wheel Support Stepper Motor and DC Motor
In-Stock
In stock: 23
DC12V N20 Gear Motor 200 RPM & Mount Bracket & 43mm Wheel Robotics Bangladesh

Reference: RBD-3795

DC12V N20 Gear Motor 200 RPM & Mount Bracket & 43mm Wheel

(0)
N20 Micro Gear 12V 200RPM DC Motor (High Torque) Mounting Bracket for N20 Micro Gear motors 3PI miniQ Car wheel Tyre 44mm N20 DC Gear Motor Wheel
BDT 490
BDT 490 tax incl.
BDT 490 tax excl.
BDT 490 tax excl.
BDT 490 tax incl.
BDT 490 tax incl.
BDT 0 Tax
BDT 490 tax excl.
BDT 490 tax excl.
BDT 0 Tax
BDT 490 tax incl.
More DC12V N20 Gear Motor 200 RPM & Mount Bracket & 43mm Wheel
In-Stock
In stock: 31
Lockitron Mechanical Assembly Robotics Bangladesh Lockitron Mechanical Assembly Robotics Bangladesh

Reference: RBD-0264

Brand: SparkFun Electronics

Lockitron Mechanical Assembly

(0)
Lockitron Mechanical Assembly The Lockitron Mechanical Assembly from SparkFun is a perfect solution for the DIY home automation or Internet of Things (IoT) enthusiast, whether you want to make your life easier by not awkwardly fumbling with keys or add some extra security in your home with three-factor authentication.
BDT 6,000
BDT 6,000 tax incl.
BDT 6,000 tax excl.
BDT 6,000 tax excl.
BDT 6,000 tax incl.
BDT 6,000 tax incl.
BDT 0 Tax
BDT 6,000 tax excl.
BDT 6,000 tax excl.
BDT 0 Tax
BDT 6,000 tax incl.
More Lockitron Mechanical Assembly
Last items in stock
In stock: 1
Rover 5 Robot Platform 2 Motors 2 Encoders Robotics Bangladesh Rover 5 Robot Platform 2 Motors 2 Encoders Robotics Bangladesh

Reference: RBD-1256

Brand: SparkFun Electronics

Rover 5 Robot Platform 2 Motors 2 Encoders

(0)
Arduino Compatible Easy to assemble Adjustable gear box angles 2 independent DC motors 2 independent hall-effect encoders Thick rubber tank treads 10Kg/cm stall torque per motor
BDT 4,699
BDT 4,699 tax incl.
BDT 4,699 tax excl.
BDT 4,699 tax excl.
BDT 4,699 tax incl.
BDT 4,699 tax incl.
BDT 0 Tax
BDT 4,699 tax excl.
BDT 4,699 tax excl.
BDT 0 Tax
BDT 4,699 tax incl.
More Rover 5 Robot Platform 2 Motors 2 Encoders
Last items in stock
In stock: 1
Sold-out Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600 Robotics Bangladesh Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600 Robotics Bangladesh

Reference: RBD-0270

Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600

(0)
AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer CP2102 : USB TO UART converter PCF8591 : 8-bit AD/DA converter, I2C interface
BDT 3,400
BDT 3,400 tax incl.
BDT 3,400 tax excl.
BDT 3,400 tax excl.
BDT 3,400 tax incl.
BDT 3,400 tax incl.
BDT 0 Tax
BDT 3,400 tax excl.
BDT 3,400 tax excl.
BDT 0 Tax
BDT 3,400 tax incl.
More Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600
Sold-out
In stock: 0
Sold-out 8.5 inch Jumper Wire Robotics Bangladesh 8.5 inch Jumper Wire Robotics Bangladesh

Reference: RBD-1845

8.5 inch Jumper Wire

(0)
The head of the cables is stronger, Don’t worry it will easy to fall. Use for Arduino Or other kinds of circuit experiment. High quality and in good working condition Durable and reusable Easy to install and use
BDT 7
BDT 7 tax incl.
BDT 7 tax excl.
BDT 7 tax excl.
BDT 7 tax incl.
BDT 7 tax incl.
BDT 0 Tax
BDT 7 tax excl.
BDT 7 tax excl.
BDT 0 Tax
BDT 7 tax incl.
More 8.5 inch Jumper Wire
Sold-out
In stock: 0
40mm Wheel for TT Gear Motors Robotics Bangladesh 40mm Wheel for TT Gear Motors Robotics Bangladesh

