Quad 2-to-1 multiplexer with common select and enable control Combines four independent 2-input multiplexers in one IC TTL-compatible for reliable high-speed logic operations Ideal for data bus control, arithmetic circuits, and logic switching Provides fast propagation delay for time-critical applications Compact 16-pin DIP package suitable for breadboard...

Rugged chrome-plated metal pushbutton with Red LED ringIdeal for panels up to 1/2" thickEasy installation with a simple drill holeBuilt-in resistor for LEDSupports 3 to 6V for LED operationMomentary pushbutton design

Rated Power 1W Impedance 8ohm Small

Rugged chrome-plated metal pushbutton with Green LED ring Ideal for panels up to 1/2" thick Easy installation with a simple drill hole Built-in resistor for LED Supports 3 to 6V for LED operation Momentary pushbutton design

Size: 5mm Emitted Color : UV View Angle: About 20 - 25 degree. Luminous Intensity: 800mcd-2500mcdSuperbright Ultra Violet LED UV Lamp 5mm 2500mcd 365NM   

Rugged chrome-plated metal pushbutton with Blue LED ring Ideal for panels up to 1/2" thick Easy installation with a simple drill hole Built-in resistor for LED Supports 3 to 6V for LED operation Momentary pushbutton design

5 mm Clear Transparent Round Small Lens (Emitting Angle: 30 degrees) Forward Voltage / Direct Current : DC 1.5 Volt 20 mA (Low Voltage Energy Saving) Infrared Ray 850nm (Luminous Invisible Light) for Night Vision CCTV Security Camera Polarity (1.5 V) : Anode (Longer Part) | Cathode (Shorter Part)

Rugged chrome-plated metal pushbutton with White LED ring Ideal for panels up to 1/2" thick Easy installation with a simple drill hole Built-in resistor for LED Supports 3 to 6V for LED operation Momentary pushbutton design

Wavelength: 850nm Emission Distance: 7 Meters / 23Ft Voltage: DC 1.2-1.3V Polarity: Anode (Longer Part) | Cathode (Shorter Part)

Rugged chrome-plated metal pushbutton with Orange LED ring Ideal for panels up to 1/2" thick Easy installation with a simple drill hole Built-in resistor for LED Supports 3 to 6V for LED operation Momentary pushbutton design

131 powerful instructions – Most Single Clock Cycle Execution 32 x 8 general purpose working registers Fully static operation Up to 20MIPS throughput at 20MHz On-chip 2-cycle multiplier Write/erase cycles: 10,000 flash/100,000 EEPROM Optional boot code section with independent lock bits In system programming by on-chip boot program True read while write...

Resistance:6.8 kOhm Tolerance: 5% Max. Working Voltage: 250V Temperature Coefficient of Resistance: 50PPM/°C

Effortless Quick Connection: Designed for 16mm metal power button switches, ensuring hassle-free assembly. Durable & Reliable Wiring: Features 14cm pre-wired connectors with 5 wires, ideal for 1NO1NC switches with LED. Secure & Stable Fit: Provides a firm connection to prevent loose wiring and accidental disconnections. Versatile Compatibility:...

Current and voltage display in turn, easy and comfortable to use. Small and portable, do not need other power supply. Measuring range: DC 3V – 9V / 0 – 3A (up to 5A ) Portable Device Interface: USB2.0, USB3.0 Product Weight: 0.025 kg Two output ports

The KCD1-1 bistable rocker switch with red indicator is a compact and reliable ON/OFF switch designed for panel mounting in electrical and electronic devices. Featuring a sturdy plastic housing and three terminal pins, it supports easy wiring using soldering or 4.8 mm connectors. The red illuminated rocker provides clear power status indication, making it...

The KCD1-1 blue illuminated rocker switch is a panel-mount ON/OFF switch suitable for modern electronic and electrical applications. With smooth rocker action and a bright blue indicator, it provides both reliable switching and clear visual feedback. Its compact size and standard 3 PIN layout allow easy replacement in existing designs.

IC 74LS164 8-bit Parallel-Out Serial Shift Register with Asynchronous Clear Package / Case: 14-DIP

The KCD1-1 yellow illuminated rocker switch is commonly used where clear warning or standby indication is required. Its bistable ON/OFF action ensures reliable switching, while the yellow light improves visibility in low-light environments. Designed for panel mounting, it fits standard KCD1 cutouts.

Size: 5mm Color: White Head Shape: Round Lens Appearance: Transparent

The KCD1-1 green illuminated rocker switch is widely used to indicate normal operation or power-on status. Featuring a durable plastic housing and stable bistable mechanism, it provides dependable ON/OFF control in electrical and electronic systems. The green indicator ensures clear visibility during operation.

Cell Quantity: 6 Battery type: AA Storage temperature: 25ºC Max Operate temperature: 80ºC Dimensions: 92 x 57 x 15 mm

The KCD11 mini rocker switch is a compact and reliable ON/OFF switch designed for simple power control applications. Featuring a red rocker cap with clear I and O markings, this switch provides easy visual identification of switch status. Its bistable latching mechanism ensures the switch remains in the selected position until manually toggled.

USB Output: 5V 2.1A / 5V 1A(Dual USB interface). Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion batteries only. Screen size: 27mm x 17mm. Charging voltage input: 5V-6V 1A. Step-up voltage output: 5V 1A/2.1A (Dual output, Total 2.5A).

Current: 1A; Voltage : AC 220V / 380V Thread Dia(Approx) : 11mm/0.43" Overall Size(Approx) : 14 x 20mm/0.55" x 0.78"(D*L) Weight : 16g; Package Content : 2 x Keylock Switch

Maximum Repetitive Peak Reverse Voltage (VRRM): 100V. Maximum RMS voltage (VRMS): 75V. Maximum Average Forward Rectified Current(IF(AV)): 0.15A.

Frequency: 16 MHz Tolerance: 30% Operating Temperature Range: -10°C to +60°C Storage Temperature Range: -20°C to +70°C

100uH (0.1mH) 1/2W ±10% Tolerance Axial Lead Epoxy Coated Color Band Identifier Fixed Inductor