P-Channel MOSFET IRF5305 rated for -55V and -31A high-power applications Low Rds(on) of 60mΩ ensures minimal power loss and high efficiency Compatible with 5V microcontrollers for easy control of high-power loads Fast switching speed and rugged HEXFET design for reliability Fully avalanche-rated with wide operating temperature range (-55°C to 175°C) Ideal...

8-channel 10-bit Analog to Digital Converter (ADC) IC Compatible with Raspberry Pi and other microcontrollers via SPI Converts analog sensor signals to digital data with high accuracy Breadboard-friendly DIP package for easy prototyping Ideal for sensors like LM35, LDR, potentiometer, and thermistors Requires only 4 pins for communication, with Python...

KA75330 3.3V voltage detector for reset/enable control Prevents microcontrollers from running at dangerously low voltages Monitors supply voltage and pulls output low below 3.3V Starts operating from as low as 0.8V, ensuring early protection Ideal for Li-Po battery-powered projects and ESP8266/Feather boards Compact, reliable solution for power startup...

TIP120 NPN Darlington transistors, ideal for medium to high-power control Handles up to 60V, 8A peak current, and 5A continuous current High DC gain of ~1000 for efficient amplification and switching BCE pinout for straightforward circuit integration Perfect for driving motors, solenoids, relays, and high-power LEDs Pack of 3 transistors for versatile use...

IRLZ34N N-Channel MOSFET rated at 55V and 30A continuous current Logic-level gate, compatible with 3–5V microcontrollers (Arduino, ESP32, etc.) Very low Rds(on): 35mΩ @ 16A, 10V for efficient switching Supports up to ±16V gate-source voltage and 68W power dissipation Wide operating temperature range: -55°C to +175°C Ideal for controlling high-power loads...

LD1117-3.3 linear voltage regulator in TO-220 package Provides clean, regulated 3.3V output from 4–15V input Supports up to 800mA output current with proper heat sinking Low dropout (~1V) compared to classic 780X series regulators Built-in current limiting and thermal shutdown protection Widely used in electronics for powering 3.3V logic circuits and MCUs

High-power P-channel MOSFET in TO-220 package (FQP27P06) Handles up to 60V drain-source voltage and 25A current (with heat sink) Low Rds(on) of ~70mΩ ensures efficient power switching Threshold voltage supports direct 5V microcontroller logic control Compact TO-220 package for easy breadboard/prototyping use Operates across wide temperature range: -55ºC...

Resistance: 20k Ohm Tolerance: 10 % Temperature coefficient: ±100 ppm/ºC Operating temperature range: -55ºC to +125ºC Mounting type: Through-hole

Resistance: 100 Ohm Tolerance: 10 % Temperature coefficient: ±100 ppm/ºC Operating temperature range: -55ºC to +125ºC Mounting type: Through-hole

Compact Size: Fits perfectly into small spaces for creative DIY projects. Clear Sound: Delivers surprisingly good audio quality for its size. 8Ω Impedance: Compatible with most DIY amplifier boards. Easy Integration: Ideal for embedding into electronics or crafts.

The INA125 is a low-power, high-accuracy instrumentation amplifier with a precision voltage reference. It provides complete bridge excitation and precision differential-input amplification on a single integrated circuit. A single external resistor sets any gain from 4 to 10,000. The INA125 is laser-trimmed for low offset voltage (250µV), low offset drift...

Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Resistance Variation: 7.4K Ohms ±30%. -8.4KOhm Power Rating: 0.5 Watts. This flex sensor is a clone china product. It has little resistance variations, which can be mapped using Arduino. Please review our observations before making your purchase.

Illuminated toggle switch with red LED and protective missile-style cover. Rated for 20A at 12V, ideal for automotive or electronics projects. LED can operate with voltages as low as 3.3V, making it versatile. Stylish red cover adds a professional and safety-oriented design. Suitable for panel mounting in 12mm holes for secure installtion. Perfect for DIY...

Illuminated toggle switch with green LED and protective missile-style cover. Rated for 20A at 12V, suitable for high-current applications. LED operates from 3.3V, compatible with microcontrollers and automotive use. Panel mountable in a 12mm hole for secure and professional installation. Safety cover prevents accidental toggling, adding a sleek control...

Blue illuminated toggle switch with protective missile-style cover. Rated for 20A at 12V DC — reliable for high-current circuits. Built-in LED illumination (works from as low as 3.3V). Secure locking cover prevents accidental activation. Ideal for automotive, marine, and DIY electronic projects. Compact design fits standard 12mm mounting holes. Note: The...

Orange illuminated toggle switch with protective missile-style cover. Rated for 20A at 12V DC — perfect for heavy-duty applications. Built-in LED illumination (works with as low as 3.3). Secure locking cover prevents accidental switching. Ideal for automotive, marine, and robotics control panels. Compact 12mm panel mount design for easy installation....

Quad 2-input OR gate IC based on CMOS 4000 series logic Operates on a wide voltage range: 3V to 18V for versatile applications Features 4 logic gates with low power consumption (15 μA typical) PDIP-14 through-hole package for easy prototyping and breadboard use High-speed operation with 60 ns typical propagation delay Manufactured by Texas Instruments;...

NEC5P4M is a P-type all diffused mold type thyristor.

Model: KCD4 Switch Type: Rocker switch Material: Plastic and Metal Color: Red Voltage: 12V-24V