Reference: RBD-3515

40mm Wheel for TT Gear Motors

(0)
This 40mm Wheel is designed specifically for use with TT gear motors, offering a reliable and lightweight solution for small robotic and DIY mobile platforms. Crafted from durable plastic with a rubber tread, it ensures optimal friction and stability on smooth surfaces, reducing slippage and enhancing control.
BDT 30
BDT 30 tax incl.
BDT 30 tax excl.
BDT 30 tax excl.
BDT 30 tax incl.
BDT 30 tax incl.
BDT 0 Tax
BDT 30 tax excl.
BDT 30 tax excl.
BDT 0 Tax
BDT 30 tax incl.
More 40mm Wheel for TT Gear Motors
In stock
In stock: 172
- BDT 100 Reduced price NEMA 23 23HS5628 8mm Shaft Stepper Motor | Robotics Bangladesh NEMA 23 23HS5628 8mm Shaft Stepper Motor | Robotics Bangladesh

Reference: RBD-0817

Nema 23 23HS5628 8.0mm Shaft Stepper Motor

(0)
Step Angle Step Angle: 1.8 ° Current: 2.8 A/Phase Holding Torque: 10.1 N-cm Detent torque: 3.6 N.cm (Maximum) Lead Wires: 4 Shaft diameter: 8.00 mm
BDT 2,890 BDT 2,990
BDT 2,990 BDT 2,890 tax incl.
BDT 2,990 BDT 2,890 tax excl.
BDT 2,990 BDT 2,890 tax excl.
BDT 2,990 BDT 2,890 tax incl.
BDT 2,990 BDT 2,890 tax incl.
BDT 0 BDT 0 Tax
BDT 2,990 BDT 2,890 tax excl.
BDT 2,990 BDT 2,890 tax excl.
BDT 0 BDT 0 Tax
BDT 2,990 BDT 2,890 tax incl.
More Nema 23 23HS5628 8.0mm Shaft Stepper Motor
In-Stock
In stock: 10
37GB 12V High Torque Gear Motor - 60 RPM Robotics Bangladesh 37GB 12V High Torque Gear Motor - 60 RPM Robotics Bangladesh

Reference: RBD-0390

37GB 12V High Torque Gear Motor - 60 RPM

(0)
DC 12V 60 RPM 37GB-550 Gear Reducer Motor Consumes less current  Higher durability 
BDT 2,200
BDT 2,200 tax incl.
BDT 2,200 tax excl.
BDT 2,200 tax excl.
BDT 2,200 tax incl.
BDT 2,200 tax incl.
BDT 0 Tax
BDT 2,200 tax excl.
BDT 2,200 tax excl.
BDT 0 Tax
BDT 2,200 tax incl.
More 37GB 12V High Torque Gear Motor - 60 RPM
In-Stock
In stock: 16
LCD Keypad Shield for Arduino Robotics Bangladesh

Reference: RBD-0159

LCD Keypad Shield for Arduino

(0)
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...
BDT 329
BDT 329 tax incl.
BDT 329 tax excl.
BDT 329 tax excl.
BDT 329 tax incl.
BDT 329 tax incl.
BDT 0 Tax
BDT 329 tax excl.
BDT 329 tax excl.
BDT 0 Tax
BDT 329 tax incl.
More LCD Keypad Shield for Arduino
In-Stock
In stock: 68
On sale! ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module Robotics Bangladesh

Reference: RBD-0345

ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

(0)
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) RoboticsBD
BDT 194
BDT 194 tax incl.
BDT 194 tax excl.
BDT 194 tax excl.
BDT 194 tax incl.
BDT 194 tax incl.
BDT 0 Tax
BDT 194 tax excl.
BDT 194 tax excl.
BDT 0 Tax
BDT 194 tax incl.
More ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
In-Stock
In stock: 305
- BDT 23 Reduced price Heart Rate Pulse Sensor Module For Arduino Robotics Bangladesh

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 274 BDT 297
BDT 297 BDT 274 tax incl.
BDT 297 BDT 274 tax excl.
BDT 297 BDT 274 tax excl.
BDT 297 BDT 274 tax incl.
BDT 297 BDT 274 tax incl.
BDT 0 BDT 0 Tax
BDT 297 BDT 274 tax excl.
BDT 297 BDT 274 tax excl.
BDT 0 BDT 0 Tax
BDT 297 BDT 274 tax incl.
More Heart Rate Pulse Sensor Module For Arduino
In-Stock
In stock: 68
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Robotics Bangladesh

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350
BDT 350 tax incl.
BDT 350 tax excl.
BDT 350 tax excl.
BDT 350 tax incl.
BDT 350 tax incl.
BDT 0 Tax
BDT 350 tax excl.
BDT 350 tax excl.
BDT 0 Tax
BDT 350 tax incl.
More EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino
In-Stock
In stock: 10
Ohm (Ω) 1/4w Resistors - Pack of 5 Robotics Bangladesh

Reference: 0766

Ohm (Ω) 1/4w Resistors - Pack of 5

(0)
Choose your desire Resistor value from below: 
BDT 5
BDT 5 tax incl.
BDT 5 tax excl.
BDT 5 tax excl.
BDT 5 tax incl.
BDT 5 tax incl.
BDT 0 Tax
BDT 5 tax excl.
BDT 5 tax excl.
BDT 0 Tax
BDT 5 tax incl.
More Ohm (Ω) 1/4w Resistors - Pack of 5
In-Stock
In stock: 4518
You might also like
30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino Robotics Bangladesh 30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino Robotics Bangladesh

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750
BDT 2,750 tax incl.
BDT 2,750 tax excl.
BDT 2,750 tax excl.
BDT 2,750 tax incl.
BDT 2,750 tax incl.
BDT 0 Tax
BDT 2,750 tax excl.
BDT 2,750 tax excl.
BDT 0 Tax
BDT 2,750 tax incl.
More 30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino
In-Stock
In stock: 9
5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh 5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500
BDT 3,500 tax incl.
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 3,500 tax incl.
BDT 3,500 tax incl.
BDT 0 Tax
BDT 3,500 tax excl.
BDT 3,500 tax excl.
BDT 0 Tax
BDT 3,500 tax incl.
More 5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3
In-Stock
In stock: 11
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh

Reference: RBD-1678

A4988 Big Easy Driver Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 399
BDT 399 tax incl.
BDT 399 tax excl.
BDT 399 tax excl.
BDT 399 tax incl.
BDT 399 tax incl.
BDT 0 Tax
BDT 399 tax excl.
BDT 399 tax excl.
BDT 0 Tax
BDT 399 tax incl.
More A4988 Big Easy Driver Stepper Motor Driver
In-Stock
In stock: 45
- BDT 60 Reduced price A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 105 BDT 165
BDT 165 BDT 105 tax incl.
BDT 165 BDT 105 tax excl.
BDT 165 BDT 105 tax excl.
BDT 165 BDT 105 tax incl.
BDT 165 BDT 105 tax incl.
BDT 0 BDT 0 Tax
BDT 165 BDT 105 tax excl.
BDT 165 BDT 105 tax excl.
BDT 0 BDT 0 Tax
BDT 165 BDT 105 tax incl.
More A4988 StepStick Stepper Motor Driver Module
In-Stock
In stock: 18
Sold-out Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Big Easy Driver - Stepper Motor Driver Robotics Bangladesh

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600
BDT 1,600 tax incl.
BDT 1,600 tax excl.
BDT 1,600 tax excl.
BDT 1,600 tax incl.
BDT 1,600 tax incl.
BDT 0 Tax
BDT 1,600 tax excl.
BDT 1,600 tax excl.
BDT 0 Tax
BDT 1,600 tax incl.
More Big Easy Driver - Stepper Motor Driver
Sold-out
In stock: 0
- BDT 35 Reduced price DRV8825 Stepper Motor Driver Module Robotics Bangladesh DRV8825 Stepper Motor Driver Module Robotics Bangladesh

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 159 BDT 194
BDT 194 BDT 159 tax incl.
BDT 194 BDT 159 tax excl.
BDT 194 BDT 159 tax excl.
BDT 194 BDT 159 tax incl.
BDT 194 BDT 159 tax incl.
BDT 0 BDT 0 Tax
BDT 194 BDT 159 tax excl.
BDT 194 BDT 159 tax excl.
BDT 0 BDT 0 Tax
BDT 194 BDT 159 tax incl.
More DRV8825 Stepper Motor Driver Module
In-Stock
In stock: 67
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Robotics Bangladesh

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350
BDT 350 tax incl.
BDT 350 tax excl.
BDT 350 tax excl.
BDT 350 tax incl.
BDT 350 tax incl.
BDT 0 Tax
BDT 350 tax excl.
BDT 350 tax excl.
BDT 0 Tax
BDT 350 tax incl.
More EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino
In-Stock
In stock: 10
L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Robotics Bangladesh L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Robotics Bangladesh

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)
Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
BDT 185
BDT 185 tax incl.
BDT 185 tax excl.
BDT 185 tax excl.
BDT 185 tax incl.
BDT 185 tax incl.
BDT 0 Tax
BDT 185 tax excl.
BDT 185 tax excl.
BDT 0 Tax
BDT 185 tax incl.
More L298N H-Bridge Dual Motor Driver, Stepper Motor Driver
In Stock
In stock: 580
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver Robotics Bangladesh

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 4,650
BDT 4,650 tax incl.
BDT 4,650 tax excl.
BDT 4,650 tax excl.
BDT 4,650 tax incl.
BDT 4,650 tax incl.
BDT 0 Tax
BDT 4,650 tax excl.
BDT 4,650 tax excl.
BDT 0 Tax
BDT 4,650 tax incl.
More Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver
In-Stock
In stock: 39

Follow us on Facebook

Facebook